* Rollback modbus to version 0.107.7
Update manifest to not use async.
Rollback entities to sync version.
Keep newer modifications apart from async.
Rollback __init__ to sync version but keep the new functionality.
add async sub directory
Adding the current (not working) version in a sub directory,
to allow easy sharing with a few alfa testers.
The async version are to be updated to use the serial/tcp already
available instead of the flaky pymodbus version. pymodbus is still
needed to encode/decode the messagess.
Update test cases to reflect sync implementation, but
keep the new functionality like e.g. conftest.py.
* do not publish async version
The async version will be made available in a forked repo, until
it is ready to replace the production code.
* Add device tracker based on arris-tg2492lg
* Return name of device and update version of arris_tg2492lg
* Update CODEOWNERS, requirements_all.txt and .coveragerc
* Change default url to host
* Use f-strings
Co-Authored-By: Franck Nijhof <frenck@frenck.nl>
* Clean up
* Fix formatting
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* add pyserial to manifest
pymodbus is very developer oriented and assumes every developer
adapt the requierements.txt to his/hers needs.
Our requirements.txt is different it contains all posibilities allowing
user to later change configuration without having to install extra
packages.
As a consequence manifest.json needs to include the pyserial.
* modbus: make truly async client creation
Make hass call listen_once async.
Integrate content of start_modbus into async_setup.
Do not use the boiler plate create tcp client function from
pymodbus as it is sync, and also does not work well with asyncio,
instead call the init_<type> directly, since that is async.
* both component/modbus and component/serial uses pyserial-async
but with slighty different version requirements.
Combined the 2.
* Review 1
* Review 2
* Review
@staticmethod is no good, because the function uses class variables.
* Review
Pytest is sometimes a bit cryptic, lets hope this does it.
* Add config_flow for roomba
* Get options to connect
* Fix options in config flow
* Fix syntax in config_flow
* Remove name (not necessary)
* Add bin sensor
* Add Battery sensor
* Add async_connect
* Fix typo
* Add Model and Software version
* Update Roombapy 1.5.0
* Add validate_input
* Add connect and disconnect functions
* Remove test config flow
* Add variables after loop
* Fix translate
* Fix typo
* Fix state of bin
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Remove invalid auth
* Add call function reported_state
* Add options reload
* Fix tracelog
* Set entry_id for config_entry
* Fix DOMAIN unsed-import
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Add unique_id for entry
* Fix device info
* Add config_flow for roomba
* Get options to connect
* Fix options in config flow
* Fix syntax in config_flow
* Remove name (not necessary)
* Add bin sensor
* Add Battery sensor
* Add async_connect
* Fix typo
* Add Model and Software version
* Update Roombapy 1.5.0
* Add validate_input
* Add connect and disconnect functions
* Remove test config flow
* Add variables after loop
* Fix translate
* Fix typo
* Fix state of bin
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Remove invalid auth
* Add call function reported_state
* Add options reload
* Fix tracelog
* Set entry_id for config_entry
* Fix DOMAIN unsed-import
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Add unique_id for entry
* Fix device info
* syntax for mac (pyupgrade)
* Change single key to BLID
* Resolve dict conflict
* Update homeassistant/components/roomba/binary_sensor.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/sensor.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/.translations/en.json
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/strings.json
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Add description
* Revert "Remove test config flow"
This reverts commit 26a89422e8.
* Add tests
* Remove check if user none
* Replace CONF_USERNAME to CONF_BLID (breaking change)
* Update test_config_flow.py
* Add code owners
* Remove CONF_USERNAME (unused)
* Add multiple vacuum
* Add multiple vacuum
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Fix syntax name
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Remove CONF_PREFIX (unused)
* Update homeassistant/components/roomba/sensor.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Add import UNIT_PERCENTAGE
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
Co-authored-by: J. Nick Koston <nick@koston.org>
* Rewrite parts of upnp component
* Linting
* Add SCAN_INTERVAL
* Get values simultaneously
* Move to time related constants, as per #32065
* Linting
* Move constant KIBIBYTE to homeassistant.const
* Simplify code
* Fix tests for #33344
* Changes after review
* Update homeassistant/components/upnp/sensor.py
* Changes after review
* Formatting
* Formatting
* Use ST from discovery info to avoid swapping device_types if device advertises multiple versions
* Linting
* Requirements for upnp + dlna_dmr components
* Linting
* Regen requirements
* Changes after review by @MartinHjelmare
* Changes after review by @MartinHjelmare
* Formatting
* Linting
* Changes after review by @MartinHjelmare
* Changes after review by @MartinHjelmare
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
