* Enable brightness slider for RGB
If we are using RGB with no brightness topic, the brighness slider
should still be visible, as we can scale the RGB amount to give us the
brightness.
* Output RGB scaled by brightness
If we are outputting to an RGB device, but do not have a dedicated
brightness topic set, when the brightness slider is changed, we should
output the current colour's HS, with the V coming from the brightness
slider.
* Brightness from RGB when we're not using a brightness topic
When we aren't using a brightness topic, set the brightness slider based
on the received value from an RGB -> HSV conversion.
* Test for new brightness state scaled by RGB
This adds a test to make sure the brightness stored in the state is
being computed correctly from the RGB value when a dedicated brightness
topic is not set.
* Changes from review
Fixes formatting of supported features flags, and checks HS colour
hasn't been set when operating in RGB-only mode
* Set optimistic brightness correctly in rgb mode
When we're using rgb mode to set the brightness, we want to set
optimistic brightness if:
we are running in optimistic mode
OR
the brightness state topic isn't set and we have a brightness command topic
OR
the rgb state topic isn't set and we don't have a brightness command topic
* Add test for turn_on in RGB brightness mode
* Fix MQTT Light with RGB and Brightness
When an MQTT light is given an RGB and Brightness topic, the RGB
is scaled by the brightness *as well* as the brightness being set
This causes 255,0,0 at 50% brightness to be sent as 127,0,0 at 50%
brightness, which ends up as 63,0,0 after the RGB bulb has applied
its brightness scaling.
Fixes the same issue in mqtt, mqtt-json and mqtt-template.
Related Issue: #13725
* Add comment to mqtt_json as well
* Accept and report both xy and RGB color for lights
* Fix demo light supported_features
* Add new XY color util functions
* Always make color changes available as xy and RGB
* Always expose color as RGB and XY
* Consolidate color supported_features
* Test fixes
* Additional test fix
* Use hue/sat as the hass core color interface
* Tests updates
* Assume MQTT RGB devices need full RGB brightness
* Convert new platforms
* More migration
* Use float for HS API
* Fix backwards conversion for KNX lights
* Adjust limitless min saturation for new scale
* Use different colour channel intensities in tests
Uses a different value for each colour channel in MQTT light tests to
properly differentiate between colour channels.
* Correct ordering of RGB channels in MQTT light
* Added ability to control when the on command is sent.
* Changed to allow only brightness command
* Code cleanup
* Added test cases for on command mode.
* Added addition test
* Changed brightness options to lower case.
* Fixed case of default value
* Remove default
* Add effect support to MQTT Light
* Use effect state topic for supported_features
* Dont use rainbow as default color
* Add color_temp support to MQTT JSON Light
* Add effect to MQTT JSON light
* Support lights in MQTT discovery
* Allow discovered devices to set their platform
* Add white value support to MQTT Light
* Add white value support to MQTT JSON Light
* Remove blank line
* Add color_temp support to MQTT Template light
* Add white value support to MQTT Template Light
* Remove unused SUPPORT_MQTT_TEMPLATE and stale unused flash and transition code from MQTT Template
* Add XY Color to MQTT Light Platform
* Fix syntax
* Fix more syntax errors
* Revert "Remove unused SUPPORT_MQTT_TEMPLATE and stale unused flash and transition code from MQTT Template"
This reverts commit c03798cb63.
* MQTT Template supports flash and transition but doesnt allow templating of the values
* Add XY color support to MQTT JSON
* Proper variable names
* Only allow whitelisted MQTT platforms to be loaded via MQTT Discovery
* Minor tweaks.
Previous code used the state topic which is obviously wrong:
- The state topic is already used to select optimistic mode.
- A light with only the state topic but no command topic would still announce the capability.
commit 220331260e9748ac8e17b3ce776330c1dfb7725b
Merge: 73d93e5c891820
Author: Robbie Trencheny <me@robbiet.us>
Date: Sun Oct 2 17:57:24 2016 -0700
Merge branch 'color_temp_for_mqtt_light' of https://github.com/alterscape/home-assistant into alterscape-color_temp_for_mqtt_light
commit c89182008a
Author: Ryan Spicer <ryanspicer@gmail.com>
Date: Sun Sep 18 23:06:34 2016 -0700
fix missing docstring.
commit e61dda4dd3
Author: Ryan Spicer <ryanspicer@gmail.com>
Date: Sun Sep 18 22:43:04 2016 -0700
fix pep8 errors and typos in tests.
commit 559d1752d2
Author: Ryan Spicer <ryanspicer@gmail.com>
Date: Sun Sep 18 21:41:07 2016 -0700
add tests for mqtt color temp support
commit 702defb932
Author: Ryan Spicer <ryanspicer@gmail.com>
Date: Sun Sep 18 20:55:07 2016 -0700
Add color temp support to mqtt lights.
Converts 0..255 values that HA expects into a device 0..SCALE value
Example:
HA considers "hall light" at 25 brightness or 10% of 255
Device considers "hall light" at 100 brightness or 10% of 1000
This allows our existing MQTT devices to not change their data format to be used in HA
