"""Support for KNX/IP covers."""
from __future__ import annotations

from datetime import datetime
from typing import Any, Callable

from xknx import XKNX
from xknx.devices import Cover as XknxCover, Device as XknxDevice
from xknx.telegram.address import parse_device_group_address

from homeassistant.components.cover import (
    ATTR_POSITION,
    ATTR_TILT_POSITION,
    DEVICE_CLASS_BLIND,
    DEVICE_CLASSES,
    SUPPORT_CLOSE,
    SUPPORT_CLOSE_TILT,
    SUPPORT_OPEN,
    SUPPORT_OPEN_TILT,
    SUPPORT_SET_POSITION,
    SUPPORT_SET_TILT_POSITION,
    SUPPORT_STOP,
    SUPPORT_STOP_TILT,
    CoverEntity,
)
from homeassistant.const import CONF_DEVICE_CLASS, CONF_NAME
from homeassistant.core import HomeAssistant, callback
from homeassistant.helpers import entity_registry as er
from homeassistant.helpers.entity_platform import AddEntitiesCallback
from homeassistant.helpers.event import async_track_utc_time_change
from homeassistant.helpers.typing import ConfigType, DiscoveryInfoType

from .const import DOMAIN
from .knx_entity import KnxEntity
from .schema import CoverSchema


async def async_setup_platform(
    hass: HomeAssistant,
    config: ConfigType,
    async_add_entities: AddEntitiesCallback,
    discovery_info: DiscoveryInfoType | None = None,
) -> None:
    """Set up cover(s) for KNX platform."""
    if not discovery_info or not discovery_info["platform_config"]:
        return
    platform_config = discovery_info["platform_config"]
    _async_migrate_unique_id(hass, platform_config)

    xknx: XKNX = hass.data[DOMAIN].xknx

    entities = []
    for entity_config in platform_config:
        entities.append(KNXCover(xknx, entity_config))

    async_add_entities(entities)


@callback
def _async_migrate_unique_id(
    hass: HomeAssistant, platform_config: list[ConfigType]
) -> None:
    """Change unique_ids used in 2021.4 to include position_target GA."""
    entity_registry = er.async_get(hass)
    for entity_config in platform_config:
        # normalize group address strings - ga_updown was the old uid but is optional
        updown_addresses = entity_config.get(CoverSchema.CONF_MOVE_LONG_ADDRESS)
        if updown_addresses is None:
            continue
        ga_updown = parse_device_group_address(updown_addresses[0])
        old_uid = str(ga_updown)

        entity_id = entity_registry.async_get_entity_id("cover", DOMAIN, old_uid)
        if entity_id is None:
            continue
        position_target_addresses = entity_config.get(CoverSchema.CONF_POSITION_ADDRESS)
        ga_position_target = (
            parse_device_group_address(position_target_addresses[0])
            if position_target_addresses is not None
            else None
        )
        new_uid = f"{ga_updown}_{ga_position_target}"
        entity_registry.async_update_entity(entity_id, new_unique_id=new_uid)


class KNXCover(KnxEntity, CoverEntity):
    """Representation of a KNX cover."""

    def __init__(self, xknx: XKNX, config: ConfigType) -> None:
        """Initialize the cover."""
        self._device: XknxCover
        super().__init__(
            device=XknxCover(
                xknx,
                name=config[CONF_NAME],
                group_address_long=config.get(CoverSchema.CONF_MOVE_LONG_ADDRESS),
                group_address_short=config.get(CoverSchema.CONF_MOVE_SHORT_ADDRESS),
                group_address_stop=config.get(CoverSchema.CONF_STOP_ADDRESS),
                group_address_position_state=config.get(
                    CoverSchema.CONF_POSITION_STATE_ADDRESS
                ),
                group_address_angle=config.get(CoverSchema.CONF_ANGLE_ADDRESS),
                group_address_angle_state=config.get(
                    CoverSchema.CONF_ANGLE_STATE_ADDRESS
                ),
                group_address_position=config.get(CoverSchema.CONF_POSITION_ADDRESS),
                travel_time_down=config[CoverSchema.CONF_TRAVELLING_TIME_DOWN],
                travel_time_up=config[CoverSchema.CONF_TRAVELLING_TIME_UP],
                invert_position=config[CoverSchema.CONF_INVERT_POSITION],
                invert_angle=config[CoverSchema.CONF_INVERT_ANGLE],
            )
        )
        self._device_class: str | None = config.get(CONF_DEVICE_CLASS)
        self._unique_id = (
            f"{self._device.updown.group_address}_"
            f"{self._device.position_target.group_address}"
        )
        self._unsubscribe_auto_updater: Callable[[], None] | None = None

    @callback
    async def after_update_callback(self, device: XknxDevice) -> None:
        """Call after device was updated."""
        self.async_write_ha_state()
        if self._device.is_traveling():
            self.start_auto_updater()

    @property
    def device_class(self) -> str | None:
        """Return the class of this device, from component DEVICE_CLASSES."""
        if self._device_class in DEVICE_CLASSES:
            return self._device_class
        if self._device.supports_angle:
            return DEVICE_CLASS_BLIND
        return None

    @property
    def supported_features(self) -> int:
        """Flag supported features."""
        supported_features = SUPPORT_OPEN | SUPPORT_CLOSE | SUPPORT_SET_POSITION
        if self._device.supports_stop:
            supported_features |= SUPPORT_STOP
        if self._device.supports_angle:
            supported_features |= (
                SUPPORT_SET_TILT_POSITION
                | SUPPORT_OPEN_TILT
                | SUPPORT_CLOSE_TILT
                | SUPPORT_STOP_TILT
            )
        return supported_features

    @property
    def current_cover_position(self) -> int | None:
        """Return the current position of the cover.

        None is unknown, 0 is closed, 100 is fully open.
        """
        # In KNX 0 is open, 100 is closed.
        pos = self._device.current_position()
        return 100 - pos if pos is not None else None

    @property
    def is_closed(self) -> bool | None:
        """Return if the cover is closed."""
        # state shall be "unknown" when xknx travelcalculator is not initialized
        if self._device.current_position() is None:
            return None
        return self._device.is_closed()

    @property
    def is_opening(self) -> bool:
        """Return if the cover is opening or not."""
        return self._device.is_opening()

    @property
    def is_closing(self) -> bool:
        """Return if the cover is closing or not."""
        return self._device.is_closing()

    async def async_close_cover(self, **kwargs: Any) -> None:
        """Close the cover."""
        await self._device.set_down()

    async def async_open_cover(self, **kwargs: Any) -> None:
        """Open the cover."""
        await self._device.set_up()

    async def async_set_cover_position(self, **kwargs: Any) -> None:
        """Move the cover to a specific position."""
        knx_position = 100 - kwargs[ATTR_POSITION]
        await self._device.set_position(knx_position)

    async def async_stop_cover(self, **kwargs: Any) -> None:
        """Stop the cover."""
        await self._device.stop()
        self.stop_auto_updater()

    @property
    def current_cover_tilt_position(self) -> int | None:
        """Return current tilt position of cover."""
        if not self._device.supports_angle:
            return None
        ang = self._device.current_angle()
        return 100 - ang if ang is not None else None

    async def async_set_cover_tilt_position(self, **kwargs: Any) -> None:
        """Move the cover tilt to a specific position."""
        knx_tilt_position = 100 - kwargs[ATTR_TILT_POSITION]
        await self._device.set_angle(knx_tilt_position)

    async def async_open_cover_tilt(self, **kwargs: Any) -> None:
        """Open the cover tilt."""
        await self._device.set_short_up()

    async def async_close_cover_tilt(self, **kwargs: Any) -> None:
        """Close the cover tilt."""
        await self._device.set_short_down()

    async def async_stop_cover_tilt(self, **kwargs: Any) -> None:
        """Stop the cover tilt."""
        await self._device.stop()
        self.stop_auto_updater()

    def start_auto_updater(self) -> None:
        """Start the autoupdater to update Home Assistant while cover is moving."""
        if self._unsubscribe_auto_updater is None:
            self._unsubscribe_auto_updater = async_track_utc_time_change(
                self.hass, self.auto_updater_hook
            )

    def stop_auto_updater(self) -> None:
        """Stop the autoupdater."""
        if self._unsubscribe_auto_updater is not None:
            self._unsubscribe_auto_updater()
            self._unsubscribe_auto_updater = None

    @callback
    def auto_updater_hook(self, now: datetime) -> None:
        """Call for the autoupdater."""
        self.async_write_ha_state()
        if self._device.position_reached():
            self.hass.async_create_task(self._device.auto_stop_if_necessary())
            self.stop_auto_updater()