* Lift Apple TV to pyatv 0.3.2
Update code to use basic new features.
* Support button presses in Apple TV
* Support device authentication
* Convert Apple TV to a component
A media_player platform and a remote platform will be loaded for each
manually configured or discovered device.
* Move device auth to apple_tv component
* Update requirements and coverage config
* Add scan support to apple_tv
* Remove the need to login on the UPC Connect component
* Remove unnecessary imports
* Update the unit tests for the UPC Connect component
* Fix the "302" error with the UPC Connect component
* Fix a flake8 error
* Update the unit tests for the UPC Connect component
The upstream Avion and Decora code has changed to punt retry logic out to
consumers, so update to match. As a bonus, Avion also gains support for
pulling switch configuration off the web rather than requiring manual
configuration.
* Fixed a bug where changing fan speed was not possible
* Bump pymodbus version to 1.3.1 to fix issue #8285
* Changed all modbus components so that they use CONF_SLAVE from const.py
* Add tube_state
Add tube_state sensor
* Final cleanup
* Make corrections
Correct PLATFORM_SCHEMA
* Fix space
* Make test pass
* Correct format of test
Test still failing, don’t understand why
* correct description
* Make test pass
Preferred method below returns None
state = self.hass.states.get('sensor.london_overground')
* Format for hound
* indent
* Make requested changes to test, not working
Test fails with:
AssertionError: assert 0 > 0
where 0 = len([])
Surely I need tube_state.setup_platform ?
* Fixed test
Config was wrong
* Change component name to london_tube
* Update name to london_underground
Make consistent
* cleanup
1. The has_attributes was comparing names to addresses
2. Some errors outside of an except block were using
_LOGGER.except. This will cause an exception itself because there is no
trance context available to the logger
3. Added alias names for the address and state addresses so that they
can be accessed with the same
4. Added return values for the set_int_value and set_percentage methods
to allow error checking similar to the set_value method
5. Added the name of the configured object to the log messages to make
them more meaningful (otherwise multiple similar log messages are
received without any hint as to the target device)
1. The has_attributes was comparing names to addresses
2. Some errors outside of an except block were using
_LOGGER.except. This will cause an exception itself because there is no
trance context available to the logger
3. Added alias names for the address and state addresses so that they
can be accessed with the same
4. Added return values for the set_int_value and set_percentage methods
to allow error checking similar to the set_value method
5. Added the name of the configured object to the log messages to make
them more meaningful (otherwise multiple similar log messages are
received without any hint as to the target device)
* Added camera service calls to arm/disarm the cameras. Entity id is optional so that with a single call we can arm all the cameras or specify a particular entity id to arm if applicable and possible in that camera type.
* Added camera service calls to arm/disarm the cameras. Entity id is optional so that with a single call we can arm all the cameras or specify a particular entity id to arm if applicable and possible in that camera type.
* Added camera service calls to arm/disarm the cameras. Entity id is optional so that with a single call we can arm all the cameras or specify a particular entity id to arm if applicable and possible in that camera type.
* Fixed the spaces and indentation related issues that houndci found
* Fixed the spaces and indentation related issues that houndci found
* Missed the const file which has the macros defined.
* Fixed the CI build error
* Fixed the CI build error because of unused variable in exception case
* Updating the arlo code based on comment from @balloob. Changed the arm and disarm to enable_motion_detection and disable_motion_detection respectively. Similarly fixed the AttributeError handling. Added dummy code to the demo camera also. Moved out the definitions in const.py into the camera __init__ file
* Fixed the comments posted by houndci-bot
* Fixed the comments posted by houndci-bot
* Fixed the comments posted by houndci-bot
* Fixed the comments posted by travis-ci integration bot
* Fixed the comments posted by travis-ci integration bot
* Fixed the comments posted by travis-ci integration bot for demo.py: expected 2 lines, found 1
* Updated code in camera __init__.py to use the get function instead of directly calling the member in the structure.
* Updated code in camera __init__.py
* Posting the updated code for PR based on @balloob's suggestions/recommendations
* Removed the arlo reference from demo code. Copy-paste error
* Removed the unused import found by hound bot
* Expected 2 lines before function, but found only 1.
* Based on @balloob's comments, moved these constants to the camera/arlo.py
* Added test_demo.py to test the motion enabled and motion disabled in camera component
* Fixing issues found by houndci-bot
* Fixing issues found by houndci-bot
* Fixing the code as per @balloob's suggestions
* Fixing the code as per @balloob's suggestions
* Fixing the test_demo failure. Tried to rewrite a base function to enable the motion in __init__.py and missed to add it to as a job.
* Fixing the hound bot comment
* Update arlo.py
* Update arlo.py
* Adding done_message to alert
Adding an optional entry to the config that will send a notification when an
alarm goes from on to off.
* Update test_alert.py
* Update test_alert.py
* Revert "Version bump to 0.49.0.dev0 (#8266)"
This reverts commit 8e4394f173.
* Revert "Adding done_message to alert (#8116)"
This reverts commit 5e56bc7464.
* Revert "Camera services arm disarm including Netgear Arlo (#7961)"
This reverts commit ed20f7e359.
* Revert "Make Android app shortcut use 'Home Assistant' as name instead of just 'Assistant'. (#8261)"
This reverts commit 0bcb7839fb.
* Revert "Version bump to 0.49.0.dev0 (#8266)"
This reverts commit 8e4394f173.
* Revert "Adding done_message to alert (#8116)"
This reverts commit 5e56bc7464.
* Revert "Camera services arm disarm including Netgear Arlo (#7961)"
This reverts commit ed20f7e359.
* Revert "Make Android app shortcut use 'Home Assistant' as name instead of just 'Assistant'. (#8261)"
This reverts commit 0bcb7839fb.
* Adding done_message to alert
Adding an optional entry to the config that will send a notification when an
alarm goes from on to off.
* Update test_alert.py
* Update test_alert.py
* Added camera service calls to arm/disarm the cameras. Entity id is optional so that with a single call we can arm all the cameras or specify a particular entity id to arm if applicable and possible in that camera type.
* Added camera service calls to arm/disarm the cameras. Entity id is optional so that with a single call we can arm all the cameras or specify a particular entity id to arm if applicable and possible in that camera type.
* Added camera service calls to arm/disarm the cameras. Entity id is optional so that with a single call we can arm all the cameras or specify a particular entity id to arm if applicable and possible in that camera type.
* Fixed the spaces and indentation related issues that houndci found
* Fixed the spaces and indentation related issues that houndci found
* Missed the const file which has the macros defined.
* Fixed the CI build error
* Fixed the CI build error because of unused variable in exception case
* Updating the arlo code based on comment from @balloob. Changed the arm and disarm to enable_motion_detection and disable_motion_detection respectively. Similarly fixed the AttributeError handling. Added dummy code to the demo camera also. Moved out the definitions in const.py into the camera __init__ file
* Fixed the comments posted by houndci-bot
* Fixed the comments posted by houndci-bot
* Fixed the comments posted by houndci-bot
* Fixed the comments posted by travis-ci integration bot
* Fixed the comments posted by travis-ci integration bot
* Fixed the comments posted by travis-ci integration bot for demo.py: expected 2 lines, found 1
* Updated code in camera __init__.py to use the get function instead of directly calling the member in the structure.
* Updated code in camera __init__.py
* Posting the updated code for PR based on @balloob's suggestions/recommendations
* Removed the arlo reference from demo code. Copy-paste error
* Removed the unused import found by hound bot
* Expected 2 lines before function, but found only 1.
* Based on @balloob's comments, moved these constants to the camera/arlo.py
* Added test_demo.py to test the motion enabled and motion disabled in camera component
* Fixing issues found by houndci-bot
* Fixing issues found by houndci-bot
* Fixing the code as per @balloob's suggestions
* Fixing the code as per @balloob's suggestions
* Fixing the test_demo failure. Tried to rewrite a base function to enable the motion in __init__.py and missed to add it to as a job.
* Fixing the hound bot comment
* Update arlo.py
* Update arlo.py
