* WeMo - Various fixes and improvements
Various fixes & improvements to the WeMo components, including:
-- Fixes to rediscovery
-- New reset filter service for the WeMo Humidifier
-- Switched the remainder of the WeMo components to async IO
-- Removed any remaining IO in entity properties and moved them to the polling/subscription update process
* WeMo - Fix pywemo version and remove test code from WeMo fan component
* WeMo Humidifier - Add services.yaml entry for reset filter life service
* WeMo - Update binary_sensor component to use asyncio
* WeMo - Add available property to binary_sensor component
* WeMo - Fixed line length issue
* WeMo - Fix issue with discovering the same device multiple times
* WeMo - Fix for the fix for discovering devices multiple times
* WeMo - Fix long lines
* WeMo - Fixes from code review
* WeMo - Breaking Change - entity_ids is now required on wemo_set_humidity
* WeMo - Code review fixes
* WeMo - Code review fixes
* WeMo - Code review fixes
* Adjusted api for new library version.
* Added support for output monitoring. Added initial status check for the alarm.
* Added default values to the configuration as per review notes.
* Enable alarmdecoder to see open/close state of bypassed zones when armed
The alarmdecoder component already reported RF state bits as attributes. If the user knows which loop is set up for the zone in the alarm panel, they can use that information to tell whether the zone is open or closed even when the system is armed by monitoring the appropriate attribute. That’s awkward, so this commit enables the user to simply configure which loop is used and the component will update the state itself.
* Simplify, also it's more correct to treat it as a state change rather than a
permanent state, since it's possible the decoder might miss some events.
* Remove relative import
* move component to a package
* move TelldusLiveEntry to separate file
* refactor
* move entities from a shared container
* using the dispatch helper instead for communication between component and platforms
* updated covereagerc and codeowners
* suggestions from MartinHjelmare
* don't make update async
* "Strip is good!"
* Fibaro HC connection, initial commit
Very first steps working, connects, fetches devices, represents sensors, binary_sensors and lights towards HA.
* Cover, switch, bugfixes
Initial support for covers
Initial support for switches
Bugfixes
* Some cleanup and improved lights
pylint based cleanup
light switches handled properly
light features reported correctly
* Added status updates and actions
Lights, Blinds, Switches are mostly working now
* Code cleanup, fiblary3 req
Fiblary3 is now in pypi, set it as req
Cleanup based on pylint
* Included in .coveragerc and added how to use guide
Included the fibaro component in coveragerc
Added usage instructions to file header
* PyLint inspired fixes
Fixed pylint warnings
* PyLint inspired fixes
PyLint inspired fixes
* updated to fiblary3 0.1.5
* Minor fixes to finally pass pull req
Fixed fiblary3 to work with python 3.5
Updated fiblary3 to 0.1.6
(added energy and batteryLevel dummies)
* module import and flake8 fixes
Finally (hopefully) figured out what lint is complaining about
* Fixed color support for lights, simplified callback
Fixed color support for lights
Simplified callback for updates
Uses updated fiblary3 for color light handling
* Lean and mean refactor
While waiting for a brave reviewer, I've been making the code smaller and easier to understand.
* Minor fixes to please HoundCI
* Removed unused component
Scenes are not implemented yet
* Nicer comments.
* DEVICE_CLASS, ignore plugins, improved mapping
Added support for device class and icons in sensors and binary_sensors
Improved mapping of sensors and added heuristic matching
Added support for hidden devices
Fixed conversion to float in sensors
* Fixed dimming
Fibaro apparently does not need, nor like the extra turnOn commands for dimmers
* flake8
* Cleanup, Light fixes, switch power
Cleanup of the component to separate init from connect, handle connection error better
Improved light handling, especially for RGBW strips and working around Fibaro quirks
Added energy and power reporting to switches
* Missing comment added
Missing comment added to please flake8
* Removed everything but bin.sensors
Stripdown, hoping for a review
* better aligned comments
OMG
* Fixes based on code review
Fixes based on code review
* Implemented stopping
Implemented stopping of StateHandler thread
Cleanup for clarity
* Minor fix
Removed unnecessary list copying
* Nicer wording on shutdown
* Minor changes based on code review
* minor fixes based on code review
* removed extra line break
* Added Fibaro omcponents
Added cover, light, sensor and switch components
* Improved support for Fibaro UBS
Improved support for Fibaro Universal Binary Sensor, when configured to flood sensor or motion sensor.
* Restore states through a JSON store
* Accept entity_id directly in restore state helper
* Keep states stored between runs for a limited time
* Remove warning
* Recreate component if discovery info is changed
* Update component instead of remove+add
* Set name and unique_id in __init__
* Update unit test
* Cleanup
* More cleanup
* Refactor according to review comments
* Change discovery_hash
* Review comments, add tests
* Fix handling of value_template
* Initial stuff
* More work in place
* Starting with tests
* Device registry in place
* Hound
* Linting
* Member comments (including extracting device registry)
* Member comments (plus I forgot cleanup!)
* Hound
* More Hound
* Removed old import
* Adding config entry test to coverage
* Updated strings
* Fibaro HC connection, initial commit
Very first steps working, connects, fetches devices, represents sensors, binary_sensors and lights towards HA.
* Cover, switch, bugfixes
Initial support for covers
Initial support for switches
Bugfixes
* Some cleanup and improved lights
pylint based cleanup
light switches handled properly
light features reported correctly
* Added status updates and actions
Lights, Blinds, Switches are mostly working now
* Code cleanup, fiblary3 req
Fiblary3 is now in pypi, set it as req
Cleanup based on pylint
* Included in .coveragerc and added how to use guide
Included the fibaro component in coveragerc
Added usage instructions to file header
* PyLint inspired fixes
Fixed pylint warnings
* PyLint inspired fixes
PyLint inspired fixes
* updated to fiblary3 0.1.5
* Minor fixes to finally pass pull req
Fixed fiblary3 to work with python 3.5
Updated fiblary3 to 0.1.6
(added energy and batteryLevel dummies)
* module import and flake8 fixes
Finally (hopefully) figured out what lint is complaining about
* Fixed color support for lights, simplified callback
Fixed color support for lights
Simplified callback for updates
Uses updated fiblary3 for color light handling
* Lean and mean refactor
While waiting for a brave reviewer, I've been making the code smaller and easier to understand.
* Minor fixes to please HoundCI
* Removed unused component
Scenes are not implemented yet
* Nicer comments.
* DEVICE_CLASS, ignore plugins, improved mapping
Added support for device class and icons in sensors and binary_sensors
Improved mapping of sensors and added heuristic matching
Added support for hidden devices
Fixed conversion to float in sensors
* Fixed dimming
Fibaro apparently does not need, nor like the extra turnOn commands for dimmers
* flake8
* Cleanup, Light fixes, switch power
Cleanup of the component to separate init from connect, handle connection error better
Improved light handling, especially for RGBW strips and working around Fibaro quirks
Added energy and power reporting to switches
* Missing comment added
Missing comment added to please flake8
* Removed everything but bin.sensors
Stripdown, hoping for a review
* better aligned comments
OMG
* Fixes based on code review
Fixes based on code review
* Implemented stopping
Implemented stopping of StateHandler thread
Cleanup for clarity
* Minor fix
Removed unnecessary list copying
* Nicer wording on shutdown
* Minor changes based on code review
* minor fixes based on code review
* removed extra line break
* Initial commit of w800rf32 component and binary_sensor.
The W800 family is an X10 RF receiver used with keypads and motion sensors etc.
* Initial commit of w800rf32 switch platform.
The W800 family is an X10 RF receiver used with keypads and motion sensors etc.
* Remove unused code.
* Additions for w800rf32 component and platform code
* Fix w800rf32 minor lint issues and make sure gen_requirements.py correctlly adds w800rf32
* Added dispatch_connect/send and refactor somewhat
* Fix missed indentation lint
* Removed shared entity dict and use async_dispatch code
* Fix long line not caught by lint
* One more line too long, missed it
* Remove unused code and changes for async
* Remove @callback that shouldn't be there.
* Remove switch platform, can't have read only switch.
* Remove unused CONF_DEBUG
* Remove used vars and make CONF_DEVICES required
* Move CONF_OFF_DELAY to platform, only used there
* Adds support for Lupusec alarm control panel
* fixed various mostly cosmetic issues
* fixed generic type of binary sensors
* fixed some formatting; removed scan interval completely -> defaults now to 2 secs
* removed unused data caches; added check if binary sensor class exists
* cosmetics
* generic type fix
* small fix
* small fixes
* guard clause added
* small fixes
* Remove FFmpeg input tests
* Not needed here
* Removing tests for removed functionality
* Minor lint
* Fix tests to reflect removed config option
* Remove async service registration by request
* More lint
* Unused imports
* Make it a non-breaking change
* Update ffmpeg.py
* Added error handling for sense API timeouts
* Moved imports in function
* Moved imports to more appropriate function
* Change exception to custom package version
* Updated sense_energy library to 0.4.2
* Added binary sensors for individual devices
* Whitespace updates
* Split into component, sensors, binary sensors
* Fixed whitespace
* Fixed whitespace
* Moved time constant into sensor file
* Regenerated requirements
* Fixed whitespace
* Updated component dependency
* Fixed whitespace
* Code cleanup
* High and low target temps are also supported if target is supported
* Revert "High and low target temps are also supported if target is supported"
This reverts commit 66b33dc2b8.
* Added all sense components to .coveragerc
* Added check authentication exception
* binary/sensor platforms loaded in setup
* Changed to add all detected devices
* Changed to add all sensors on setup
* Code cleanup
* Whitespace
* Whitespace
* Added sense as requirement for platform
* pylint fixes
* Whitespace
* Switched requirement to dependency
* Made non-class function
* Whitespace
* Removed unneeded checks
* Increased API delay to 60 seconds
* Added guard clause for discovery_info
* Tidy code
* Whitespace
