* Enable brightness slider for RGB
If we are using RGB with no brightness topic, the brighness slider
should still be visible, as we can scale the RGB amount to give us the
brightness.
* Output RGB scaled by brightness
If we are outputting to an RGB device, but do not have a dedicated
brightness topic set, when the brightness slider is changed, we should
output the current colour's HS, with the V coming from the brightness
slider.
* Brightness from RGB when we're not using a brightness topic
When we aren't using a brightness topic, set the brightness slider based
on the received value from an RGB -> HSV conversion.
* Test for new brightness state scaled by RGB
This adds a test to make sure the brightness stored in the state is
being computed correctly from the RGB value when a dedicated brightness
topic is not set.
* Changes from review
Fixes formatting of supported features flags, and checks HS colour
hasn't been set when operating in RGB-only mode
* Set optimistic brightness correctly in rgb mode
When we're using rgb mode to set the brightness, we want to set
optimistic brightness if:
we are running in optimistic mode
OR
the brightness state topic isn't set and we have a brightness command topic
OR
the rgb state topic isn't set and we don't have a brightness command topic
* Add test for turn_on in RGB brightness mode
* Fix MQTT Light with RGB and Brightness
When an MQTT light is given an RGB and Brightness topic, the RGB
is scaled by the brightness *as well* as the brightness being set
This causes 255,0,0 at 50% brightness to be sent as 127,0,0 at 50%
brightness, which ends up as 63,0,0 after the RGB bulb has applied
its brightness scaling.
Fixes the same issue in mqtt, mqtt-json and mqtt-template.
Related Issue: #13725
* Add comment to mqtt_json as well
* Accept and report both xy and RGB color for lights
* Fix demo light supported_features
* Add new XY color util functions
* Always make color changes available as xy and RGB
* Always expose color as RGB and XY
* Consolidate color supported_features
* Test fixes
* Additional test fix
* Use hue/sat as the hass core color interface
* Tests updates
* Assume MQTT RGB devices need full RGB brightness
* Convert new platforms
* More migration
* Use float for HS API
* Fix backwards conversion for KNX lights
* Adjust limitless min saturation for new scale
* Fix MQTT retained message not being re-dispatched
* Fix tests
* Use paho-mqtt for retained messages
* Improve code style
* Store list of subscribers
* Fix lint error
* Adhere to Home Assistant's logging standard
"Try to avoid brackets and additional quotes around the output to make it easier for users to parse the log."
- https://home-assistant.io/developers/development_guidelines/
* Add reconnect tests
* Fix lint error
* Introduce Subscription
Tests still need to be updated
* Use namedtuple for MQTT messages
... And fix issues
Accessing the config manually at runtime isn't ideal
* Fix MQTT __init__.py tests
* Updated usage of Mocks
* Moved tests that were testing subscriptions out of the MQTTComponent test, because of how mock.patch was used
* Adjusted the remaining tests for the MQTT clients new behavior - e.g. self.progress was removed
* Updated the async_fire_mqtt_message helper
* ✅ Update MQTT tests
* Re-introduce the MQTT subscriptions through the dispatcher for tests - quite ugly though... 🚧
* Update fixtures to use our new MQTT mock 🎨
* 📝 Update base code according to comments
* 🔨 Adjust MQTT test base
* 🔨 Update other MQTT tests
* 🍎 Fix carriage return in source files
Apparently test_mqtt_json.py and test_mqtt_template.py were written on Windows. In order to not mess up the diff, I'll just redo the carriage return.
* 🎨 Remove unused import
* 📝 Remove fire_mqtt_client_message
* 🐛 Fix using python 3.6 method
What's very interesting is that 3.4 didn't fail on travis...
* 🐛 Fix using assert directly
* Use different colour channel intensities in tests
Uses a different value for each colour channel in MQTT light tests to
properly differentiate between colour channels.
* Correct ordering of RGB channels in MQTT light
* Added ability to control when the on command is sent.
* Changed to allow only brightness command
* Code cleanup
* Added test cases for on command mode.
* Added addition test
* Changed brightness options to lower case.
* Fixed case of default value
* Remove default
* Add effect support to MQTT Light
* Use effect state topic for supported_features
* Dont use rainbow as default color
* Add color_temp support to MQTT JSON Light
* Add effect to MQTT JSON light
* Support lights in MQTT discovery
* Allow discovered devices to set their platform
* Add white value support to MQTT Light
* Add white value support to MQTT JSON Light
* Remove blank line
* Add color_temp support to MQTT Template light
* Add white value support to MQTT Template Light
* Remove unused SUPPORT_MQTT_TEMPLATE and stale unused flash and transition code from MQTT Template
* Add XY Color to MQTT Light Platform
* Fix syntax
* Fix more syntax errors
* Revert "Remove unused SUPPORT_MQTT_TEMPLATE and stale unused flash and transition code from MQTT Template"
This reverts commit c03798cb63.
* MQTT Template supports flash and transition but doesnt allow templating of the values
* Add XY color support to MQTT JSON
* Proper variable names
* Only allow whitelisted MQTT platforms to be loaded via MQTT Discovery
* Minor tweaks.
* Migrate mqtt to async
* address paulus comment / convert it complet async
* adress paulus comment / remove future
* Automation triggers should be async
* Fix MQTT async calls
* Show that event helpers are callbacks
* Fix tests
* Lint
commit 220331260e9748ac8e17b3ce776330c1dfb7725b
Merge: 73d93e5c891820
Author: Robbie Trencheny <me@robbiet.us>
Date: Sun Oct 2 17:57:24 2016 -0700
Merge branch 'color_temp_for_mqtt_light' of https://github.com/alterscape/home-assistant into alterscape-color_temp_for_mqtt_light
commit c89182008a
Author: Ryan Spicer <ryanspicer@gmail.com>
Date: Sun Sep 18 23:06:34 2016 -0700
fix missing docstring.
commit e61dda4dd3
Author: Ryan Spicer <ryanspicer@gmail.com>
Date: Sun Sep 18 22:43:04 2016 -0700
fix pep8 errors and typos in tests.
commit 559d1752d2
Author: Ryan Spicer <ryanspicer@gmail.com>
Date: Sun Sep 18 21:41:07 2016 -0700
add tests for mqtt color temp support
commit 702defb932
Author: Ryan Spicer <ryanspicer@gmail.com>
Date: Sun Sep 18 20:55:07 2016 -0700
Add color temp support to mqtt lights.
* Add event loop to the core
* Add block_till_done to HA core object
* Fix some tests
* Linting core
* Fix statemachine tests
* Core test fixes
* fix block_till_done to wait for loop and queue to empty
* fix test_core for passing, and correct start/stop/block_till_done
* Fix remote tests
* Fix tests: block_till_done
* Fix linting
* Fix more tests
* Fix final linting
* Fix remote test
* remove unnecessary import
* reduce sleep to avoid slowing down the tests excessively
* fix remaining tests to wait for non-threadsafe operations
* Add async_ doc strings for event loop / coroutine info
* Fix command line test to block for the right timeout
* Fix py3.4.2 loop var access
* Fix SERVICE_CALL_LIMIT being in effect for other tests
* Fix lint errors
* Fix lint error with proper placement
* Fix slave start to not start a timer
* Add asyncio compatible listeners.
* Increase min Python version to 3.4.2
* Move async backports to util
* Add backported async tests
* Fix linting
* Simplify Python version check
* Fix lint
* Remove unneeded try/except and queue listener appproriately.
* Fix tuple vs. list unorderable error on version compare.
* Fix version tests
Converts 0..255 values that HA expects into a device 0..SCALE value
Example:
HA considers "hall light" at 25 brightness or 10% of 255
Device considers "hall light" at 100 brightness or 10% of 1000
This allows our existing MQTT devices to not change their data format to be used in HA
