* Add support for off_delay to MQTT binary_sensor
* Fix debounce, add testcase
* Make off_delay number of seconds instead of timedelta
* Update mqtt.py
* Fix testcase, remove CONF_OFF_DELAY from const.py
* Enable BMW component to be unit system aware
* lint fixes
* use constants for config entries
* remove configuration from component and rely only on HA config of unit_system
* remove unused import
* update code to reflect feedback
* lint fixes
* remove unnecessary comments
* rework return statement to satisfy pylint
* more lint fixes
* add tests for volume utils
* lint fixes
* more lint fixes
* remove unnecessary comments
* Made it possible to define multiple octoprint printers
* style fix
* Added configuration option for octoprint port
* SSL support in octoprint platform configuration
* Octoprint component now auto loads sensor and binary_sensor platforms
* preliminary support for auto discovery of octoprint servers
* Moved sensors and binary sensors configuration into main octoprint configuration
* Using base_url as the key for storing api in the octoprint component
* made sure to not supersede the platforms' domains
* bugfix: continue setting up other printers if one fails
* flake8 style correction
* Added icons to sensors
* Fail platform setup if no printers were successfully added
* Simplified custom validator
* Add additional model name of the Xiaomi Aqara Button (WXKG11LM)
* Add additional model name of the Xiaomi Aqara Wireless Switch (WXKG02LM, WXKG03LM)
* Bump PyXiaomiGateway version
* Using new methods for blink camera
- Refactored blink platform (breaking change)
- Camera needs to be uniquely enabled in config from now on
- Added motion detection enable/disable to camera platform
* Fix motion detection
- bumped blinkpy to 0.8.1
- Added wifi strength sensor
* Added platform schema to sensor
- Added global variables for brand and attribution to main platform
* Removed blink binary sensor
* Add alarm control panel
* Fixed dependency, added alarm_home
* Update requirements
* Fix lint errors
* Updated throttle times
* Add trigger_camera service (replaced snap_picture)
* Add refresh after camera trigger
* Update blinkpy version
* Wait for valid camera response before returning image
- Motion detection now working!
* Updated for new blinkpy 0.9.0
* Add refresh control and other fixes for new blinkpy release
* Add save video service
* Pushing to force bot to update
* Changed based on first review
- Pass blink as BLINK_DATA instead of DOMAIN
- Remove alarm_arm_home from alarm_control_panel
- Re-add discovery with schema for sensors/binar_sensors
- Change motion_detected to a binary_sensor
- Added camera_armed binary sensor
- Update camera device_state_attributes rather than state_attributes
* Moved blink.py to own folder. Added service hints.
* Updated coveragerc to reflect previous change
* Register services with DOMAIN
- Change device add for loop order in binary_sensor
* Fix lint error
* services.async_register -> services.register
Add `unique_id` to all rachio entities
Add platform discovery to rachio component
Move config options from switch.rachio platform to the rachio component
* Use pyspcwebgw library.
* Support alarm triggering.
* Update requirements.
* Add pyspcwebgw to test reqs.
* Also update script.
* Use dispatcher.
* Address review feedback.
* create binary sensor even if initial update fails
* fixed broken test assertion
* fixed broken test assertion
* avoid fetching resource twice - manually in the setup_platform and then through add_devices
* raising PlatformNotReady instead of creating the sensor if the initial rest call fails; throttling the update to avoid fetching the same resource again immediately after setting up sensor
* rolled back throttling of the rest update call; can still avoid updating the binary sensor's rest resoure twice; fixed tests
* typo
* Added support for multiple tag managers. Fixed typo for signal strength.
* Corrected broken merge.
* Fixed flake8/pylint error.
* Improved docstring.
* Allow only_cache parameter in zha.safe_read()
* Use cache_only for binary_sensor.zha initial update.
* Use cache_only for fan.zha initial update.
* Use cache_only for sensor.zha initial update.
* Use cache_only for switch.zha initial update.
* Use cache_only for light.zha initial update.
* Refactor cached only read in zha platform.
* Add zha.configure_reporting() method.
Binds a cluster and configures reporting for the specified attribute.
* git add homeassistant/components/binary_sensor/zha.py
* Refactor sensor.zha to use new 'configure_reporting() method.
* Zha configure reporting - switch (#1)
* use configure_reporting for zha switch
* lint fixes
* Rename variables/classes to properly reflect the content
* Allow device registry to optionally store config entries
* Connections and identifiers are now sets with tupels
* Make config entries mandatory
* Fix duplicate keys in test
* Rename device to device_info
* Entity platform should only create device entries if config_entry_id exists
* Fix Soundtouch tests
* Revert soundtouch to use self.device
* Fix baloobs comments
* Correct type in test
* First draft
* Generate device id
* No obscure registry
* Dont store config_entry_id in device
* Storage
* Small mistake on rebase
* Do storage more like entity registry
* Improve device identification
* Add tests
* Remove deconz device support from PR
* Fix hound comments, voff!
* Fix comments and clean up
* Fix proper indentation
* Fix pydoc issues
* Fix mochad component to not use self.device
* Fix mochad light platform to not use self.device
* Fix TankUtilitySensor to not use self.device
* Fix Soundtouch to not use self.device
* Fix Plex to not use self.device
* Fix Emby to not use self.device
* Fix Heatmiser to not use self.device
* Fix Wemo lights to not use self.device
* Fix Lifx to not use self.device
* Fix Radiotherm to not use self.device
* Fix Juicenet to not use self.device
* Fix Qwikswitch to not use self.device
* Fix Xiaomi miio to not use self.device
* Fix Nest to not use self.device
* Fix Tellduslive to not use self.device
* Fix Knx to not use self.device
* Clean up a small mistake in soundtouch
* Fix comment from Ballob
* Fix bad indentation
* Fix indentatin
* Lint
* Remove unused variable
* Lint
* Implement X10
* Add X10 after add_device_callback
* Ref device by id not hex and add x10OnOffSwitch name
* X10 services and add sensor device
* Correctly reference X10_HOUSECODE_SCHEMA
* Log adding of X10 devices
* Add X10 All Units Off, All Lights On and All Lights Off devices
* Correct ref to X10 states vs devices
* Add X10 All Units Off, All Lights On and All Lights Off devices
* Correct X10 config
* Debug x10 device additions
* Config x10 from bool to housecode char
* Pass PLM to X10 device create
* Remove PLM to call to add_x10_device
* Unconfuse x10 config and method names
* Correct spelling of x10_all_lights_off_housecode
* Bump insteonplm to 0.10.0 to support X10
* Add host to config options
* Add username and password to config for hub connectivity
* Add username and password to config for hub
* Convert port to int if host is defined
* Add KeypadLinc
* Update config schema to require either port or host
* Solidify Hub and PLM configuration to ensure proper settings
* Update hub schema
* Bump insteonplm version
* Fix pylint and flake issues
* Bump insteonplm to 0.12.1
* Merge insteon_plm and insteon_local to insteon
* Rename insteon_plm to insteon
* Bump insteonplm to 0.12.2
* Flake8 cleanup
* Update .coveragerc for insteon_plm, insteon_local and insteon changes
* Add persistent notification
* Fix reference to insteon_plm
* Fix indentation
* Shorten message and fix grammer
* Add comment to remove in release 0.90
* Hound fix
