* Fire events for ISY994 control events
This allows hass to react directly to Insteon button presses (on switches and remotes), including presses, double-presses, and long holds
* Move change event subscription to after entity is added to hass
The event handler method requires `self.hass` to exist, which doesn't have a value until the async_added_to_hass method is called. Should eliminate a race condition.
* Overhaul binary sensors in ISY994 to be functional "out of the box"
We now smash all of the subnodes from the ISY994 in to one Hass binary_sensor, and automatically support both paradigms of state reporting that Insteon sensors can do. Sometimes a single node's state represents the sensor's state, other times two nodes are used and only "ON" events are sent from each. The logic between the two forunately do not conflict so we can support both without knowing which mode the device is in.
This also allows us to handle the heartbeat functionality that certain sensors have - we simply store the timestamp of the heartbeat as an attribute on the sensor device. It defaults to Unknown on bootup if and only if the device supports heartbeats, due to the presence of subnode 4.
* Parse the binary sensor device class from the ISY's device "type"
Now we automatically know which sensors are moisture, motion, and openings! (We also reverse the moisture sensor state, because Insteon reports ON for dry on the primary node.)
* Code review tweaks
The one material change here is that the event subscribers were moved to the `async_added_to_hass` method, as the handlers depend on things that only exist after the entity has been added.
* Handle cases where a sensor's state is unknown
When the ISY first boots up, if a battery-powered sensor has not reported in yet (due to heartbeat or a change in state), the state is unknown until it does.
* Clean up from code review
Fix coroutine await, remove unnecessary exception check, and return None when state is unknown
* Unknown value from PyISY is now -inf rather than -1
* Move heartbeat handling to a separate sensor
Now all heartbeat-compatible sensors will have a separate `binary_sensor` device that represents the battery state (on = dead)
* Add support for Unknown state, which is being added in next PyISY
PyISY will report unknown states as the number "-inf". This is implemented in the base ISY994 component, but subcomponents that override the `state` method needed some extra logic to handle it as well.
* Change a couple try blocks to explicit None checks
* Bump PyISY to 1.1.0, now that it has been published!
* Remove -inf checking from base component
The implementation of the -inf checking was improved in another branch which has been merged in to this branch already.
* Restrict negative-node and heartbeat support to known compatible types
Not all Insteon sensors use the same subnode IDs for the same things, so we need to use different logic depending on device type. Negative node and heartbeat support is now only used for leak sensors and open/close sensors.
* Use new style string formatting
* Add binary sensor detection for pre-5.x firmware
Meant to do this originally; writing documentation revealed that this requirement was missed!
* add ads hub, light and switch
* add binary sensor prototype
* switch: use adsvar for connection
* fix some issues with binary sensor
* fix binary sensor
* fix all platforms
* use latest pyads
* fixed error with multiple binary sensors
* add sensor
* add ads sensor
* clean up after shutdown
* ads component with platforms switch, binary_sensor, light, sensor
add locking
poll sensors at startup
update state of ads switch and light
update ads requirements
remove update() from constructors on ads platforms
omit ads coverage
ads catch read error when polling
* add ads service
* add default settings for use_notify and poll_interval
* fix too long line
* Fix style issues
* no pydocstyle errors
* Send and receive native brightness data to ADS device to prevent issues with math.floor reducing brightness -1 at every switch
* Enable non dimmable lights
* remove setting of self._state in switch
* remove polling
* Revert "remove polling"
This reverts commit 7da420f823.
* add service schema, add links to documentation
* fix naming, cleanup
* re-remove polling
* use async_added_to_hass for setup of callbacks
* fix comment.
* add callbacks for changed values
* use async_add_job for creating device notifications
* set should_poll to False for all platforms
* change should_poll to property
* add service description to services.yaml
* add for brigthness not being None
* put ads component in package
* Remove whitespace
* omit ads package
* Add attribute to show who last un/set alarm.
This allows showing the name of the SPC user who last
issued an arm/disarm command and also allows for
automations to depend on this value.
* Optimize
* Update spc.py
* Update spc.py
* fix
* Fix test.
* Fix for removed is_state_attr.
* Simplified URL expiration calculation and fixed refresh method
* Remove support from Ring from StickupCams or floodlight cameras
* Makes lint happy
* Removed unecessary attributes
* Initial commit of Vultr components
Have a working Vultr hub and binary sensor which pulls down the
following attributes of your VPS:
- Date created
- Subscription id (server id)
- Cost per month (in US$)
- Operating System installed
- IPv4 address
- label (human readable name)
- region
- number of vcpus
- which storage package chosen
- IPV6 address (if applicable)
- RAM amount
Working next on sensor and then testing / coverage.
* Added Vultr sensor for pending charges and current bandwidth. Refactored binary_sensor and hub too
* Corrected is_on bases
* Added basic tests for Vultr binary & platform
* Updated require files
* Changing test fixture to highlight different cases
* Written basic test for sensor.vultr
* Resolved linting errors and broken test
* Increase test coverage and corrected docs
* Resolved hound issues
* Revert back negative binary test
* Another hound resolve
* Refactoring and adding is switch, moving over to vultr branch
* Made Vultr components more resiliant to invalid configs
* Added negetive test for vultr binary sensor
* Added better testing of vultr sensor
* Resolved vultr platform test affecting subsequent vultr tests
* Moving VULTR components to single use design
* Added in sensor name config
* Added missing sensors var
* Resolved init data setting of sensors, added in name conf to switch
* Made the Vultr component more resiliant to startup failure with better alerting
* Various Vultr component changes
- Refactored sensor, binary_sensor, and switch to reference one subscription
- Renamed CURRENT_BANDWIDTH_GB monitored condition to CURRENT_BANDWIDTH_USED
- Improved test coverage
* Resolved local tox linting issue
* Added more testing for Vultr switch
* Improved test coverage for Vultr components
* Made PR comment changes to vultr binary sensor
* Made PR comment changes to Vultr sensor
* resolved PR comments for Vultr Switch
* Resolved vultr sensor name and improved tests
* Improved Vultr switch testing (default name formatting)
* Removed vultr hub failure checking
* Fix: Last Played Media Title in plex would stay even when player was idle/off
Primary Fix is in the "if self._device" portion.
code in "if self._session" is a catch all but i'm not 100% if it is needed.
* Fixed lint issues with previous commit
* 1st Pass at refactoring plex refresh
Moved _media** into clearMedia() which is called in _init_ and
at start of refresh.
Removed redunant _media_* = None entries
Grouped TV Show and Music under single if rather than testing
seperately for now.
* Fixed invalid name for _clearMedia()
Removed another media_* = None entry
* Removed print() statements used for debug
* Removed unneeded "if" statement
* Added Base Support for Linode
* Removed unused Attr
* Corrected some Typos
* updated requirements & coveragerc
* added import to prevent var not declared errors in linter
* Fixed Typo
* Added Switch Component for Linode and corrected some errors if data was blank
* Updated api lib to hopefully remove dependancy on enum34
* Fixed Reference error
* fix pylint errors
* Update linode.py
* Update linode.py
* Update linode.py
* Update linode.py
* Trend sensor now uses linear regression to calculate trend
* Added numpy to trend sensor test requirements
* Added trendline tests
* Trend sensor now has max_samples attribute
* Trend sensor uses utcnow from HA utils
* Trend sensor now completes setup in async_added_to_hass
* Fixed linter issues
* Fixed broken import
* Trend tests make use of max_samples
* Added @asyncio.coroutine decorator to trend update callback
* Update trend.py
* Async rewrite
* Device and events now working with async core
* More async than before
* Methods have moved
* Remove check if parameter serial number is available since library handles reconnection anyway and we can expect user to set up configuration correctly
* Async rewrite
* Device and events now working with async core
* More async than before
* Methods have moved
* Remove check if parameter serial number is available since library handles reconnection anyway and we can expect user to set up configuration correctly
* Serial number is the only unique identifier, checks are still needed
* No async for setup_device
* Bump axis to 13 in preparation of friday the 13th
* Fix review comments
* Removed async after some discussions with @armills.
It wasn't possible to get past that aiohttp doesnt support digest auth, which makes it impossible to convert the full library at this point in time.
* Extended Ring DoorBell to support camera playback and wifi sensors
* Bump python-ringdoorbell to version 0.1.6
* Support to camera playback via ffmpeg
* Extended ringdoorbell sensors to report WiFi attributes
* Extended unittests
* Makes lint happy
* Added support to stickup cameras and fixed logic
* Fixed unittests for stickup cameras
* Makes lint happy
* Refactored attributions and removed extra refresh method.
* Fix missing timeout for Netatmo binary sensor
This fix also merges timeout and offset because there were the same thing
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Fix lint errors
* Fix style
* New Skybell platform with components
* Added skybell components to omit.
* Preemptively fixing lint issues (hopefully).
* Removed unused variable.
* Requested changes.
* Additional CRs
* Hopefully the last of the CR's!
* Added hysteresis attribute to threshold binary sensor
* Added threshold binary sensor hysteresis test case
* Changed threshold binary sensor property name to be more self explanatory
* Pulled default hysteresis value into top level declaration
* Fixed linter errors
* Fixed additional linter errors
* Move comment to docs
* Introducing support to Melnor RainCloud sprinkler systems
* Make monitored_conditions optional for sub-components
* Part 1/2 - Modified attributes, added DATA_ constant and using battery helper
* Part 2/2 - Refactored self-update hub
* Fixed change requested:
- Dispatcher signal connection
- Don't send raincloud object via dispatcher_send()
- Honoring the dynamic scan_interval value on track_time_interval()
* Inherents async_added_to_hass() on all device classes
* Makes lint happy
* * Refactored RainCloud code to incorporate suggestions.
Many thanks to @pvizelli and @martinhjelmare!!
* Removed Entity from RainCloud sensor and fixed docstrings
* Update raincloud.py
* Update raincloud.py
* fix lint
* MQTT Binary Sensor - Add availability_topic for online/offline status
Added topic, configurable payloads, and tests.
* Relocated state subscribe function
Moved state subscribe function to follow the state listener function.
* renamed add_devices to async_add_devices according to hass naming scheme
* replaced some occurencies of async_add_entites to async_add_devices
* fixed unit test
* fixed unit test
* Added satel_integra alarm panel and binary sensor platform
* Fixed several issues after review: import cleanup, reduced messaging levels to debug, other.
* Fixes after review: removed dead code, improved loop, sorted imports.
* Changes after review, not yet working
* Changes after review - wrapped async code, killed ensure_future, moved async_load_platform into jobs
* Updated to latest AbodePy version. Added services and events. Added new device types. Added exclude, light, and polling config options.
* Disable the event service if polling is enabled.
* Addressed all CR's
* Removed duplicated super call.
* Name config option now used. Removed deprecated DEFAULT_NAME.
* Modified partial to move event to first param.
* rename xiaomi to xiaomi_aqara
* rename xiaomi vacuum and xiaomi phillips light to xiaomi miio
* update discovery and tests
* style
* update discovery and tests
* Still use Philips as name
* Allow multiple observations of same entity
Why:
* There may be different probabilities for multiple states of the same
entity.
This change addresses the need by:
* Keeping a list of observations for each entity to check on each state
change of the given entity.
* Adding a numeric id to each observation so that they can be
effectively added and removed from `self.current_obs`.
* Adding a test to confirm functionality.
* fix overzealous indenting
* First draft of XKNX module for Home-Assistant
* XKNX does now take path of xknx.yaml as parameter
* small fix, telegram_received_callback has different signature
* changed method of registering callbacks of devices
* removed non async command lines from xknx
* telegram_received_cb not needed within HASS module
* updated requirements
* Configuration if XKNX should connect via Routing or Tunneling
* bumping version to 0.6.1
* small fix within xknx plugin
* bumped version
* XKNX-Switches are now BinarySensors and Logic from Sensor was moved to BinarySensor
* renamed Outlet to Switch
* pylint
* configuration of KNX lights via HASS config, yay!
* changed name of attribute
* Added configuration for xknx to switch component
* added support for sensors within hass configuration
* added support for climate within hass configuration
* Thermostat -> Climate
* added configuration support for binary_sensors
* renamed Shutter to Cover
* added configuration support for cover
* restructured file structure according to HASS requirements
* pylint
* pylint
* pylint
* pylint
* pylint
* pylint
* updated version
* pylint
* pylint
* pylint
* added setpoint support for climate devices
* devices are now in a different module
* more asyncio :-)
* pydocstyle
* pydocstyle
* added actions to binary_sensor
* allow more than one automation
* readded requirement
* Modifications suggested by hound
* Modifications suggested by hound
* Modifications suggested by hound
* Modifications suggested by hound
* xknx now imported as local import
* hound *sigh*
* lint
* 'fixed' coverage.
* next try for getting gen_requirements_all.py working
* removed blank line
* XKNX 0.7.1 with logging functionality, replaced some print() calls with _LOGGER
* updated requirements_all.txt
* Fixes issue https://github.com/XKNX/xknx/issues/51
* https://github.com/XKNX/xknx/issues/52 added raw access to KNX bus from HASS component.
* bumped version - 0.7.3 contains some bugfixes
* bumped version - 0.7.3 contains some bugfixes
* setting setpoint within climate device has to be async
* bumped version to 0.7.4
* bumped version
* https://github.com/XKNX/xknx/issues/48 Adding HVAC support.
* pylint suggestions
* Made target temperature and set point required attributes
* renamed value_type to type within sensor configuration
* Issue https://github.com/XKNX/xknx/issues/52 : added filter functionality for not flooding the event bus.
* suggestions by pylint
* Added notify support for knx platform.
* logging error if discovery_info is None.
* review suggestions by @armills
* line too long
* Using discovery_info to notifiy component which devices should be added.
* moved XKNX automation to main level.
* renamed xknx component to knx.
* reverted change within .coveragerc
* changed dependency
* updated docstrings.
* updated version of xknx within requirements_all.txt
* moved requirement to correct position
* renamed configuration attribute
* added @callback-decorator and async_prefix.
* added @callback decorator and async_ prefix to register_callbacks functions
* fixed typo
* pylint suggestions
* added angle position and invert_position and invert_angle to cover.knx
* typo
* bumped version within requirements_all.txt
* bumped version
* Added support for HVAC controller status
