Erik Eriksson
d7809c5398
Update of volvooncall component ( #18702 )
2018-11-30 19:07:42 +01:00
Daniel Høyer Iversen
46389fb6ca
Update switchmate lib ( #18785 )
2018-11-29 19:13:08 +01:00
Adam Mills
5c3a4e3d10
Restore states through a JSON store instead of recorder ( #17270 )
...
* Restore states through a JSON store
* Accept entity_id directly in restore state helper
* Keep states stored between runs for a limited time
* Remove warning
2018-11-28 13:16:43 +01:00
damarco
052d305243
Add config entry for ZHA ( #18352 )
...
* Add support for zha config entries
* Add support for zha config entries
* Fix node_config retrieval
* Dynamically load discovered entities
* Restore device config support
* Refactor loading of entities
* Remove device registry support
* Send discovery_info directly
* Clean up discovery_info in hass.data
* Update tests
* Clean up rebase
* Simplify config flow
* Address comments
* Fix config path and zigpy check timeout
* Remove device entities when unloading config entry
2018-11-27 21:21:25 +01:00
Fabian Affolter
f387cdec59
Upgrade pysnmp to 4.4.6 ( #18695 )
2018-11-25 17:59:14 +01:00
David F. Mulcahey
67aa76d295
Refactor ZHA ( #18629 )
...
* refactor ZHA
* lint
* review request
* Exclude more zha modules from coverage
2018-11-22 19:00:46 +01:00
mopolus
01ee03a9a1
Add support for multiple IHC controllers ( #18058 )
...
* Added support for secondary IHC controller
Most IHC systems only have one controller but the system can be setup with a linked secondary controller.
I have updated the code to have it support both primary and secondary controller. Existing configuration is not impacted and secondary controller can be setup the same way, with similar settings nested under 'secondary' in the configuration
* Update __init__.py
* Update __init__.py
* Update __init__.py
* Update ihc.py
* Update ihc.py
* Update ihc.py
* Update __init__.py
* Update ihc.py
* Update ihc.py
* Update ihc.py
* Update __init__.py
* Update ihc.py
* Update ihc.py
* Update __init__.py
* Update ihc.py
* Update __init__.py
* Update const.py
* Update ihc.py
* Update ihc.py
* Update ihc.py
* Update ihc.py
* Update ihc.py
* Update ihc.py
* Update ihc.py
* Update ihc.py
* Update ihc.py
* Update ihc.py
* Update ihc.py
* Update ihc.py
* Update __init__.py
* Update __init__.py
* Update __init__.py
* Update const.py
* Update __init__.py
* Update ihc.py
* Update ihc.py
* Update ihc.py
* Update ihc.py
* Update __init__.py
* Update __init__.py
* Update ihc.py
* Update ihc.py
* Update ihc.py
* Update __init__.py
* Update ihc.py
* Update ihc.py
* Update __init__.py
* Update ihc.py
* Update ihc.py
* Update __init__.py
* Update ihc.py
* Update ihc.py
* Update ihc.py
* Update ihc.py
* Update ihc.py
* Update ihc.py
* Update ihc.py
* Update ihc.py
* Update __init__.py
* Update __init__.py
* Update ihc.py
* Update __init__.py
* Update __init__.py
* Update __init__.py
* Update __init__.py
* Update __init__.py
* Update __init__.py
indentation was incorrect for "load_platform" in "get_manual_configuration". Load_platform was not called with the correct component name
2018-11-22 09:45:40 +01:00
pbalogh77
3b53003795
Fibaro components ( #18487 )
...
* Added Fibaro omcponents
Added cover, light, sensor and switch components
* Improvements based on code review
Improvements based on code review
* Fixes based on code review
Fixes based on code review
* Changes to light behavior based on code review
Changes to light behavior based on code review
* Internal changes
Changed how brightness is represented internally.
It should have no impact on functionality.
2018-11-21 06:15:54 +01:00
Aaron Bach
e73b9b9b8f
Clean up left-behind dispatcher handlers when removing RainMachine ( #18488 )
...
* Clean up left-behind dispatcher handlers when removing RainMachine
* Member comments
2018-11-17 10:42:50 +01:00
Aaron Bach
8aa1283adc
Add Rainmachine config entry ( #18419 )
...
* Initial stuff
* More work in place
* Starting with tests
* Device registry in place
* Hound
* Linting
* Member comments (including extracting device registry)
* Member comments (plus I forgot cleanup!)
* Hound
* More Hound
* Removed old import
* Adding config entry test to coverage
* Updated strings
2018-11-14 13:23:49 -07:00
Daniel Høyer Iversen
14ad5c0006
Switchmate library update ( #18336 )
2018-11-09 23:41:44 +01:00
Jeff Wilson
5bab0018f5
Make flux switch async ( #18277 )
...
* Make flux switch async
* Fix line lengths
* Fix indentation
* Set tracker before await to avoid race condition
* Fix lint errors
2018-11-07 21:52:55 +01:00
majuss
ec732c896d
Add support for Lupusec alarm control panel ( #17691 )
...
* Adds support for Lupusec alarm control panel
* fixed various mostly cosmetic issues
* fixed generic type of binary sensors
* fixed some formatting; removed scan interval completely -> defaults now to 2 secs
* removed unused data caches; added check if binary sensor class exists
* cosmetics
* generic type fix
* small fix
* small fixes
* guard clause added
* small fixes
2018-11-07 12:51:12 +01:00
Sebastian Muszynski
df3d82e0e3
Use async_add_executor_job at the xiaomi_miio platforms ( #18294 )
2018-11-07 09:03:35 +01:00
Filip Bednárik
24efda20bf
Add additional property to HomeKitSwitch to show whether the Homekit outlet is in use ( #17448 )
...
* Add additional property to HomeKitSwitch to show whether the Homekit outlet is in use or not
* Fix issues from review - Remove unused property, simplify and rename the device_state_attributes method
2018-11-06 12:43:47 +01:00
Robert Svensson
dcdae325ea
deCONZ - reflect hub status on entities ( #18106 )
...
* Support for controlling entity available attribute based on gateways availability
* Fix string not being in imperative mood
2018-11-05 16:21:44 +01:00
Robert Svensson
92c536ec0e
Don't create a switch for POE device if said device is Cloud key ( #18117 )
2018-11-02 21:09:16 +01:00
Anders Melchiorsen
93689d68f7
Fix time zone for flux switch ( #18102 )
2018-11-02 12:32:41 +01:00
Andy Castille
e9ae862fca
Update to DoorBirdPy v2 (again) ( #14933 )
...
* Update to DoorBirdPy v2
* Move get_schedule_entry to DoorBirdPy, general cleanup
* Update requirements_all.txt
* Requested changes.
* Update requirements post merge.
* Correct call to async_add_executor_job
* Update clear schedule endpoint to be async
* Refactor view and device favorite reset
* Register listeners so events show in GUI
* Add token based authorization
* Update requirements
* Linting issues
* Linting issues
* Linting issues
* Correct logging and inheritance
2018-11-01 21:23:06 +01:00
Sebastian Muszynski
c75c00d568
Bump python-miio version ( #18095 )
2018-11-01 17:53:48 +01:00
Robert Svensson
a9140dc8f5
deCONZ - retry if setup fails ( #17772 )
...
* Make component retry if setup fails
* Improve overall test coverage
2018-10-31 22:38:04 +01:00
Ville Skyttä
9c840f93f0
Use const.SUN_EVENT_* more ( #18039 )
2018-10-31 09:10:28 +01:00
Fabian Affolter
434c848104
Minor changes ( #17812 )
2018-10-26 15:45:57 +02:00
Fabian Affolter
54d463e746
Update name ( fixes #17752 ) ( #17756 )
2018-10-24 18:59:52 +02:00
Daniel Høyer Iversen
ef93d48d50
available to switchmate ( #17640 )
2018-10-21 13:41:27 +02:00
emontnemery
9982867d66
Very minor cleanup of RFLink components ( #17649 )
2018-10-21 13:05:02 +02:00
Anders Melchiorsen
cc4d29d42a
Fix flux switch update interval ( #17458 )
2018-10-18 23:04:22 +02:00
Nikolay Vasilchuk
6239a523cc
Fix: Xiaomi Plug state is set twice ( #17482 )
...
* Xiaomi Plug UI fix #17422
* Review
2018-10-18 20:28:43 +02:00
Daniel Høyer Iversen
aa176312a5
Update switchmate library ( #17519 )
2018-10-16 20:08:34 +02:00
Charles Garwood
9c52a3ce22
Z-Wave Device Registry Support ( #17291 )
...
* Add device_registry support for sensor and switch domains
* Add device_registry support for light
* Add device registry to binary_sensor, climate, cover
* Add device registry to zwave fan
* Fix test for config entry loading
* lint
* revert erroneous modification
* Revert device_registry.py change
2018-10-16 14:58:25 +02:00
Robert Svensson
a795093705
UniFi POE control ( #17011 )
...
* First commit
* Feature complete?
* Add dependency
* Move setting poe mode logic to library
* Use guard clauses
* Bump requirement to 2
* Simplify saving switches with poe off
* Store and use poe mode
* Fix indentation
* Fix flake8
* Configuration future proofing
* Bump dependency to v3
* Add first test
* Proper use of defaults with config flow (thanks helto)
* Appease hound
* Make sure there can't be duplicate entries of combination host+site
* More tests
* More tests
* 98% coverage of controller
* Fix hound comments
* Config flow step init not necessary
* Use async_current_entries to check if host and site for controller is used
* Remove storing/restoring poe off devices to slim PR
* First batch of switch tests
* More switch tests.
* Small improvements and clean up
* Make tests pass
Don't name device in device registry
* Dont process clients that belong to non-UniFi POE switches
* Allow selection of site from a list in config flow
* Fix double blank lines in method
* Update codeowners
2018-10-16 10:35:35 +02:00
emontnemery
2ceb4d2d1e
Refactor RFLink component ( #17402 )
...
* Start refactor of RFLink component
* alias _id not added correctly
Aliases for sensor not added correctly
And some debug traces.
* Update rflink.py
* Cleanup, fix review comments
* Call event handlers directly when processing initial event
* Use hass.async_create_task when adding discovered device
* Review comments
* Review comments
2018-10-15 15:35:33 +02:00
Paulus Schoutsen
ac79ff9e24
Add context to scripts run by template entities ( #17329 )
2018-10-15 11:38:49 +02:00
Julius Mittenzwei
a71cc67efb
Fix NoEntitySpecifiedError during knx startup ( #17366 )
...
* Potential fix for #13699
* removed uneccessary initialization of hass
* removed hass from signature
2018-10-15 03:29:36 +02:00
J4nsen
d0da265166
Fix netio component ( #17411 )
...
* bump pynetio to 0.1.9.1 to actually use provided credentials.
* cast to int to fix TypeError
* update requirements_all.txt
2018-10-13 21:09:10 +02:00
Daniel Shokouhi
d3672f36fb
Add unique_id for Neato ( #17369 )
...
* Add unique_id for Neato
* Only send the serial per review comments
2018-10-13 00:33:13 +02:00
Fabian Affolter
8d9da4e7b9
Upgrade construct to 2.9.45 ( #16362 )
2018-10-10 23:52:45 +02:00
Glenn Waters
93e3596e5a
Add Elk-M1 switch and scene platforms ( #17256 )
...
* Add Elk-M1 switch platform.
* Fix travis error.
* Fix very annoying lint error.
* Fix PR comments.
* Fix comment.
* Fix lint errors.
* Fix PR comments.
* Fix PR
Apologize. Going too fast. You should not have to find those.
2018-10-10 19:05:19 +02:00
zhumuht
c434ad6af5
fix_broadlink_sp2_show_energy ( #17271 )
...
* fix_broadlink_sp2_show_energy
Signed-off-by: 朱海涛 <zhumu.zht@alibaba-inc.com>
* fix_broadlink_sp2_show_energy
Signed-off-by: 朱海涛 <zhumu.zht@alibaba-inc.com>
* fix_broadlink_sp2_show_energy
Signed-off-by: 朱海涛 <zhumu.zht@alibaba-inc.com>
* fix_broadlink_sp2_show_energy
Signed-off-by: 朱海涛 <zhumu.zht@alibaba-inc.com>
* fix_broadlink_sp2_show_energy
Signed-off-by: 朱海涛 <zhumu.zht@alibaba-inc.com>
2018-10-10 18:56:00 +02:00
Ville Skyttä
707b7c202d
Narrow scope of various pylint inline disables ( #15364 )
...
* Narrow scope of various pylint inline disables
* Whitespace tweaks
2018-10-10 12:17:11 +02:00
marcolertora
0c34c50d2f
Added lumitek/ankuoo recswitch component ( #15764 )
...
* Added lumitek/ankuoo recswitch component
* cosmetics
* remove callback
* cosmetics
* update requirements pyrecswitch==1.0.2
* add in .coveragerc
2018-10-09 10:13:03 +02:00
Teemu R
56a43436d7
Bump python-miio requirement ( #17260 )
2018-10-08 22:33:06 +02:00
Otto Winter
c41ef65da6
Add device registry to MQTT switches ( #17244 )
2018-10-08 14:57:07 +02:00
Sebastian Muszynski
ff4204244b
Fix data_key and power_consumed attribute of the Aqara Wall Switch ( Closes : #16457 ) ( #17235 )
2018-10-08 10:37:27 +02:00
cdce8p
5d6562a73f
Bugfix switch flux - light service call ( #17187 )
...
* Bugfix switch flux - light service call
* Change x_val and y_val test
2018-10-06 23:30:07 +02:00
cdce8p
07d90c6c55
Fix device_tracker service call & cleanup ( #17173 )
...
* Bugfix group service - device_tracker
* Cleanup
2018-10-05 23:09:55 +02:00
Gerard
aec320dc19
Fix a typo ( #17147 )
2018-10-05 07:48:40 +02:00
cdce8p
7f0a50ce31
async_create_task ( #17059 )
...
* async_create_task
* Update google.py
2018-10-02 11:03:09 +02:00
Sean Wilson
284d4d49c7
Add AquaLogic component ( #16763 )
...
* Add missing ups.status states.
* Add missing DISCHRG state.
* AquaLogic work-in-progress
* - Fix dependencies
- Switch updates
* Add support for aqualogic 0.8 features.
* Remove debugging.
* Switch to async updates rather than using polling.
* Rebase
* Fix lint errors
* Fix lint errors
* Fix lint errors
* Fix lint errors
* Fix lint errors.
* Bump aqualogic version to 0.11
* Update .coveragerc
* Remove integration-specific I/O
* Resolve code review issues.
* Fixed init() call.
2018-10-02 07:32:03 +02:00
Nikolay Vasilchuk
b0c1c37cd5
Fix long update 'load_power' and 'in_use' for Xiaomi Zegbee Plug ( #16915 )
2018-10-01 18:00:48 +02:00
