Spelling fixes (#11940)

CODEOWNERS

@@ -41,7 +41,7 @@ homeassistant/components/*/zwave.py @home-assistant/z-wave
 
 homeassistant/components/hassio.py @home-assistant/hassio
 
-# Indiviudal components
+# Individual components
 homeassistant/components/alarm_control_panel/egardia.py @jeroenterheerdt
 homeassistant/components/camera/yi.py @bachya
 homeassistant/components/climate/ephember.py @ttroy50

homeassistant/components/__init__.py

@@ -133,7 +133,7 @@ def async_setup(hass, config):
             # have been processed. If a service does not exist it causes a 10
             # second delay while we're blocking waiting for a response.
             # But services can be registered on other HA instances that are
-            # listening to the bus too. So as a in between solution, we'll
+            # listening to the bus too. So as an in between solution, we'll
             # block only if the service is defined in the current HA instance.
             blocking = hass.services.has_service(domain, service.service)
 

homeassistant/components/alexa/smart_home.py

@@ -624,7 +624,7 @@ def async_api_set_brightness(hass, config, request, entity):
 @extract_entity
 @asyncio.coroutine
 def async_api_adjust_brightness(hass, config, request, entity):
-    """Process a adjust brightness request."""
+    """Process an adjust brightness request."""
     brightness_delta = int(request[API_PAYLOAD]['brightnessDelta'])
 
     # read current state
@@ -812,7 +812,7 @@ def async_api_set_percentage(hass, config, request, entity):
 @extract_entity
 @asyncio.coroutine
 def async_api_adjust_percentage(hass, config, request, entity):
-    """Process a adjust percentage request."""
+    """Process an adjust percentage request."""
     percentage_delta = int(request[API_PAYLOAD]['percentageDelta'])
     service = None
     data = {ATTR_ENTITY_ID: entity.entity_id}
@@ -873,7 +873,7 @@ def async_api_lock(hass, config, request, entity):
 @extract_entity
 @asyncio.coroutine
 def async_api_unlock(hass, config, request, entity):
-    """Process a unlock request."""
+    """Process an unlock request."""
     yield from hass.services.async_call(entity.domain, SERVICE_UNLOCK, {
         ATTR_ENTITY_ID: entity.entity_id
     }, blocking=False)
@@ -904,7 +904,7 @@ def async_api_set_volume(hass, config, request, entity):
 @extract_entity
 @asyncio.coroutine
 def async_api_adjust_volume(hass, config, request, entity):
-    """Process a adjust volume request."""
+    """Process an adjust volume request."""
     volume_delta = int(request[API_PAYLOAD]['volume'])
 
     current_level = entity.attributes.get(media_player.ATTR_MEDIA_VOLUME_LEVEL)

homeassistant/components/binary_sensor/hive.py

@@ -59,5 +59,5 @@ class HiveBinarySensorEntity(BinarySensorDevice):
                                              self.node_device_type)
 
     def update(self):
-        """Update all Node data frome Hive."""
+        """Update all Node data from Hive."""
         self.session.core.update_data(self.node_id)

homeassistant/components/binary_sensor/insteon_plm.py

@@ -83,5 +83,5 @@ class InsteonPLMBinarySensorDevice(BinarySensorDevice):
     @callback
     def async_binarysensor_update(self, message):
         """Receive notification from transport that new data exists."""
-        _LOGGER.info("Received update calback from PLM for %s", self._address)
+        _LOGGER.info("Received update callback from PLM for %s", self._address)
         self._hass.async_add_job(self.async_update_ha_state())

homeassistant/components/binary_sensor/raincloud.py

@@ -39,7 +39,7 @@ def setup_platform(hass, config, add_devices, discovery_info=None):
                                       sensor_type))
 
         else:
-            # create an sensor for each zone managed by faucet
+            # create a sensor for each zone managed by faucet
             for zone in raincloud.controller.faucet.zones:
                 sensors.append(RainCloudBinarySensor(zone, sensor_type))
 

homeassistant/components/binary_sensor/wemo.py

@@ -62,7 +62,7 @@ class WemoBinarySensor(BinarySensorDevice):
 
     @property
     def name(self):
-        """Return the name of the sevice if any."""
+        """Return the name of the service if any."""
         return self.wemo.name
 
     @property

homeassistant/components/calendar/caldav.py

@@ -174,7 +174,7 @@ class WebDavCalendarData(object):
 
     @staticmethod
     def is_matching(vevent, search):
-        """Return if the event matches the filter critera."""
+        """Return if the event matches the filter criteria."""
         if search is None:
             return True
 

homeassistant/components/calendar/todoist.py

@@ -411,7 +411,7 @@ class TodoistProjectData(object):
 
         The "best" event is determined by the following criteria:
           * A proposed event must not be completed
-          * A proposed event must have a end date (otherwise we go with
+          * A proposed event must have an end date (otherwise we go with
             the event at index 0, selected above)
           * A proposed event must be on the same day or earlier as our
             current event

homeassistant/components/camera/__init__.py

@@ -91,13 +91,13 @@ def async_snapshot(hass, filename, entity_id=None):
 @bind_hass
 @asyncio.coroutine
 def async_get_image(hass, entity_id, timeout=10):
-    """Fetch a image from a camera entity."""
+    """Fetch an image from a camera entity."""
     websession = async_get_clientsession(hass)
     state = hass.states.get(entity_id)
 
     if state is None:
         raise HomeAssistantError(
-            "No entity '{0}' for grab a image".format(entity_id))
+            "No entity '{0}' for grab an image".format(entity_id))
 
     url = "{0}{1}".format(
         hass.config.api.base_url,

homeassistant/components/climate/demo.py

@@ -207,7 +207,7 @@ class DemoClimate(ClimateDevice):
         self.schedule_update_ha_state()
 
     def turn_aux_heat_on(self):
-        """Turn auxillary heater on."""
+        """Turn auxiliary heater on."""
         self._aux = True
         self.schedule_update_ha_state()
 

homeassistant/components/climate/eq3btsmart.py

@@ -55,7 +55,7 @@ def setup_platform(hass, config, add_devices, discovery_info=None):
 
 # pylint: disable=import-error
 class EQ3BTSmartThermostat(ClimateDevice):
-    """Representation of a eQ-3 Bluetooth Smart thermostat."""
+    """Representation of an eQ-3 Bluetooth Smart thermostat."""
 
     def __init__(self, _mac, _name):
         """Initialize the thermostat."""

homeassistant/components/climate/hive.py

@@ -174,5 +174,5 @@ class HiveClimateEntity(ClimateDevice):
             entity.handle_update(self.data_updatesource)
 
     def update(self):
-        """Update all Node data frome Hive."""
+        """Update all Node data from Hive."""
         self.session.core.update_data(self.node_id)

homeassistant/components/climate/mqtt.py

@@ -565,7 +565,7 @@ class MqttClimate(MqttAvailability, ClimateDevice):
 
     @asyncio.coroutine
     def async_turn_aux_heat_on(self):
-        """Turn auxillary heater on."""
+        """Turn auxiliary heater on."""
         if self._topic[CONF_AUX_COMMAND_TOPIC] is not None:
             mqtt.async_publish(self.hass, self._topic[CONF_AUX_COMMAND_TOPIC],
                                self._payload_on, self._qos, self._retain)
@@ -576,7 +576,7 @@ class MqttClimate(MqttAvailability, ClimateDevice):
 
     @asyncio.coroutine
     def async_turn_aux_heat_off(self):
-        """Turn auxillary heater off."""
+        """Turn auxiliary heater off."""
         if self._topic[CONF_AUX_COMMAND_TOPIC] is not None:
             mqtt.async_publish(self.hass, self._topic[CONF_AUX_COMMAND_TOPIC],
                                self._payload_off, self._qos, self._retain)

homeassistant/components/climate/tado.py

@@ -249,7 +249,7 @@ class TadoClimate(ClimateDevice):
         data = self._store.get_data(self._data_id)
 
         if data is None:
-            _LOGGER.debug("Recieved no data for zone %s", self.zone_name)
+            _LOGGER.debug("Received no data for zone %s", self.zone_name)
             return
 
         if 'sensorDataPoints' in data:
@@ -317,7 +317,7 @@ class TadoClimate(ClimateDevice):
                     fan_speed = setting_data['fanSpeed']
 
         if self._device_is_active:
-            # If you set mode manualy to off, there will be an overlay
+            # If you set mode manually to off, there will be an overlay
             # and a termination, but we want to see the mode "OFF"
             self._overlay_mode = termination
             self._current_operation = termination

homeassistant/components/cover/zwave.py

@@ -158,7 +158,7 @@ class ZwaveGarageDoorBarrier(ZwaveGarageDoorBase):
 
     @property
     def is_closing(self):
-        """Return true if cover is in an closing state."""
+        """Return true if cover is in a closing state."""
         return self._state == "Closing"
 
     @property

homeassistant/components/device_tracker/actiontec.py

@@ -42,7 +42,7 @@ Device = namedtuple('Device', ['mac', 'ip', 'last_update'])
 
 
 class ActiontecDeviceScanner(DeviceScanner):
-    """This class queries a an actiontec router for connected devices."""
+    """This class queries an actiontec router for connected devices."""
 
     def __init__(self, config):
         """Initialize the scanner."""

homeassistant/components/emoncms_history.py

@@ -59,7 +59,7 @@ def setup(hass, config):
                     payload, fullurl, req.status_code)
 
     def update_emoncms(time):
-        """Send whitelisted entities states reguarly to Emoncms."""
+        """Send whitelisted entities states regularly to Emoncms."""
         payload_dict = {}
 
         for entity_id in whitelist:

homeassistant/components/fan/xiaomi_miio.py

@@ -200,7 +200,7 @@ class XiaomiAirPurifier(FanEntity):
 
     @asyncio.coroutine
     def _try_command(self, mask_error, func, *args, **kwargs):
-        """Call a air purifier command handling error messages."""
+        """Call an air purifier command handling error messages."""
         from miio import DeviceException
         try:
             result = yield from self.hass.async_add_job(

homeassistant/components/frontend/__init__.py

@@ -407,7 +407,7 @@ def async_setup_themes(hass, themes):
 
     @callback
     def set_theme(call):
-        """Set backend-prefered theme."""
+        """Set backend-preferred theme."""
         data = call.data
         name = data[CONF_NAME]
         if name == DEFAULT_THEME or name in hass.data[DATA_THEMES]:

homeassistant/components/google_assistant/smart_home.py

@@ -79,7 +79,7 @@ class SmartHomeError(Exception):
         """Log error code."""
         super(SmartHomeError, self).__init__(msg)
         _LOGGER.error(
-            "An error has ocurred in Google SmartHome: %s."
+            "An error has occurred in Google SmartHome: %s."
             "Error code: %s", msg, code
         )
         self.code = code
@@ -96,7 +96,7 @@ class Config:
 
 
 def entity_to_device(entity: Entity, config: Config, units: UnitSystem):
-    """Convert a hass entity into an google actions device."""
+    """Convert a hass entity into a google actions device."""
     entity_config = config.entity_config.get(entity.entity_id, {})
     google_domain = entity_config.get(CONF_TYPE)
     class_data = MAPPING_COMPONENT.get(

homeassistant/components/homematic/__init__.py

@@ -466,7 +466,7 @@ def _system_callback_handler(hass, config, src, *args):
                     hass, discovery_type, addresses, interface)
 
                 # When devices of this type are found
-                # they are setup in HASS and an discovery event is fired
+                # they are setup in HASS and a discovery event is fired
                 if found_devices:
                     discovery.load_platform(hass, component_name, DOMAIN, {
                         ATTR_DISCOVER_DEVICES: found_devices

homeassistant/components/homematic/services.yaml

@@ -13,7 +13,7 @@ virtualkey:
       description: Event to send i.e. PRESS_LONG, PRESS_SHORT.
       example: PRESS_LONG
     interface:
-      description: (Optional) for set a interface value.
+      description: (Optional) for set an interface value.
       example: Interfaces name from config
 
 set_variable_value:
@@ -42,7 +42,7 @@ set_device_value:
       description: Event to send i.e. PRESS_LONG, PRESS_SHORT
       example: PRESS_LONG
     interface:
-      description: (Optional) for set a interface value
+      description: (Optional) for set an interface value
       example: Interfaces name from config
     value:
       description: New value

homeassistant/components/image_processing/__init__.py

@@ -60,7 +60,7 @@ SERVICE_SCAN_SCHEMA = vol.Schema({
 
 @bind_hass
 def scan(hass, entity_id=None):
-    """Force process a image."""
+    """Force process an image."""
     data = {ATTR_ENTITY_ID: entity_id} if entity_id else None
     hass.services.call(DOMAIN, SERVICE_SCAN, data)
 

homeassistant/components/light/hive.py

@@ -137,5 +137,5 @@ class HiveDeviceLight(Light):
         return supported_features
 
     def update(self):
-        """Update all Node data frome Hive."""
+        """Update all Node data from Hive."""
         self.session.core.update_data(self.node_id)

homeassistant/components/light/insteon_plm.py

@@ -101,7 +101,7 @@ class InsteonPLMDimmerDevice(Light):
     @callback
     def async_light_update(self, message):
         """Receive notification from transport that new data exists."""
-        _LOGGER.info("Received update calback from PLM for %s", self._address)
+        _LOGGER.info("Received update callback from PLM for %s", self._address)
         self._hass.async_add_job(self.async_update_ha_state())
 
     @asyncio.coroutine

homeassistant/components/light/mochad.py

@@ -62,7 +62,7 @@ class MochadLight(Light):
 
     @property
     def brightness(self):
-        """Return the birghtness of this light between 0..255."""
+        """Return the brightness of this light between 0..255."""
         return self._brightness
 
     def _get_device_status(self):

homeassistant/components/lirc.py

@@ -1,5 +1,5 @@
 """
-LIRC interface to receive signals from a infrared remote control.
+LIRC interface to receive signals from an infrared remote control.
 
 For more details about this component, please refer to the documentation at
 https://home-assistant.io/components/lirc/

homeassistant/components/mailbox/__init__.py

@@ -133,7 +133,7 @@ class MailboxEntity(Entity):
 
 
 class Mailbox(object):
-    """Represent an mailbox device."""
+    """Represent a mailbox device."""
 
     def __init__(self, hass, name):
         """Initialize mailbox object."""

homeassistant/components/media_player/anthemav.py

@@ -49,7 +49,7 @@ def async_setup_platform(hass, config, async_add_devices, discovery_info=None):
 
     def async_anthemav_update_callback(message):
         """Receive notification from transport that new data exists."""
-        _LOGGER.info("Received update calback from AVR: %s", message)
+        _LOGGER.info("Received update callback from AVR: %s", message)
         hass.async_add_job(device.async_update_ha_state())
 
     avr = yield from anthemav.Connection.create(

homeassistant/components/media_player/bluesound.py

@@ -150,10 +150,10 @@ class BluesoundPlayer(MediaPlayerDevice):
             self._port = DEFAULT_PORT
 
     @staticmethod
-    def _try_get_index(string, seach_string):
+    def _try_get_index(string, search_string):
         """Get the index."""
         try:
-            return string.index(seach_string)
+            return string.index(search_string)
         except ValueError:
             return -1
 

homeassistant/components/media_player/cmus.py

@@ -77,7 +77,7 @@ class CmusDevice(MediaPlayerDevice):
         """Get the latest data and update the state."""
         status = self.cmus.get_status_dict()
         if not status:
-            _LOGGER.warning("Recieved no status from cmus")
+            _LOGGER.warning("Received no status from cmus")
         else:
             self.status = status
 

homeassistant/components/media_player/denon.py

@@ -108,7 +108,7 @@ class DenonDevice(MediaPlayerDevice):
             if not line:
                 break
             lines.append(line.decode('ASCII').strip())
-            _LOGGER.debug("Recived: %s", line)
+            _LOGGER.debug("Received: %s", line)
 
         if all_lines:
             return lines

homeassistant/components/media_player/monoprice.py

@@ -103,7 +103,7 @@ def setup_platform(hass, config, add_devices, discovery_info=None):
 
 
 class MonopriceZone(MediaPlayerDevice):
-    """Representation of a a Monoprice amplifier zone."""
+    """Representation of a Monoprice amplifier zone."""
 
     def __init__(self, monoprice, sources, zone_id, zone_name):
         """Initialize new zone."""

homeassistant/components/media_player/squeezebox.py

@@ -473,7 +473,7 @@ class SqueezeBoxDevice(MediaPlayerDevice):
         return self.async_query('playlist', 'play', media_id)
 
     def _add_uri_to_playlist(self, media_id):
-        """Add a items to the existing playlist."""
+        """Add an item to the existing playlist."""
         return self.async_query('playlist', 'add', media_id)
 
     def async_set_shuffle(self, shuffle):

homeassistant/components/microsoft_face.py

@@ -337,7 +337,7 @@ class MicrosoftFace(object):
     @asyncio.coroutine
     def call_api(self, method, function, data=None, binary=False,
                  params=None):
-        """Make a api call."""
+        """Make an api call."""
         headers = {"Ocp-Apim-Subscription-Key": self._api_key}
         url = self._server_url.format(function)
 

homeassistant/components/notify/apns.py

@@ -112,13 +112,13 @@ class ApnsDevice(object):
         self.device_disabled = True
 
     def __eq__(self, other):
-        """Return the comparision."""
+        """Return the comparison."""
         if isinstance(other, self.__class__):
             return self.push_id == other.push_id and self.name == other.name
         return NotImplemented
 
     def __ne__(self, other):
-        """Return the comparision."""
+        """Return the comparison."""
         return not self.__eq__(other)
 
 

homeassistant/components/rflink.py

@@ -390,7 +390,7 @@ class RflinkCommand(RflinkDevice):
         """Cancel queued signal repetition commands.
 
         For example when user changed state while repetitions are still
-        queued for broadcast. Or when a incoming Rflink command (remote
+        queued for broadcast. Or when an incoming Rflink command (remote
         switch) changes the state.
         """
         # cancel any outstanding tasks from the previous state change

homeassistant/components/sensor/bme680.py

@@ -238,7 +238,7 @@ class BME680Handler:
 
         self._gas_sensor_running = True
 
-        # Pause to allow inital data read for device validation.
+        # Pause to allow initial data read for device validation.
         sleep(1)
 
         start_time = time()

homeassistant/components/sensor/dsmr.py

@@ -93,8 +93,8 @@ def async_setup_platform(hass, config, async_add_devices, discovery_info=None):
             device.telegram = telegram
             hass.async_add_job(device.async_update_ha_state())
 
-    # Creates a asyncio.Protocol factory for reading DSMR telegrams from serial
-    # and calls update_entities_telegram to update entities on arrival
+    # Creates an asyncio.Protocol factory for reading DSMR telegrams from
+    # serial and calls update_entities_telegram to update entities on arrival
     if config[CONF_HOST]:
         reader_factory = partial(
             create_tcp_dsmr_reader, config[CONF_HOST], config[CONF_PORT],

homeassistant/components/sensor/eddystone_temperature.py

@@ -122,7 +122,7 @@ class EddystoneTemp(Entity):
 
 
 class Monitor(object):
-    """Continously scan for BLE advertisements."""
+    """Continuously scan for BLE advertisements."""
 
     def __init__(self, hass, devices, bt_device_id):
         """Construct interface object."""
@@ -150,7 +150,7 @@ class Monitor(object):
         self.scanning = False
 
     def start(self):
-        """Continously scan for BLE advertisements."""
+        """Continuously scan for BLE advertisements."""
         if not self.scanning:
             self.scanner.start()
             self.scanning = True

homeassistant/components/sensor/eight_sleep.py

@@ -65,7 +65,7 @@ def async_setup_platform(hass, config, async_add_devices, discovery_info=None):
 
 
 class EightHeatSensor(EightSleepHeatEntity):
-    """Representation of a eight sleep heat-based sensor."""
+    """Representation of an eight sleep heat-based sensor."""
 
     def __init__(self, name, eight, sensor):
         """Initialize the sensor."""
@@ -116,7 +116,7 @@ class EightHeatSensor(EightSleepHeatEntity):
 
 
 class EightUserSensor(EightSleepUserEntity):
-    """Representation of a eight sleep user-based sensor."""
+    """Representation of an eight sleep user-based sensor."""
 
     def __init__(self, name, eight, sensor, units):
         """Initialize the sensor."""
@@ -232,7 +232,7 @@ class EightUserSensor(EightSleepUserEntity):
 
 
 class EightRoomSensor(EightSleepUserEntity):
-    """Representation of a eight sleep room sensor."""
+    """Representation of an eight sleep room sensor."""
 
     def __init__(self, name, eight, sensor, units):
         """Initialize the sensor."""

homeassistant/components/sensor/gearbest.py

@@ -1,5 +1,5 @@
 """
-Parse prices of a item from gearbest.
+Parse prices of an item from gearbest.
 
 For more details about this platform, please refer to the documentation at
 https://home-assistant.io/components/sensor.gearbest/

homeassistant/components/sensor/hive.py

@@ -48,5 +48,5 @@ class HiveSensorEntity(Entity):
         return self.session.sensor.hub_online_status(self.node_id)
 
     def update(self):
-        """Update all Node data frome Hive."""
+        """Update all Node data from Hive."""
         self.session.core.update_data(self.node_id)

homeassistant/components/sensor/raincloud.py

@@ -36,7 +36,7 @@ def setup_platform(hass, config, add_devices, discovery_info=None):
                 RainCloudSensor(raincloud.controller.faucet,
                                 sensor_type))
         else:
-            # create an sensor for each zone managed by a faucet
+            # create a sensor for each zone managed by a faucet
             for zone in raincloud.controller.faucet.zones:
                 sensors.append(RainCloudSensor(zone, sensor_type))
 

homeassistant/components/sensor/tado.py

@@ -147,7 +147,7 @@ class TadoSensor(Entity):
         data = self._store.get_data(self._data_id)
 
         if data is None:
-            _LOGGER.debug("Recieved no data for zone %s", self.zone_name)
+            _LOGGER.debug("Received no data for zone %s", self.zone_name)
             return
 
         unit = TEMP_CELSIUS

homeassistant/components/sensor/waterfurnace.py

@@ -19,7 +19,7 @@ from homeassistant.util import slugify
 class WFSensorConfig(object):
     """Water Furnace Sensor configuration."""
 
-    def __init__(self, friendly_name, field, icon="mdi:guage",
+    def __init__(self, friendly_name, field, icon="mdi:gauge",
                  unit_of_measurement=None):
         """Initialize configuration."""
         self.friendly_name = friendly_name

homeassistant/components/switch/acer_projector.py

@@ -68,7 +68,7 @@ def setup_platform(hass, config, add_devices, discovery_info=None):
 
 
 class AcerSwitch(SwitchDevice):
-    """Represents an Acer Projector as an switch."""
+    """Represents an Acer Projector as a switch."""
 
     def __init__(self, serial_port, name, timeout, write_timeout, **kwargs):
         """Init of the Acer projector."""

homeassistant/components/switch/broadlink.py

@@ -100,7 +100,7 @@ def setup_platform(hass, config, add_devices, discovery_info=None):
             packet = yield from hass.async_add_job(
                 broadlink_device.check_data)
             if packet:
-                log_msg = "Recieved packet is: {}".\
+                log_msg = "Received packet is: {}".\
                           format(b64encode(packet).decode('utf8'))
                 _LOGGER.info(log_msg)
                 hass.components.persistent_notification.async_create(

homeassistant/components/switch/digitalloggers.py

@@ -73,7 +73,7 @@ def setup_platform(hass, config, add_devices, discovery_info=None):
 
 
 class DINRelay(SwitchDevice):
-    """Representation of a individual DIN III relay port."""
+    """Representation of an individual DIN III relay port."""
 
     def __init__(self, controller_name, parent_device, outlet):
         """Initialize the DIN III Relay switch."""

homeassistant/components/switch/flux.py

@@ -210,7 +210,7 @@ class FluxSwitch(SwitchDevice):
             else:
                 temp = self._start_colortemp + temp_offset
         else:
-            # Nightime
+            # Night time
             time_state = 'night'
 
             if now < stop_time:

homeassistant/components/switch/hive.py

@@ -65,5 +65,5 @@ class HiveDevicePlug(SwitchDevice):
             entity.handle_update(self.data_updatesource)
 
     def update(self):
-        """Update all Node data frome Hive."""
+        """Update all Node data from Hive."""
         self.session.core.update_data(self.node_id)

homeassistant/components/switch/insteon_plm.py

@@ -83,7 +83,7 @@ class InsteonPLMSwitchDevice(SwitchDevice):
     @callback
     def async_switch_update(self, message):
         """Receive notification from transport that new data exists."""
-        _LOGGER.info('Received update calback from PLM for %s', self._address)
+        _LOGGER.info('Received update callback from PLM for %s', self._address)
         self._hass.async_add_job(self.async_update_ha_state())
 
     @asyncio.coroutine

homeassistant/components/switch/raincloud.py

@@ -35,7 +35,7 @@ def setup_platform(hass, config, add_devices, discovery_info=None):
 
     sensors = []
     for sensor_type in config.get(CONF_MONITORED_CONDITIONS):
-        # create an sensor for each zone managed by faucet
+        # create a sensor for each zone managed by faucet
         for zone in raincloud.controller.faucet.zones:
             sensors.append(
                 RainCloudSwitch(default_watering_timer,

homeassistant/components/switch/scsgate.py

@@ -155,7 +155,7 @@ class SCSGateSwitch(SwitchDevice):
 class SCSGateScenarioSwitch(object):
     """Provides a SCSGate scenario switch.
 
-    This switch is always in a 'off" state, when toggled it's used to trigger
+    This switch is always in an 'off" state, when toggled it's used to trigger
     events.
     """
 

homeassistant/components/telegram_bot/services.yaml

@@ -25,7 +25,7 @@ send_message:
       description: List of rows of commands, comma-separated, to make a custom keyboard.
       example: '["/command1, /command2", "/command3"]'
     inline_keyboard:
-      description: List of rows of commands, comma-separated, to make a custom inline keyboard with buttons with asociated callback data.
+      description: List of rows of commands, comma-separated, to make a custom inline keyboard with buttons with associated callback data.
       example: '["/button1, /button2", "/button3"] or ["Text button1:/button1, Text button2:/button2", "Text button3:/button3"] or [[["Text button1", "/button1"], ["Text button2", "/button2"]], [["Text button3", "/button3"]]]'
 
 send_photo:
@@ -56,7 +56,7 @@ send_photo:
       description: List of rows of commands, comma-separated, to make a custom keyboard.
       example: '["/command1, /command2", "/command3"]'
     inline_keyboard:
-      description: List of rows of commands, comma-separated, to make a custom inline keyboard with buttons with asociated callback data.
+      description: List of rows of commands, comma-separated, to make a custom inline keyboard with buttons with associated callback data.
       example: '["/button1, /button2", "/button3"] or [[["Text button1", "/button1"], ["Text button2", "/button2"]], [["Text button3", "/button3"]]]'
 
 send_video:
@@ -87,7 +87,7 @@ send_video:
       description: List of rows of commands, comma-separated, to make a custom keyboard.
       example: '["/command1, /command2", "/command3"]'
     inline_keyboard:
-      description: List of rows of commands, comma-separated, to make a custom inline keyboard with buttons with asociated callback data.
+      description: List of rows of commands, comma-separated, to make a custom inline keyboard with buttons with associated callback data.
       example: '["/button1, /button2", "/button3"] or [[["Text button1", "/button1"], ["Text button2", "/button2"]], [["Text button3", "/button3"]]]'
 
 send_document:
@@ -118,7 +118,7 @@ send_document:
       description: List of rows of commands, comma-separated, to make a custom keyboard.
       example: '["/command1, /command2", "/command3"]'
     inline_keyboard:
-      description: List of rows of commands, comma-separated, to make a custom inline keyboard with buttons with asociated callback data.
+      description: List of rows of commands, comma-separated, to make a custom inline keyboard with buttons with associated callback data.
       example: '["/button1, /button2", "/button3"] or [[["Text button1", "/button1"], ["Text button2", "/button2"]], [["Text button3", "/button3"]]]'
 
 send_location:
@@ -140,7 +140,7 @@ send_location:
       description: List of rows of commands, comma-separated, to make a custom keyboard.
       example: '["/command1, /command2", "/command3"]'
     inline_keyboard:
-      description: List of rows of commands, comma-separated, to make a custom inline keyboard with buttons with asociated callback data.
+      description: List of rows of commands, comma-separated, to make a custom inline keyboard with buttons with associated callback data.
       example: '["/button1, /button2", "/button3"] or [[["Text button1", "/button1"], ["Text button2", "/button2"]], [["Text button3", "/button3"]]]'
 
 edit_message:
@@ -165,7 +165,7 @@ edit_message:
       description: Disables link previews for links in the message.
       example: true
     inline_keyboard:
-      description: List of rows of commands, comma-separated, to make a custom inline keyboard with buttons with asociated callback data.
+      description: List of rows of commands, comma-separated, to make a custom inline keyboard with buttons with associated callback data.
       example: '["/button1, /button2", "/button3"] or [[["Text button1", "/button1"], ["Text button2", "/button2"]], [["Text button3", "/button3"]]]'
 
 edit_caption:
@@ -181,7 +181,7 @@ edit_caption:
       description: Message body of the notification.
       example: The garage door has been open for 10 minutes.
     inline_keyboard:
-      description: List of rows of commands, comma-separated, to make a custom inline keyboard with buttons with asociated callback data.
+      description: List of rows of commands, comma-separated, to make a custom inline keyboard with buttons with associated callback data.
       example: '["/button1, /button2", "/button3"] or [[["Text button1", "/button1"], ["Text button2", "/button2"]], [["Text button3", "/button3"]]]'
 
 edit_replymarkup:
@@ -194,7 +194,7 @@ edit_replymarkup:
       description: The chat_id where to edit the reply_markup.
       example: 12345
     inline_keyboard:
-      description: List of rows of commands, comma-separated, to make a custom inline keyboard with buttons with asociated callback data.
+      description: List of rows of commands, comma-separated, to make a custom inline keyboard with buttons with associated callback data.
       example: '["/button1, /button2", "/button3"] or [[["Text button1", "/button1"], ["Text button2", "/button2"]], [["Text button3", "/button3"]]]'
 
 answer_callback_query:

homeassistant/components/zwave/__init__.py

@@ -219,7 +219,7 @@ def get_config_value(node, value_index, tries=5):
                     and value.index == value_index):
                 return value.data
     except RuntimeError:
-        # If we get an runtime error the dict has changed while
+        # If we get a runtime error the dict has changed while
         # we was looking for a value, just do it again
         return None if tries <= 0 else get_config_value(
             node, value_index, tries=tries - 1)

homeassistant/components/zwave/services.yaml

@@ -4,7 +4,7 @@ change_association:
   description: Change an association in the Z-Wave network.
   fields:
     association:
-      description: Specify add or remove assosication
+      description: Specify add or remove association
       example: add
     node_id:
       description: Node id of the node to set association for.
@@ -30,14 +30,14 @@ heal_network:
   description: Start a Z-Wave network heal. This might take a while and will slow down the Z-Wave network greatly while it is being processed. Refer to OZW.log for progress.
   fields:
     return_routes:
-    description: Wheter or not to update the return routes from the nodes to the controller. Defaults to False.
+    description: Whether or not to update the return routes from the nodes to the controller. Defaults to False.
     example: True
 
 heal_node:
   description: Start a Z-Wave node heal. Refer to OZW.log for progress.
   fields:
     return_routes:
-    description: Wheter or not to update the return routes from the node to the controller. Defaults to False.
+    description: Whether or not to update the return routes from the node to the controller. Defaults to False.
     example: True
 
 remove_node:

homeassistant/core.py

@@ -66,7 +66,7 @@ def valid_entity_id(entity_id: str) -> bool:
 
 
 def valid_state(state: str) -> bool:
-    """Test if an state is valid."""
+    """Test if a state is valid."""
     return len(state) < 256
 
 
@@ -777,7 +777,7 @@ class ServiceCall(object):
         self.call_id = call_id
 
     def __repr__(self):
-        """Return the represenation of the service."""
+        """Return the representation of the service."""
         if self.data:
             return "<ServiceCall {}.{}: {}>".format(
                 self.domain, self.service, util.repr_helper(self.data))

homeassistant/helpers/entity.py

@@ -268,7 +268,7 @@ class Entity(object):
             self.entity_id, state, attr, self.force_update)
 
     def schedule_update_ha_state(self, force_refresh=False):
-        """Schedule a update ha state change task.
+        """Schedule an update ha state change task.
 
         That avoid executor dead looks.
         """
@@ -276,7 +276,7 @@ class Entity(object):
 
     @callback
     def async_schedule_update_ha_state(self, force_refresh=False):
-        """Schedule a update ha state change task."""
+        """Schedule an update ha state change task."""
         self.hass.async_add_job(self.async_update_ha_state(force_refresh))
 
     @asyncio.coroutine

homeassistant/helpers/event.py

@@ -119,7 +119,7 @@ track_template = threaded_listener_factory(async_track_template)
 @bind_hass
 def async_track_same_state(hass, period, action, async_check_same_func,
                            entity_ids=MATCH_ALL):
-    """Track the state of entities for a period and run a action.
+    """Track the state of entities for a period and run an action.
 
     If async_check_func is None it use the state of orig_value.
     Without entity_ids we track all state changes.

homeassistant/loader.py

@@ -148,7 +148,7 @@ def get_component(comp_name) -> Optional[ModuleType]:
             # a namespace. We do not care about namespaces.
             # This prevents that when only
             # custom_components/switch/some_platform.py exists,
-            # the import custom_components.switch would succeeed.
+            # the import custom_components.switch would succeed.
             if module.__spec__.origin == 'namespace':
                 continue
 

homeassistant/util/__init__.py

@@ -227,7 +227,7 @@ class OrderedSet(MutableSet):
         return '%s(%r)' % (self.__class__.__name__, list(self))
 
     def __eq__(self, other):
-        """Return the comparision."""
+        """Return the comparison."""
         if isinstance(other, OrderedSet):
             return len(self) == len(other) and list(self) == list(other)
         return set(self) == set(other)

homeassistant/util/logging.py

@@ -23,7 +23,7 @@ class HideSensitiveDataFilter(logging.Filter):
 
 # pylint: disable=invalid-name
 class AsyncHandler(object):
-    """Logging handler wrapper to add a async layer."""
+    """Logging handler wrapper to add an async layer."""
 
     def __init__(self, loop, handler):
         """Initialize async logging handler wrapper."""

tests/components/camera/test_init.py

@@ -83,7 +83,7 @@ class TestGetImage(object):
     @patch('homeassistant.components.camera.demo.DemoCamera.camera_image',
            autospec=True, return_value=b'Test')
     def test_get_image_from_camera(self, mock_camera):
-        """Grab a image from camera entity."""
+        """Grab an image from camera entity."""
         self.hass.start()
 
         image = run_coroutine_threadsafe(camera.async_get_image(

tests/components/device_tracker/test_unifi_direct.py

@@ -139,12 +139,12 @@ class TestComponentsDeviceTrackerUnifiDirect(unittest.TestCase):
         devices = scanner._get_update()  # pylint: disable=protected-access
         self.assertTrue(devices is None)
 
-    def test_good_reponse_parses(self):
+    def test_good_response_parses(self):
         """Test that the response form the AP parses to JSON correctly."""
         response = _response_to_json(load_fixture('unifi_direct.txt'))
         self.assertTrue(response != {})
 
-    def test_bad_reponse_returns_none(self):
+    def test_bad_response_returns_none(self):
         """Test that a bad response form the AP parses to JSON correctly."""
         self.assertTrue(_response_to_json("{(}") == {})
 

tests/components/google_assistant/test_google_assistant.py

@@ -304,7 +304,7 @@ def test_query_climate_request_f(hass_fixture, assistant_client):
 
 @asyncio.coroutine
 def test_execute_request(hass_fixture, assistant_client):
-    """Test a execute request."""
+    """Test an execute request."""
     reqid = '5711642932632160985'
     data = {
         'requestId':

tests/components/image_processing/test_init.py

@@ -82,7 +82,7 @@ class TestImageProcessing(object):
     @patch('homeassistant.components.camera.demo.DemoCamera.camera_image',
            autospec=True, return_value=b'Test')
     def test_get_image_from_camera(self, mock_camera):
-        """Grab a image from camera entity."""
+        """Grab an image from camera entity."""
         self.hass.start()
 
         ip.scan(self.hass, entity_id='image_processing.test')

tests/components/light/test_litejet.py

@@ -156,7 +156,7 @@ class TestLiteJetLight(unittest.TestCase):
 
         # (Requesting the level is not strictly needed with a deactivated
         # event but the implementation happens to do it. This could be
-        # changed to a assert_not_called in the future.)
+        # changed to an assert_not_called in the future.)
         self.mock_lj.get_load_level.assert_called_with(
             ENTITY_OTHER_LIGHT_NUMBER)
 

tests/components/media_player/test_sonos.py

@@ -152,7 +152,7 @@ class TestSonosMediaPlayer(unittest.TestCase):
     @mock.patch('socket.create_connection', side_effect=socket.error())
     @mock.patch('soco.discover')
     def test_ensure_setup_config_interface_addr(self, discover_mock, *args):
-        """Test a interface address config'd by the HASS config file."""
+        """Test an interface address config'd by the HASS config file."""
         discover_mock.return_value = {SoCoMock('192.0.2.1')}
 
         config = {
@@ -172,7 +172,7 @@ class TestSonosMediaPlayer(unittest.TestCase):
     @mock.patch('soco.discover')
     def test_ensure_setup_config_advertise_addr(self, discover_mock,
                                                 *args):
-        """Test a advertise address config'd by the HASS config file."""
+        """Test an advertise address config'd by the HASS config file."""
         discover_mock.return_value = {SoCoMock('192.0.2.1')}
 
         config = {

tests/components/media_player/test_yamaha.py

@@ -44,7 +44,7 @@ class TestYamahaMediaPlayer(unittest.TestCase):
         self.hass.stop()
 
     def enable_output(self, port, enabled):
-        """Enable ouput on a specific port."""
+        """Enable output on a specific port."""
         data = {
             'entity_id': 'media_player.yamaha_receiver_main_zone',
             'port': port,

tests/components/recorder/test_migrate.py

@@ -25,7 +25,7 @@ def create_engine_test(*args, **kwargs):
 
 @asyncio.coroutine
 def test_schema_update_calls(hass):
-    """Test that schema migrations occurr in correct order."""
+    """Test that schema migrations occur in correct order."""
     with patch('sqlalchemy.create_engine', new=create_engine_test), \
         patch('homeassistant.components.recorder.migration._apply_update') as \
             update:

tests/components/sensor/test_dsmr.py

@@ -110,7 +110,7 @@ def test_derivative():
     yield from entity.async_update()
 
     assert entity.state == STATE_UNKNOWN, \
-        'state after first update shoudl still be unknown'
+        'state after first update should still be unknown'
 
     entity.telegram = {
         '1.0.0': MBusObject([

tests/components/test_dialogflow.py

@@ -435,7 +435,7 @@ class TestDialogflow(unittest.TestCase):
         self.assertEqual("virgo", call.data.get("hello"))
 
     def test_intent_with_no_action(self):
-        """Test a intent with no defined action."""
+        """Test an intent with no defined action."""
         data = {
             "id": REQUEST_ID,
             "timestamp": REQUEST_TIMESTAMP,
@@ -480,7 +480,7 @@ class TestDialogflow(unittest.TestCase):
             "You have not defined an action in your Dialogflow intent.", text)
 
     def test_intent_with_unknown_action(self):
-        """Test a intent with an action not defined in the conf."""
+        """Test an intent with an action not defined in the conf."""
         data = {
             "id": REQUEST_ID,
             "timestamp": REQUEST_TIMESTAMP,

tests/components/tts/test_yandextts.py

@@ -224,7 +224,7 @@ class TestTTSYandexPlatform(object):
 
         assert len(calls) == 0
 
-    def test_service_say_specifed_speaker(self, aioclient_mock):
+    def test_service_say_specified_speaker(self, aioclient_mock):
         """Test service call say."""
         calls = mock_service(self.hass, DOMAIN_MP, SERVICE_PLAY_MEDIA)
 
@@ -259,7 +259,7 @@ class TestTTSYandexPlatform(object):
         assert len(aioclient_mock.mock_calls) == 1
         assert len(calls) == 1
 
-    def test_service_say_specifed_emotion(self, aioclient_mock):
+    def test_service_say_specified_emotion(self, aioclient_mock):
         """Test service call say."""
         calls = mock_service(self.hass, DOMAIN_MP, SERVICE_PLAY_MEDIA)
 

tests/helpers/test_entity_component.py

@@ -130,7 +130,7 @@ class TestHelpersEntityComponent(unittest.TestCase):
         assert poll_ent.async_update.called
 
     def test_polling_updates_entities_with_exception(self):
-        """Test the updated entities that not break with a exception."""
+        """Test the updated entities that not break with an exception."""
         component = EntityComponent(
             _LOGGER, DOMAIN, self.hass, timedelta(seconds=20))
 
@@ -663,7 +663,7 @@ def test_raise_error_on_update(hass):
     entity2 = EntityTest(name='test_2')
 
     def _raise():
-        """Helper to raise a exception."""
+        """Helper to raise an exception."""
         raise AssertionError
 
     entity1.update = _raise

tests/test_bootstrap.py

@@ -17,7 +17,7 @@ VERSION_PATH = os.path.join(get_test_config_dir(), config_util.VERSION_FILE)
 _LOGGER = logging.getLogger(__name__)
 
 
-# prevent .HA_VERISON file from being written
+# prevent .HA_VERSION file from being written
 @patch(
     'homeassistant.bootstrap.conf_util.process_ha_config_upgrade', Mock())
 @patch('homeassistant.util.location.detect_location_info',

tests/test_core.py

@@ -172,7 +172,7 @@ class TestHomeAssistant(unittest.TestCase):
         assert len(call_count) == 2
 
     def test_async_add_job_pending_tasks_executor(self):
-        """Run a executor in pending tasks."""
+        """Run an executor in pending tasks."""
         call_count = []
 
         def test_executor():

tests/test_remote.py

@@ -28,7 +28,7 @@ def _url(path=''):
 
 # pylint: disable=invalid-name
 def setUpModule():
-    """Initalization of a Home Assistant server instance."""
+    """Initialization of a Home Assistant server instance."""
     global hass, master_api
 
     hass = get_test_home_assistant()

tests/util/test_yaml.py

@@ -48,7 +48,7 @@ class TestYaml(unittest.TestCase):
             load_yaml_config_file(YAML_CONFIG_FILE)
 
     def test_no_key(self):
-        """Test item without an key."""
+        """Test item without a key."""
         files = {YAML_CONFIG_FILE: 'a: a\nnokeyhere'}
         with self.assertRaises(HomeAssistantError), \
                 patch_yaml_files(files):