* First draft for cover component
* Efficiency from @martinhjelmare
* migrate demo
* migrate demo test
* migrate command_line rollershutter
* migrate command_line test
* migrate rpi_gpio garage_door
* make some abstract methods optional
* migrate homematic
* migrate scsgate
* migrate rfxtrx and test
* migrate zwave
* migrate wink
* migrate mqtt rollershutter and test
* requirements
* coverage
* Update mqtt with garage door
* Naming and cleanup
* update test_demo.py
* update demo and core
* Add deprecated warning to rollershutter and garage_door
* Naming again
* Update
* String constants
* Make sure set_position works properly in demo too
* Make sure position is not set if not available.
* Naming, and is_closed
* Update zwave.py
* requirements
* Update test_rfxtrx.py
* fix mqtt
* requirements
* fix wink version
* Fixed demo test
* naming
* Added support for serial HM-Z19 CO2 sensor
* Minor pylint bug fixes
* Added new files to .coveragerc
* Removed newline
* Changes in requirements after change of pmsensor library
* Change the implementation of default name
* Check if serial interface is working before adding the sensor
* Maximum sensor value is 5000ppm
* Added Bluetooth Low Energy device tracker
* Added new file(s)
* Fixed pylint errors
* Remove traling zeros from device names
* recreated deleted file
* Added requirements
* Renamed to bluetooth_le tracker
Removed gattlib from tests
Minor code cleanup
* - fixed .coveragerc bug
- changed discovery algorithm, new devices will only be added if seen 5 times to make sure
HA doesn't blow the database with devices just passing by
* Add a group notify platform which allows sending a single notification to multiple platforms.
* Correctly sort group.py
* Clean up the payload logic
* Make name and entity id required in the schema
* Deep update the dictionary to fix a bug where data wasnt merging.
* Add notify.group tests.
* Improve docstrings.
* Change entities to services and entity_id to service
* Make service a slug without a default value
* Update tests for entities->services, entity_id->service
* vol.Any(cv.slug) -> cv.slug
* Add FritzBox call monitor sensor
* Correct docstrings and suppress too few public methods warning
* Remove blank lines after docstrings
* Add blank lines after class docstrings
* Remove trailing white space
* Make daemon; add reconnect on disconnect
* HP ILO component
* HP ILO component
* Add Onboard Administrator sensor
* Add Onboard Administrator sensor
* Add period to first line
Fix D400 error on line 1
* Add support for GPSD
* Add gpsd.py
* Check if socket is open
* Fix pylint issue
* Rename file to be a sensor
* Update for being a sensor
* Rework for being a sensor
* New component to interface with a pilight-daemon for RF send/receive
* Fix bug that changed the received data, add connected flag, clean up
* New pilight switch component
* New optional whitelist filter to filter uninteressting devices
* Add pilight
* PEP8: too long lines, white spaces
* To keep up the good coverage ...
* PEP 257
* pylint enhancements
* pylint enhancements
* PEP 257
* Better HA config validation and cleanup following code review for #2742
* Fix requirenments to require fixed pilight version
* Change config validation to use voluptuous
* Pilight switch exclude not needed due to wildcard pilight exclude
* Enhance configuration parsing using voluptuous
* Add a Foursquare component which accepts push notifications from Foursquare and provides a user checkin service
* @balloob requested fixes
* Sort .coveragerc list of components by name
* Revert "Sort .coveragerc list of components by name"
This reverts commit 997ae22576.
* Only sort Foursquare since I get conflicts otherwise
* Add Foursquare checkin service to services.yaml
* Initial media_player component for the MPC-HC web API.
* Update .coveragerc to exclude the MPC-HC media player component.
* We don't need a session for every HTTP fetch.
* Use host in configuration YAML to match Kodi component.
* Fix PyLint errors.
* Fix PEP8 errors and use more idiomatic Python to get dict() values.
* Add MPC-HC remote command capabilities for basic control.
* Major rewrite of the KNX multi address device. This class wasn't used before, but the new class will be the base for the LNX thermostat module
* newer KNXIP version needed as the previous version had a serious bug
* Update knxip to later version
* Added thermostat module
* First implementation of a KNX thermostat module
* Minor cleanup
* Removed unsed code
* initial support for Join notifier
add more functions for Join
* rename to joaoapps_join
add message default in schema
move api_key check
* move special join services to their own component
update coveragerc and requirements_all
add icon and smallicon
* Imap unread email sensor
Checks the inbox of a imap account for unread emails. Tested against
gmail.
Example config:
```
sensor:
- platform: imap
name: gmail test
user: USER
password: PASSWORD
server: imap.gmail.com
port: 993
```
* added to .coveragerc
* Code cleanup and typo fix.
* Added port range validation
* Fix lint errors
* Implementation of a KNX platform driver and a KNX switch
* Starting working on a KNX thermostat implementation
* Removed KNX thermostat implementation from this branch again
* Make gateway parameter optional (can be auto-detected in many cases)
* Removed check for double initialisation
* KNX messages now will be handled internally and not send to the Home Assistant message bus
* Call update_ha_state only if should_poll is false
* Removed unused HASS variable
* knxip library version changed
* pylint optimization
* New Switch Platform: TPLink Switch (HS100 / HS110)
### Information
The TPLink switch platform allows you to control the state of your TPLink Wi-Fi Smart Plugs.
Supported devices (tested):
HS100 (UK)
It should also work with the HS110.
To use your D-Link smart plugs in your installation, add the following to your configuration.yaml file:
"""
# Example configuration.yaml entry
switch:
platform: tplink
host: IP_ADRRESS
name: TPLink Switch
"""
### Configuration variables:
host (Required): The IP address of your TPlink plug, eg. http://192.168.1.105
name (Optional): The name to use when displaying this switch.
* Update tplink.py
Bug fixes
* Separate to a standalone library
* Removed unnecessary imports
* Code cleanup and update reference library link
* TPLink switch support (#2453)
* updated requirements
* Switch to SQLAlchemy for the Recorder component. Gives the ability to use MySQL or other.
* fixes for failed lint
* add conversion script
* code review fixes and refactor to use to_native() model methods and execute() helper
* move script to homeassistant.scripts module
* style fixes my tox lint/flake8 missed
* move exclusion up
* Added Sony Bravia support to HA
* Improvements to make it work on my poor raspberry 1
* Just a typo
* A few fixes in order to pass pylint
* - Remove noqa: was due to the 80 characters max per line restriction
- Move communication logic to a separate library at https://github.com/aparraga/braviarc.git
- Added dependency and adapt the code according to that
* A few improvements
* Just a typo in a comment
* Rebase from HM/dev
* Update requirements by executing the script/gen_requirements_all.py
* More isolation level for braviarc lib
* Remove unnecessary StringIO usage
* Revert submodule polymer commit
* Small refactorization and clean up of unused functions
* Executed script/gen_requirements_all.py
* Added a missing condition to ensure that a map is not null
* Fix missing parameter detected by pylint
* A few improvements, also added an empty line to avoid the lint error
* A typo
* Created a new platform for envisalink-based alarm panels (Honeywell/DSC)
* Added a sensor component and cleanup
* Completed initial development.
* Fixing pylint issues.
* Fix more pylint issues
* Fixed more validation issues.
* Final pylint issues
* Final tweaks prior to PR.
* Fixed final pylint issue
* Resolved a few minor issues, and used volumptous for validation.
* Fixing final lint issues
* Fixes to validation schema and refactoring.
add option to name in config
fix const import
use plexapi
add myplex support for remote access
use first server if server not specified
use list comprehension
use dictionary comprehension
* Added Pandora media player utilizing the Pianobar client
* Added Pandora to .coveragerc ignore
* Fixes some docstring formats in Pandora
* More minor formatting tweaks for Pandora
* Eliminated non-portable assumption from Pandora component
* Updated Pandora to properly update currently-playing song.
* Docstring fixes in Pandora
* Added check to ensure Pianobar client is available in path for Pandora.
* Made Pandora client verification a function instead of method.
* Better handling of dependency verification in Pandora.
* WSGI based request handler
with a bit of polishing
Signed-off-by: eagleamon <joseph.piron@gmail.com>
* removed stale comment and fixed version, but failed tests do not seem to be related
* removing the wrapper hack
* added in requirements file
* Found the caved in lint error..