* Ensure devices with bad cluster subclasses do not prevent startup
* Explicitly unit test an affected SML001 device
* Do not use invalid `hue_occupancy` attribute name
* Actually remove `hue_occupancy`
* Bump ZHA dependencies
* Always use `Light` for lights, including subclasses
* Clean up other platforms
* Add a unit test to ensure all future entity classes have names
* Remove stale `_name`
* Address review feedback and rename `Open` to `Opening`
* rename channel -> cluster handler
* remove refs to channels and create endpoint class
* remove remaining references to channels
* fix filter
* take in latest changes from #91403
* missed one
* missed a reference
* Restore state for ZHA OnOff binary sensors
* Let `Motion` extend `Opening`
`Motion` is just a specified version of `Opening` that only changes the device class for some motion sensors.
Since we have more "special code" in the OnOff/Opening sensor now, we also want to make sure that gets applied to `Motion` binary sensors.
* Improve comment and type
* Add test to verify that binary sensors restore last HA state
* Migrate old ZHA IasZone sensor state to zigpy cache
* Use correct type for ZoneStatus
* Test that migration happens
* Test that migration only happens once
* Fix parametrize
* Construct binary sensor state from zigpy cache (WIP)
* Workaround zha-quirks issue where "MotionWithReset" quirks don't update attribute cache (WIP)
zha-quirks currently has an issue where the ZONE_STATE attribute is updated (when the zone_STATUS changes).
https://github.com/zigpy/zha-device-handlers/pull/2231 is a proper fix for this.
For now, we just update the attribute cache when we get the "zone status update notification" command.
This wasn't noticed before, as the "attribute report signal" was sent from the `cluster_command()` method and the used the provided attribute (in the signal) to update the `_state` value in the binary sensor class.
As we just tell HA to write state again when we get an attribute report now, the ZONE_STATUS attribute is read now (and needs to be correct).
* Use parse() method of main class for IasZone entity (with stripped bits)
* Change wording in comment, remove explicitly sending attr signal
(This comment should be removed/changed later anyway)
* Remove note
* Get zone_status attribute id with zigpy
* Remove `security.` prefix for `IasZone` import
`AceCluster` was already directly imported and `IasZone` is too now for getting the attribute id
* Store full zone status attribute in cache
* Check that non-alarm bits are ignored in IasZone sensor test
* Re-enable occupancy binary sensor test
This test seems to work fine and I don't see any reason why it was commented out for a while
* Fix cached read mix-up for `zone_status`/`zone_state`
This allows cached reads for `zone_state` (enrolled or not), but forces a new read for `zone_status` (alarm or not).
* Add Aqara c1 pet feeder support to ZHA
* clean up
* cleanup
* state classes for daily measurements
* cleanups
* cleanups
* restore the refreshing of the inverted value cache
* cleanup
* Add Particulate Matter 2.5 of ZCL concentration clusters to ZHA component
* Fixed black and flake8 test
* New sensors and manufacturer cluster to support IKEA STARKVIND (with quirk)
* Fix multi_match for FilterLifeTime, device_run_time, filter_run_time sensors for Ikea starkvind
* Remove model match because sensors are matched with manufacturer channel
* Update manufacturerspecific.py
* Update number.py
* Add Particulate Matter 2.5 of ZCL concentration clusters to ZHA component
* Fixed black and flake8 test
* New sensors and manufacturer cluster to support IKEA STARKVIND (with quirk)
* Isort and codespell fixes
* Instead using the fan cluster, i've created a Ikea air purifier cluster/channel that supports all sensors and fan modes
* update sensors to support the new ikea_airpurifier channel
* Fix black, flake8, isort
* Mylint/mypy fixes + Use a TypedDict for REPORT_CONFIG in zha #73629
* Last fix for test_fan.py
* fix fan test
Co-authored-by: David F. Mulcahey <david.mulcahey@me.com>
* Group multi-matches by channels
* Group multi-matched by explicit groups
* Registryless AnalogInput and PowerConfiguration
* Refactor single cluster sensor registry
* Refactor single cluster cover and lock registry
* Refactor single cluster binary_sensor registry
* Pylint
* Cleanup Basic channnel
Remove unused methods.
* Refactor async_configure() method
Split async_configure() into async_configure() and
async_configure_channel_specfici()
* Refactor async_initilize() method
Split into two different methods and configure channel specifics via
async_configure_channel_specific()
* Fixes
* Rename BinarySensorDevice to BinarySensorEntity
* Tweak
* Move deprecation warning to __new__, add test
* Move deprecation warning back to __init__
* Move deprecation warning to __init_subclass
* Split ZHA device loading and entities adding.
Load zha devices from ZHA gateway, but add entities after integration
was setup.
* Use hass.loop.create_task()
* Split ZHA device initialization from loading.
Restore and initialize ZHA devices separately.
* Use hass.async_create_task()
Load devices prior group initialization.
* cleanup timer handle when device is removed
* separate unavailable times for mains vs battery
* better name
* remove light refresh handle when removing light
* remove unused parallel updates
* don't steal HA const for different purpose
* don't flood network every hour for lights
* update test to test both intervals
* add test for light refresh interval
* fix tests
* update test
* put parallel updates back for now...
* fix async_schedule_update_ha_state usage
* review comment
* review comment
* update test - review conversation
* review comments
* await count not call count
* flip some state
* multi attribute reads for lights
* catch specific exceptions
* get attributes
* fix mains powered update
* add guards and use get_attributes
* use debug for read failures
* cleanup
* update return value for read_attributes
* fix on with timed off
* Add ZHA core typing helper.
* Add aux_channels to ZHA rule matching.
* Add match rule claim_channels() method.
* Expose underlying zigpy device.
* Not sure we need this one.
* Move "base" channels.
* Framework for channel discovery.
* Make DEVICE_CLASS and REMOTE_DEVICE_TYPE default dicts.
* Remove attribute reporting configuration registry.
* Refactor channels.
- Refactor zha events
- Use compound IDs and unique_ids
- Refactor signal dispatching on attribute updates
* Use unique id compatible with entities unique ids.
* Refactor ZHA Entity registry.
Let match rule to check for the match.
* Refactor discovery to use new channels.
* Cleanup ZDO channel.
Remove unused zha store call.
* Handle channel configuration and initialization.
* Refactor ZHA Device to use new channels.
* Refactor ZHA Gateway to use new discovery framework.
Use hass.data for entity info intermediate store.
* Don't keep entities in hass.data.
* ZHA gateway new discovery framework.
* Refactor ZHA platform loading.
* Don't update ZHA entities, when restoring from zigpy.
* ZHA entity discover tests.
* Add AnalogInput sensor.
* Remove 0xFC02 based entity from Keen smart vents.
* Clean up IAS channels.
* Refactor entity restoration.
* Fix lumi.router entities name.
* Rename EndpointsChannel to ChannelPool.
* Make Channels.pools a list.
* Fix cover test.
* Fix FakeDevice class.
* Fix device actions.
* Fix channels typing.
* Revert update_before_add=False
* Refactor channel class matching.
* Use a helper function for adding entities.
* Make Pylint happy.
* Rebase cleanup.
* Update coverage for ZHA device type overrides.
* Use cluster_id for single output cluster registry.
* Remove ZHA typing from coverage.
* Fix tests.
* Address comments.
* Address comments.
* Refactor ZHA component tests fixtures.
* Add tests for ZHA device discovery.
* Refactor ZHA registry MatchRule.
Allow callables as a matching criteria.
Allow sets for model & manufacturer.
* Minor ZHA class registry refactoring.
Less cluttered strict_matching registrations.
* Add entities only if there are any.
* Migrate rest of ZHA platforms to ZHA registry.
* Pylint fixes.
* Add SmartThingsAccelCluster to binary_sensor
* Make corrections per discussion with @dmulcahey
* Add missing const to gateway.py
* Remove Acceleration from no sensor
