* Opt in to install Mosquitto broker add-on in MQTT config flow
* rephrase
* Tests with supervisor and running add-on
* Complete tests for success flows
* Also set up entry in success flow
* Use realistic names for addon and broker
* Finetuning and fail test cases
* Spelling
* Improve translation strings
* Update addon docstr
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Raise AddonError if add-on does not start
* Only show the option to use the add-on
* Simplify flow, rework and cleanup
* Revert unrelated cleanup, process suggestion
* Move ADDON_SLUG const to addon module
* Move fixture to component level
* Move back supervisor fixture
* Move addon_setup_time_fixture and superfixe to config flow model tests
* Refactor hassio fixture
* Rename helpers as they are no fixtures, remove fixture from their names
---------
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Add MQTT device based auto discovery
* Respect override of component options over shared ones
* Add state_topic, command_topic, qos and encoding as shared options
* Add shared option test
* Rename device.py to schemas.py
* Remove unused legacy `platform` attribute to avoid confusion
* Split validation device and origin info
* Require `origin` info on device based discovery
* Log origin info for only once for device discovery
* Fix tests and linters
* ruff
* speed up _replace_all_abbreviations
* Fix imports and merging errors - add slots attr
* Fix unrelated const changes
* More unrelated changes
* join string
* fix merge
* Undo move
* Adjust logger statement
* fix task storm to load platforms
* Revert "fix task storm to load platforms"
This reverts commit 8f12a5f251.
* bail if logging is disabled
* Correct mixup object_id and node_id
* Auto migrate entities to device discovery
* Add device discovery test for device_trigger
* Add migration support for non entity platforms
* Use helper to remove discovery payload
* Fix tests after update branch
* Add discovery migration test
* Refactor
* Repair after rebase
* Fix discovery is broken after migration
* Improve comments
* More comment improvements
* Split long lines
* Add comment to indicate payload dict can be empty
* typo
* Add walrus and update comment
* Add tag to migration test
* Join try blocks
* Refactor
* Cleanup not used attribute
* Refactor
* Move _replace_all_abbreviations out of try block
---------
Co-authored-by: J. Nick Koston <nick@koston.org>
* Add mqtt valve platform
* No stop topic-reports_position and validation
* Do not allow state_open, state_closed with position reporing valve
* Allow open/close feature to be disabled
* Follow up comments
* Rename
* Apply defaults in validator
* Update docstr
* Make MQTT Alarm Control Panel features conditional
The MQTT Alarm Control Panel currently enables all features (arm home,
arm away, arm night, arm vacation, arm custom bypass) unconditionally.
This clutters the interface and can even be potentially dangerous, by
enabling modes that the remote alarm may not support.
Make all the features conditional, by adding a new "supported_features"
configuration option, comprising a list of the supported features as
options. Feature enablement seems inconsistent across the MQTT
component; this implementation is most alike to the Humidifier modes
option, but using a generic "supported_features" name that other
implementations may reuse in the future.
The default value of this new setting remains to be all features, which
while it may be overly expansive, is necessary to maintain backwards
compatibility.
* Apply suggestions from code review
* Use vol.Optional() instead of vol.Required() for "supported_features".
* Move the initialization of _attr_supported_features to _setup_from_config.
Co-authored-by: Jan Bouwhuis <jbouwh@users.noreply.github.com>
* Apply suggestions from emontnemery's code review
* Use vol.In() instead of cv.multi_seelct()
* Remove superfluous _attr_supported_features initializers, already
present in the base class.
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Add invalid config tests for the MQTT Alarm Control Panel
* Set expected_features to None in the invalid MQTT Alarm Control Panel tests
* Add another expected_features=None in the invalid tests
Co-authored-by: Jan Bouwhuis <jbouwh@users.noreply.github.com>
---------
Co-authored-by: Jan Bouwhuis <jbouwh@users.noreply.github.com>
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Add mqtt image platform
* Follow up comments
* Use separate topics
* Set last_ image to `None` on error
* Fix encoding and schema validation
* Assing None to last_image when get image fails
* Follow up comment
* Remove content_type validation
* Add validation
* Rename options according suggestions
* Remove url_topic / template feature from PR
* Always set content_type
* Add Water Heater entity to MQTT
* Adding tests for Water Heater
* Remove duplicate line and unneeded var declaration
* Remove target temp range and away mode
* Move common Temperature Control conf to const
* Remove unnecessary platform schema and temp check
* Add common value template key test
* Use MqttTemperatureControl in Water Heater
* Move operation mode out of MqttTemperatureControl
* Remove unecessary attribute declaration
* Remove default min/max temp and auto init attr
* Fix mqtt water heater initial temp conversion
* Make async_set_temperature common
* Fix init temp comment
* Merge value_template_keys into get_with_templates
* Remove unnecessary operation_mode overriding
* Add async_set_temperature to water heater
* Fix docstring comments
* Make sure MQTT is available starting mqtt_json
* Wait for mqtt client
* Sync client connect
* Simplify
* Addiitional tests async_wait_for_mqtt_client
* Improve comment waiting for mqtt
* Improve docstr
* Do not wait unless the MQTT client is in setup
* Handle entry errors during setup
* More comments - do not clear event
* Add snips and mqtt_room
* Add manual_mqtt
* Update homeassistant/components/mqtt/__init__.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Use a fixture, improve tests
* Simplify
---------
Co-authored-by: J. Nick Koston <nick@koston.org>
* Add Mqtt WebSockets support
* Fix tests
* Add testing websockets options
* Add tests transport settings
* Do not use templates for ws_headers
* Use json helper - small corrections
* Move advanced broker settings to entry
* Add repair issue for deprecated settings
* Split CONFIG_SCHEMA
* Do not store certificate UI flags in entry
* Keep entered password in next dialog
* Do not process yaml config in flow
* Correct typo
* Use dataclass to reference hass.data globals
* Add discovery_registry_hooks to dataclass
* Move discovery registry hooks to dataclass
* Add device triggers to dataclass
* Cleanup DEVICE_TRIGGERS const
* Add last_discovery to data_class
* Simplify typing for class `Subscription`
* Follow up on comment
* Redo suggested typing change to sasisfy mypy
* Restore typing
* Add mypy version to CI check logging
* revert changes to ci.yaml
* Add docstr for protocol
Co-authored-by: Marc Mueller <30130371+cdce8p@users.noreply.github.com>
* Mypy update after merging #78399
* Remove mypy ignore
* Correct return type
Co-authored-by: Marc Mueller <30130371+cdce8p@users.noreply.github.com>
* Cleanup discovery on entity removal
* Add test
* Cleanup and test
* Test with clearing payload not unique id
* Address comments
* Tests cover and typing
* Just pass hass
* reuse code
* Follow up comments revert changes to cover tests
* Add test unique_id has priority over disabled
* Update homeassistant/components/mqtt/__init__.py
Co-authored-by: Erik Montnemery <erik@montnemery.com>
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Wait for unsubscribes
* Spelling comment
* Remove notify_all() during _register_mid()
* Update homeassistant/components/mqtt/client.py
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Correct handling reload manual set up MQTT items
* Save and restore device trigger subscriptions
* Clarify we are storing all remaining subscriptions
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Mqtt Notify service draft
* fix updates
* Remove TARGET config parameter
* do not use protected attributes
* complete tests
* device support for auto discovery
* Add targets attribute and support for data param
* Add tests and resolve naming issues
* CONF_COMMAND_TEMPLATE from .const
* Use mqtt as default service name
* make sure service has a unique name
* pylint error
* fix type error
* Conditional device removal and test
* Improve tests
* update description has_notify_services()
* Use TypedDict for service config
* casting- fix discovery - hass.data
* cleanup
* move MqttNotificationConfig after the schemas
* fix has_notify_services
* do not test log for reg update
* Improve casting types
* Simplify obtaining the device_id
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* await not needed
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Improve casting types and naming
* cleanup_device_registry signature change and black
* remove not needed condition
Co-authored-by: Erik Montnemery <erik@montnemery.com>
