* Backend support for importing waypoints from owntracks as HA zones
* Added test for Owntracks waypoints import
* Backend support for importing waypoints from owntracks as HA zones
* Added test for Owntracks waypoints import
* Removed redundant assignment to CONF_WAYPOINT_IMPORT_USER
* Fixed zone test break and code style issues
* Fixed style issues
* Fixed variable scope issues for entities
* Fixed E302
* Do not install pip packages in tests
* EventBus: return function to unlisten
* Convert automation to entities with services
* Refactored zone creation based on code review feedback, enhanced configuration
* Added unit test to enhance waypoint_whitelist coverage
* Fix JSON encoder issue in recorder
* Fix tests docstring
* * Improved zone naming in waypoint import
* Added more test coverage for owntracks and zone
* Back to 0.28.0.dev0
* Code review feedback from @pavoni
* Added bitfield of features for flux_led since we are supporting effects
* Host should be optional for apcupsd component (#3072)
* Use voluptuous for file (#3049)
* Zwave climate Bugfix: if some setpoints have different units, we should fetch the o… (#3078)
* Bugfix: if some setpoints have different units, we should fetch the one that are active.
* Move order of population for first time detection
* Default to config if None unit_of_measurement
* unit fix (#3083)
* humidity slider (#3088)
* If device was off target temp was null. Default to Heating setpoint (#3091)
* Fix linting
* Upgrade pyuserinput to 0.1.11 (#3068)
* Upgrade pyowm to 2.4.0 (#3067)
* improve isfile validation check (#3101)
* Refactor notification titles to allow for them to be None, this also includes a change in Telegram to only include the title if it's present, and to use a Markdown parse mode for messages (#3100)
* Fix broken test
* rfxtrx sensor clean up
* Bitcoin sensor use warning instead of error (#3103)
* Use voluptuous for HDMI CEC & CONF_DEVICES constants (#3107)
* Update voluptuous for nest (#3109)
* Update configuration check
* Extend platform
* Fix for BLE device tracker (#3019)
* Bug fix tracked devices
* Added scan_duration configuration parameter
* fix homematic climate implementation (#3114)
* Allow 'None' MAC to be loaded from known_devices (#3102)
* Use voluptuous for xmpp (#3127)
* Use voluptuous for twitter (#3126)
* Use voluptuous for Fritzbox and DDWRT (#3122)
* Use Voluptuous for BT Home Hub (#3121)
* Use voluptuous for syslog (#3120)
* Use voluptuous for Aruba (#3119)
* Use constants, update configuration check, and ordering (Pilight) (#3118)
* Use contants, update configuration check, and ordering
* Fix pylint issue
* Migrate to voluptuous (#3113)
* Fix typo (#3108)
* Migrate to voluptuous (#3106)
* Update voluptuous (#3104)
* Climate and cover bugfix (#3097)
* Avoid None comparison for zwave cover.
* Just rely on unit from config for unit_of_measurement
* Explicit return None
* Mqtt (#11)
* Explicit return None
* Missing service and wrong service name defined
* Mqtt state was inverted, and never triggering
* Migrate to voluptuous (#3096)
* Migrate to voluptuous (#3084)
* Fixed Homematic cover (#3116)
* Migrate to voluptuous (#3069)
🐬
* Migrate to voluptuous (#3066)
🐬
* snapcast update (#3012)
* snapcast update
* snapcast update
* validate config
* use conf constants
* orvibo updates (#3006)
🐬
* Update frontend
* move units to temperature for climate zwave. wrong state was sent to mqtt cove
* Use voluptuous for instapush (#3132)
* Use voluptuous for Octoprint (#3111)
* Migrate to voluptuous
* Fix pylint issues
* Add missing docstrings (fix PEP257 issues) (#3098)
* Add missing docstrings (fix PEP257 issues)
* Finish sentence
* Updated braviatv's braviarc version to 0.3.4 (#2997)
* Updated braviarc version to 0.3.4
* Updated braviarc version to requirements_all.txt
* Use voluptuous for Acer projector switch (#3077)
🐬
* Use voluptuous for twilio (#3134)
* Use voluptuous for webostv (#3135)
* Use voluptuous for Command line platforms (#2968)
* Migrate to voluptuous
* Fix pylint issues
* Remove FIXME
* Split setup test
* Test with bootstrap
* Remove lon and lat
* Fix pylint issues
* Add coinmarketcap sensor (#3064)
* Migrate to voluptuous (#3142)
🐬
* Back out insteon hub and fan changes (#3062)
* Move details to docs (#3146)
* Update frontend
* Use constants (#3148)
* Update ordering (#3149)
* Migrate to voluptuous (#3092)
* Display the error instead of the traceback (notify.slack) (#3079)
* Display the error instead of the traceback
* Remove name for check
* Automatic ODB device tracker & device tracker attributes (#3035)
* Migrate to voluptuous (#3173)
* Add voluptuous for tomato and SNMP (#3172)
* Improve voluptuous and login errors for Asus device tracker (#3170)
* Add exclude option to nmap device tracker (#2983)
* Add exclude option to nmap device tracker
Adds an optional exclude paramater to nmap device tracker.
Devices specified in the exclude list will never be scanned
by nmap. This can help to reduce log spam.
ex:
```
device_tracker:
- platform: nmap_tracker
hosts: 10.0.0.1/24
home_interval: 1
interval_seconds: 12
consider_home: 120
track_new_devices: yes
exclude:
- 10.0.0.2
- 10.0.0.1
```
* Handle optional exclude
* Style fixed
* Added Xbox Live component (#3013)
* Added Xbox Live component
* Added Xbox Live sensor to coveralls
* Added init success checks
* Added entity id
* Adding link_names to post.message call (#3167)
If you do not turn link_names on, Slack will not highlight @channel and @username messages.
* Allow https (fixes#3150) (#3155)
* Use constants (#3156)
* Bugfix: ctach Runtime errors (#3153)
"RuntimeError: Disable scan failed" has been seen in a live installation
* Migrate to voluptuous (#3166)
🐬
* Migrate to voluptuous (#3164)
🐬
* Migrate to voluptuous (#3163)
🐬
* Migrate to voluptuous (#3162)
🐬 and 🍪 for fixing quotes!
* Exclude www_static from pydocstyle linting (#3175)
🐬
* Migrate to voluptuous (#3174)
* Migrate to voluptuous (#3171)
* Use voluptuous for mFi switch (#3168)
* Migrate to voluptuous
* Take change configuration into account
* Migrate to voluptuous (#3144)
🐬
* Add the occupancy sensor_class (#3176)
Such a complicated PR
* Update frontend
* Use voluptuous for Unifi, Ubus (#3125)
* Using alert with Hue maintains prior state (#3147)
* When using flash with hue, dont change the on/off state of the light so that it will naturally return to its previous state once flash is complete
* ATTR_FLASH not ATTR_EFFECT
* MQTT fan platform (#3095)
* Add fan.mqtt, allow brightness to be passed and mapped to a fan speed for compatibility with emulated_hue
* Pylint/Flake8 fixes
* Remove brightness
* Add more features, like custom oscillation/speed payloads and setting the speed list
* Flake8 fixes
* flake8/pylint fixes
* Use constants
* block fan.mqtt from coverage
* Fix oscillating comment
* Add Sphinx API doc generation (#3029)
* add's sphinx project to docs/ dir
* include core/helpers autodocs for API reference
* Allow reloading automation without restarting HA (#3002)
* Migrate to voluptuous (#3182)
🐬
* Migrate to voluptuous (#3179)
🐬
* Added scale and offset to the Temper component (#2853)
🐬
* Use voluptuous for BT and Owntracks device trackers (#3187)
🐬
* Correct binary_sensor.ecobee docs URL
* Use voluptuous for Hikvisioncam switch (#3184)
* Migrate to voluptuous
* Use vol.Optional
* Use voluptuous for Edimax (#3178)
🐬
* Use voluptuous for Bravia TV (#3165)
🐬
* Added support to 'effect: random' to Osram Lightify lights (#3192)
* Added support to 'effect: random' to Osram Lightify lights
* removed extra line not required
* Use voluptuous for message_bird, sendgrid (#3136)
* Try out the RTD theme
* Doc updates
* Update voluptuous for existing notify platforms (#3133)
* Update voluptuous for exists notify platforms
* fix constants
* Simple trend sensor. (#3073)
* First cut of trend sensor.
* Tidy.
* Migrate to voluptuous (#3193)
* Migrate to voluptuous (#3194)
🐬
* Migrate to voluptuous (#3197)
* Migrate to voluptuous (#3198)
🐬
* Use extend of PLATFORM_SCHEMA (#3199)
* Migrate to voluptuous (#3202)
🐬
* Updated to use the occupancy sensor_class (#3204)
🐬
* Migrate to voluptuous (#3206)
* Migrate to voluptuous (#3207)
* Migrate to voluptuous (#3208)
🐬
* Migrate to voluptuous (#3209)
🐬
* Migrate to voluptuous (#3214)
* Use voluptuous for SqueezeBox (#3212)
* Migrate to voluptuous
* Remove name
* Migrate to voluptuous and upgrade uber_rides to 0.2.5 (#3181)
* Migrate to voluptuous (#3200)
🐬
* Use Voluptuous for Luci and Netgear device trackers (#3123)
* Use Voluptuous for Luci and NEtgear device trackers
* str_schema shortcut
* Undo str_schema
* change update handling with variable for breack CCU2 (#3215)
* Update ordering (#3216)
* Docs update
* Flake8/pylint
* Add new docs requirements
* Update email validation (#3228)
🐬
* Fix email validation (fixes#3138) (#3227)
* Upgrade slacker to 0.9.25 (#3224)
* Upgrade psutil to 4.3.1 (#3223)
* Upgrade gps3 to 0.33.3 (#3222)
* Upgrade Werkzeug to 0.11.11 (#3220)
* Upgrade sendgrid to 3.4.0 (#3226)
* Bluetooth: keep looking for new devices (#3201)
* keep looking for new devices
* Update bluetooth_tracker.py
* change default value for tracking new devices
* remove commented code
* dlink switch added device state attributes and support for legacy firmware (#3211)
* Use voluptuous for free mobile (#3236)
* Use voluptuous for nma (#3241)
* Improve 1-Wire device family detection and error checking. Use volupt… (#3233)
* Improve 1-Wire device family detection and error checking. Use voluptuous
* Fix detection of gpio connected devices
* Replace rollershutter and garage door with cover, add fan (#3242)
* Use voluptuous for Alarm.com (#3229)
* Use voluptuous for gntp (#3237)
* Use voluptuous for pushbullet, pushetta and pushover (#3240)
* Migrate to voluptuous (#3230)
🐬
* Fix mFi sensors in uninitialized state (#3246)
If mFi sensors are identified but not fully assigned they can
have no tag value, and mficlient throws a ValueError to signal this.
This patch handles that case by considering such devices to always
be STATE_OFF.
* Use voluptuous for PulseAudio Loopback (#3160)
* Migrate to voluptuous
* Fix conf var
* Use voluptuous for Verisure (#3169)
* Migrate to voluptuous
* Update type and add missing config variable
* thread safe modbus (#3188)
* Upgraded fitbit to version 0.2.3 which fixed oauthlib.oauth2.rfc6749.errors.TokenExpiredError: (token_expired) (#3244)
* update ffmpeg version to 0.10 add get image to camera (#3235)
* Migrate to voluptuous (#3234)
* fix bugfix with unique_id (#3217)
* Zwave climate fix and wink cover. (#3205)
* Fixes setpoint get was done outside loop
* zxt_120
* Wink not migrated to cover
* Clarifying debug
* too long line
* Only add 1 device entity
* Owntracks voluptuous fix (#3191)
* Zwave set temperature fix (#3221)
* If device was off set target temp would not work.
* Changed to use a workaround just for Horstmann HRT4-ZW Zwave Thermostat
* Wrong Horseman id
* style changes
* Change PR to suggestion on gitter (#3243)
* Reload groups (#3203)
* Allow reloading groups without restart
* Test to make sure automation listeners are removed.
* Remove unused imports for group tests
* Simplify group config validation
* Add prepare_reload function to entity component
* Migrate group to use entity_component.prepare_reload
* Migrate automation to use entity_component.prepare_reload
* Clean up group.get_entity_ids
* Use cv.boolean for group config validation
* fix remove listener (#3196)
* Add linux battery sensor (#3238)
* protect service data for changes in calls (#3249)
* protect service data for changes in calls
* change handling
* move MappingProxyType to service call
* Fix issue #3250 (#3253)
* Minor Ecobee changes (#3131)
* Update configuration check, ordering, and constants
* Make API key optional
* issue #3250
* Add voluptuous to ecobee (#3257)
* Use constants and update ordering (#3261)
* Add support for complex template structures to data_template (#3255)
* Improve yaml fault tolerance and handle check_config border cases (#3159)
* Use voluptuous for nx584 alarm (#3231)
* Migrate to voluptuous
* Fix pylint issue
* fastdotcom from pypi (#3269)
* Use constants and update ordering (#3268)
🐬
* Use constants and update ordering (#3267)
🐬
* Add additional template for custom date formats (#3262)
I can live with a few visual line breaks 🐬
* Use constants and update ordering (#3266)
* Updated braviatv's braviarc version to 0.3.5 (#3271)
* Use voluptuous for Device Sun Light Trigger (#3105)
* Migrate to voluptuous
* Use default
* Point to master till archive is back (#3285)
* Pi-Hole statistics sensor (#3158)
* Add Pi-Hole sensor
* Update docstrings and remove print()
* Use None for payload
* Added stuff for support range setting (#3189)
* cleanup Homematic code (#3291)
* cleanup old code
* cleanup round 2
* remove unwanted platforms
* Update frontend
* Hotfix for #3100 (#3302)
* Fix TP-Link Archer C7 long passwords (#3225)
* Fix tplink C7 long passwords
Fixes an issue where passwords longer than 15 chars could not log in to Archer C7 routers.
* Truncate in correct place
* Add comment about TP-Link C7 pass truncation
* Fix lint error
* Truncate comment at 79 chars not 80
* modbus write registers service (#3252)
* Fix bloomsky platform discovery (#3303)
* Remove dev tag
Add unit symbol constants
Initial unit system object
Import more constants
Pydoc for unit system file
Import constants for configuration validation
Unit system validation method
Typing for constants
Inches are valid lengths too
Typings
Change base class to dict - needed for remote api call serialization
Validation
Use dictionary keys
Defined unit systems
Update location util to use metric instead of us fahrenheit
Update constant imports
Import defined unit systems
Update configuration to use unit system
Update schema to use unit system
Update constants
Add imports to core for unit system and distance
Type for config
Default unit system
Convert distance from HASS instance
Update temperature conversion to use unit system
Update temperature conversion
Set unit system based on configuration
Set info unit system
Return unit system dictionary with config dictionary
Auto discover unit system
Update location test for use metric
Update forecast unit system
Update mold indicator unit system
Update thermostat unit system
Update thermostat demo test
Unit tests around unit system
Update test common hass configuration
Update configuration unit tests
There should always be a unit system!
Update core unit tests
Constants typing
Linting issues
Remove unused import
Update fitbit sensor to use application unit system
Update google travel time to use application unit system
Update configuration example
Update dht sensor
Update DHT temperature conversion to use the utility function
Update swagger config
Update my sensors metric flag
Update hvac component temperature conversion
HVAC conversion for temperature
Pull unit from sensor type map
Pull unit from sensor type map
Update the temper sensor unit
Update yWeather sensor unit
Update hvac demo unit test
Set unit test config unit system to metric
Use hass unit system length for default in proximity
Use the name of the system instead of temperature
Use constants from const
Unused import
Forecasted temperature
Fix calculation in case furthest distance is greater than 1000000 units
Remove unneeded constants
Set default length to km or miles
Use constants
Linting doesn't like importing just for typing
Fix reference
Test is expecting meters - set config to meters
Use constant
Use constant
PyDoc for unit test
Should be not in
Rename to units
Change unit system to be an object - not a dictionary
Return tuple in conversion
Move convert to temperature util
Temperature conversion is now in unit system
Update imports
Rename to units
Units is now an object
Use temperature util conversion
Unit system is now an object
Validate and convert unit system config
Return the scalar value in template distance
Test is expecting meters
Update unit tests around unit system
Distance util returns tuple
Fix location info test
Set units
Update unit tests
Convert distance
DOH
Pull out the scalar from the vector
Linting
I really hate python linting
Linting again
BLARG
Unit test documentation
Unit test around is metric flag
Break ternary statement into if/else blocks
Don't use dictionary - use members
is metric flag
Rename constants
Use is metric flag
Move constants to CONST file
Move to const file
Raise error if unit is not expected
Typing
No need to return unit since only performing conversion if it can work
Use constants
Line wrapping
Raise error if invalid value
Remove subscripts from conversion as they are no longer returned as tuples
No longer tuples
No longer tuples
Check for numeric type
Fix string format to use correct variable
Typing
Assert errors raised
Remove subscript
Only convert temperature if we know the unit
If no unit of measurement set - default to HASS config
Convert only if we know the unit
Remove subscription
Fix not in clause
Linting fixes
Wants a boolean
Clearer if-block
Check if the key is in the config first
Missed a couple expecting tuples
Backwards compatibility
No like-y ternary!
Error handling around state setting
Pretty unit system configuration validation
More tuple crap
Use is metric flag
Error handling around min/max temp
Explode if no unit
Pull unit from config
Celsius has a decimal
Unused import
Check if it's a temperature before we try to convert it to a temperature
Linting says too many statements - combine lat/long in a fairly reasonable manner
Backwards compatibility unit test
Better doc
* Stick version numbers
* Move elevation to core config
* Migrate forecast test to requests-mock
* Migrate YR tests to requests-mock
* Add requests_mock to requirements_test.txt
* Move conf code from bootstrap to config
* More config fixes
* Fix some more issues
* Add test for set config and failing auto detect
