* Change the API boundary between stream and camera
Shift more of the stream lifecycle management to the camera. The motivation is to support stream urls that expire
giving the camera the ability to change the stream once it is created.
* Document stream lifecycle and simplify stream/camera interaction
* Reorder create_stream function to reduce diffs
* Increase test coverage for camera_sdm.py
* Fix ffmpeg typo.
* Add a stream identifier for each stream, managed by camera
* Remove stream record service
* Update homeassistant/components/stream/__init__.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Unroll changes to Stream interface back into camera component
* Fix preload stream to actually start the background worker
* Reduce unncessary diffs for readability
* Remove redundant camera stream start code
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
Unlikely sqlite and mysql, postgresql throws ProgrammingError instead
of InternalError or OperationalError when trying to create an index
that already exists.
* Remove dependencies on keepalive from StremaOutput and stream_worker
Pull logic from StreamOutput and stream_worker into the Stream
class, unifying keepalive and idle timeout logic. This prepares
for future changes to preserve hls state across stream url changes.
* Enhance MQTT cover platform
Allow combining of position and state of MQTT cover
Add template and fix optimistic in set tilt position
Add tests
* Add abbreviations
* Add tests and stopped state
* Cleanup & fix range for templates
* Apply suggestions from code review
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Add support for limited templates (no HASS access)
* Pass variables to automation triggers
* Support templates in MQTT triggers
* Spelling
* Handle trigger referenced by variables
* Raise on unsupported function in limited templates
* Validate MQTT trigger schema in MQTT device trigger
* Add trigger_variables to automation config schema
* Don't print stacktrace when setting up trigger throws
* Make pylint happy
* Add trigger_variables to variables
* Add debug prints, document limited template
* Add tests
* Validate MQTT trigger topic early when possible
* Improve valid_subscribe_topic_template
* Mark entities as unavailable when they are removed but are still registered
* Add sync_entity_lifecycle to collection helper
* Remove debug print
* Lint
* Fix tests
* Fix tests
* Update zha
* Update zone
* Fix tests
* Update hyperion
* Update rfxtrx
* Fix tests
* Pass force_remove=True from integrations
Co-authored-by: Erik <erik@montnemery.com>
* Simplify configuration structure by removing the controller key
* Fix flake8
* Fix review comments
* Don't use migrate_entry mechanism to flatten configuration
Keep legacy configuration when creating new entries as well
* Convert old groups unique ids
Work around for walrus operator not working properly :/
* Remove CONF_GROUP_ID_BASE once entities unique id are updated
* Don't use migrate_entry mechanism to update unique_ids of groups
* Remove walrus operator :(
* Fix review comments
* Walrusify assignment to old_unique_id
* Fix backwards compatiblity with fans update to new model
There were some non-speeds and devices that report a none
speed. These problems were discovered when updating zha
tasmota and vesync to the new model in #45407
* Update coverage
* fix check
* Removed pylint disable on unused after updating CI files that were out of date.
* Pylint still fails due to bug on DOMAIN import. Added disable check.
* Addressed PR comments
* Added import for ClientError to test_config_flow.py
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
* Do not require admin account for foscam cameras.
Foscam cameras require admin account for getting the MAC address,
requiring an admin account in the integration is not desirable as
an operator one is good enough (and a good practice).
Old entries using the MAC address as unique_id are migrated to the
new unique_id format so everything is consistent.
Also fixed unhandled invalid responses from the camera in the
config flow process.
* Make RTSP port configurable again as some cameras reports wrong port
* Remove periods from new log lines
* Set new Config Flow version to 2 and adjust the entity migration
* Create a proper error message for the InvalidResponse exception
* Change crafted unique_id to use entry_id in the entity
* Abort if same host and port is already configured
* Fix entry tracking to use entry_id instead of unique_id
* Remove unique_id from mocked config entry in tests
* MySensors: Add type annotations
Adds a bunch of type annotations that were created
while understanding the code.
* MySensors: Change GatewayId to string
In preparation for config flow.
The GatewayId used to be id(gateway).
With config flows, every gateway will have its own
ConfigEntry. Every ConfigEntry has a unique id.
Thus we would have two separate but one-to-one related ID systems.
This commit removes this unneeded duplication by using the id of the ConfigEntry
as GatewayId.
* MySensors: Add unique_id to all entities
This allows entities to work well with the frontend.
* MySensors: Add device_info to all entities
Entities belonging to the same node_id will now by grouped as a device.
* MySensors: clean up device.py a bit
* MySensors: Add config flow support
With this change the MySensors can be fully configured from the GUI.
Legacy configuration.yaml configs will be migrated by reading them once.
Note that custom node names are not migrated. Users will have to re-enter
the names in the front-end.
Since there is no straight-forward way to configure global settings,
all previously global settings are now per-gateway. These settings include:
- MQTT retain
- optimistic
- persistence enable
- MySensors version
When a MySensors integration is loaded, it works as follows:
1. __init__.async_setup_entry is called
2. for every platform, async_forward_entry_setup is called
3. the platform's async_setup_entry is called
4. __init__.setup_mysensors_platform is called
5. the entity's constructor (e.g. MySensorsCover) is called
6. the created entity is stored in a dict in the hass object
* MySensors: Fix linter errors
* MySensors: Remove unused import
* MySensors: Feedback from @MartinHjelmare
* MySensors: Multi-step config flow
* MySensors: More feedback
* MySensors: Move all storage in hass object under DOMAIN
The integration now stores everything under hass.data["mysensors"]
instead of using several top level keys.
* MySensors: await shutdown of gateway instead of creating a task
* MySensors: Rename Ethernet to TCP
* MySensors: Absolute imports and cosmetic changes
* MySensors: fix gw_stop
* MySensors: Allow user to specify persistence file
* MySensors: Nicer log message
* MySensors: Add lots of unit tests
* MySensors: Fix legacy import of persistence file name
Turns out tests help to find bugs :D
* MySensors: Improve test coverage
* MySensors: Use json persistence files by default
* MySensors: Code style improvements
* MySensors: Stop adding attributes to existing objects
This commit removes the extra attributes that were being
added to the gateway objects from pymysensors.
Most attributes were easy to remove, except for the gateway id.
The MySensorsDevice class needs the gateway id as it is part of its DevId
as well as the unique_id and device_info.
Most MySensorsDevices actually end up being Entities.
Entities have access to their ConfigEntry via self.platform.config_entry.
However, the device_tracker platform does not become an Entity.
For this reason, the gateway id is not fetched from self.plaform but
given as an argument.
Additionally, MySensorsDevices expose the address of the gateway
(CONF_DEVICE). Entities can easily fetch this information via self.platform,
but the device_tracker cannot. This commit chooses to remove the gateway
address from device_tracker. While this could in theory break some automations,
the simplicity of this solution was deemed worth it.
The alternative of adding the entire ConfigEntry as an argument to MySensorsDevices
is not viable, because device_tracker is initialized by the async_setup_scanner function
that isn't supplied a ConfigEntry. It only gets discovery_info.
Adding the entire ConfigEntry doesn't seem appropriate for this edge case.
* MySensors: Fix gw_stop and the translations
* MySensors: Fix incorrect function calls
* MySensors: Fewer comments in const.py
* MySensors: Remove union from _get_gateway and remove id from try_connect
* MySensors: Deprecate nodes option in configuration.yaml
* MySensors: Use version parser from packaging
* MySensors: Remove prefix from unique_id and change some private property names
* MySensors: Change _get_gateway function signature
* MySensors: add packaging==20.8 for the version parser
* MySensors: Rename some stuff
* MySensors: use pytest.mark.parametrize
* MySensors: Clean up test cases
* MySensors: Remove unneeded parameter from devices
* Revert "MySensors: add packaging==20.8 for the version parser"
This reverts commit 6b200ee01a.
* MySensors: Use core interface for testing configuration.yaml import
* MySensors: Fix test_init
* MySensors: Rename a few variables
* MySensors: cosmetic changes
* MySensors: Update strings.json
* MySensors: Still more feedback from @MartinHjelmare
* MySensors: Remove unused strings
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* MySensors: Fix typo and remove another unused string
* MySensors: More strings.json
* MySensors: Fix gateway ready handler
* MySensors: Add duplicate detection to config flows
* MySensors: Deal with non-existing topics and ports.
Includes unit tests for these cases.
* MySensors: Use awesomeversion instead of packaging
* Add string already_configured
* MySensors: Abort config flow when config is found to be invalid while importing
* MySensors: Copy all error messages to also be abort messages
All error strings may now also be used as an abort reason,
so the strings should be defined
* Use string references
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Fix issue with control of cover when the target value is Up/Down instead of Open/Close
* Adjust open/close/stop cover control to account for no Open/Up or Close/Down targets
* Revert back to using values of 0/99 to close/open a cover since it is supported by all covers
* Replace RELEASE_BUTTON with False and remove unused PRESS_BUTTON in zwave_js cover
* Fix homekit options not being prefilled
When changing homekit options, the existing ones
were not being prefilled on the form.
* hide camera screen if no cameras
