* Cache device triggers on startup
* reorg zha init
* don't reuse gateway
* don't nuke yaml configuration
* review comments
* Add unit tests
* Do not cache device and entity registries
* [WIP] Wrap ZHA data in a dataclass
* [WIP] Get unit tests passing
* Use a helper function for getting the gateway object to fix annotations
* Remove `bridge_id`
* Fix typing issues with entity references in group websocket info
* Use `Platform` instead of `str` for entity platform matching
* Use `get_zha_gateway` in a few more places
* Fix flaky unit test
* Use `slots` for ZHA data
Co-authored-by: J. Nick Koston <nick@koston.org>
---------
Co-authored-by: David F. Mulcahey <david.mulcahey@icloud.com>
Co-authored-by: J. Nick Koston <nick@koston.org>
* Do not connect to the radio hardware within `_connect_zigpy_app`
* Make `connect_zigpy_app` public
* Create radio manager instances from config entries
* Cache device triggers on startup
* reorg zha init
* don't reuse gateway
* don't nuke yaml configuration
* review comments
* Fix existing unit tests
* Ensure `app.shutdown` is called, not just `app.disconnect`
* Revert creating group entities and device registry entries early
* Add unit tests
---------
Co-authored-by: David F. Mulcahey <david.mulcahey@icloud.com>
* Add the SiLabs flasher as a dependency
* Create a repair if the wrong firmware is detected on an EZSP device
* Update homeassistant/components/zha/strings.json
Co-authored-by: c0ffeeca7 <38767475+c0ffeeca7@users.noreply.github.com>
* Provide the ZHA config entry as a reusable fixture
* Create a separate repair when using non-Nabu Casa hardware
* Add unit tests
* Drop extraneous `config_entry.add_to_hass` added in 021def44
* Fully unit test all edge cases
* Move `socket://`-ignoring logic into repair function
* Open a repair from ZHA flows when the wrong firmware is running
* Fix existing unit tests
* Link to the flashing section in the documentation
* Reduce repair severity to `ERROR`
* Make issue persistent
* Add unit tests for new radio probing states
* Add unit tests for new config flow steps
* Handle probing failure raising an exception
* Implement review suggestions
* Address review comments
---------
Co-authored-by: c0ffeeca7 <38767475+c0ffeeca7@users.noreply.github.com>
* Create ZHA entities before attempting to connect to the coordinator
* Delete the ZHA gateway object when unloading the config entry
* Only load ZHA groups if the coordinator device info is known offline
* Do not create a coordinator ZHA device until it is ready
* [WIP] begin fixing unit tests
* [WIP] Fix existing unit tests (one failure left)
* Fix remaining unit test
* Initial implementation of migration back to Zigbee firmware
* Fix typo in `BACKUP_RETRIES` constant name
* Name potentially long-running tasks
* Add an explicit timeout to `_async_wait_until_addon_state`
* Guard against the addon not being installed when uninstalling
* Do not launch the progress flow unless the addon is being installed
* Use a separate translation key for confirmation before disabling multi-PAN
* Disable the bellows UART thread within the ZHA config flow radio manager
* Enhance config flow progress keys for flasher addon installation
* Allow `zha.async_unload_entry` to succeed when ZHA is not loaded
* Do not endlessly spawn task when uninstalling addon synchronously
* Include `uninstall_addon.data.*` in SkyConnect and Yellow translations
* Make `homeassistant_hardware` unit tests pass
* Fix SkyConnect unit test USB mock
* Fix unit tests in related integrations
* Use a separate constant for connection retrying
* Unit test ZHA migration from multi-PAN
* Test ZHA multi-PAN migration helper changes
* Fix flaky SkyConnect unit test being affected by system USB devices
* Unit test the synchronous addon uninstall helper
* Test failure when flasher addon is already running
* Test failure where flasher addon fails to install
* Test ZHA migration failures
* Rename `get_addon_manager` to `get_multiprotocol_addon_manager`
* Remove stray "addon uninstall" comment
* Use better variable names for the two addon managers
* Remove extraneous `self.install_task = None`
* Use the addon manager's `addon_name` instead of constants
* Migrate synchronous addon operations into a new class
* Remove wrapper functions with `finally` clause
* Use a more descriptive error message when the flasher addon is stalled
* Fix existing unit tests
* Remove `wait_until_done`
* Fully replace all addon name constants with those from managers
* Fix OTBR breakage
* Simplify `is_hassio` mocking
* Add missing tests for `check_multi_pan_addon`
* Add missing tests for `multi_pan_addon_using_device`
* Use `waiting` instead of `sync` in class name and methods
* Rename `zha.api` to `zha.websocket_api`
* Implement a ZHA network settings API
* Use the enum name as the radio type
* Don't filter out ignored config entries
* [WIP] Start unit tests
* Add unit tests
* Rename ZHA websocket API module in `.coveragerc`
* Rename `api` to `websocket_api`
* Increase test coverage to 100%
* Clean config flow entries with trailing whitespace
* Rewrite the config entry at runtime, without upgrading
* Skip intermediate `data = config_entry.data` variable
* Perform a deepcopy to ensure the config entry will actually be updated
* Add setup type hints to acmeda
* Add setup type hints to xiaomi_aqara
* Add setup type hints to motion_blinds
* Add setup type hints to xiaomi_miio
* Add setup type hints to diagnostics
* Add setup type hints to zha
* Add setup type hints to firmata
* Add setup type hints to denonavr
* Add setup type hints to rfxtrx
* Add setup type hints to hue
* Cleanup denonavr
* Add return types to xiaomi_miio
* Fix return type
Co-authored-by: epenet <epenet@users.noreply.github.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* initial configuration options
* first crack at saving the data
* constants
* implement initial options
* make more dynamic
* fix unload and reload of the config entry
* update unload
* A platform is not a component
* Fix dynalite
* SUPPORTED_PLATFORMS --> PLATFORMS
* In tests
* In tests 2
* Fix SmartThings
* Fix ZHA test
* Fix Z-Wave
* Revert Z-Wave
* Use PLATFORMS const in ambient_station
* Fix ihc comment
* Unused pylint suppression cleanups
* Remove outdated pylint bug references
* Add flake8-noqa config and note to run it every now and then
* Add codes to noqa's
* Unused noqa cleanups
* Start gateway using new zigpy init.
Update config entry data import.
Use new zigpy startup.
Fix config entry import without zha config section.
Auto form Zigbee network.
* Migrate config entry.
* New ZHA config entry flow.
Use lightweight probe() method for ZHA config entry validation when
available. Failback to old behavior of setting up Zigpy app if radio lib
does not provide probing.
* Clean ZHA_GW_RADIO
* Don't import ZHA device settings.
* Update config flow tests.
* Filter out empty manufacturer.
* Replace port path with an by-id device name.
* Rebase cleanup
* Use correct mock.
* Make lint happy again
* Update tests/components/zha/test_config_flow.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/zha/test_config_flow.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/zha/test_config_flow.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Use executor pool for IO
* Address comments.
Use AsyncMock from tests.
* Use core interface to test config flow.
* Use core interface to test config_flow.
* Address comments. Use core interface.
* Update ZHA dependencies.
* Schema guard
* Use async_update_entry for migration.
* Don't allow schema extra keys.
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
