diff --git a/homeassistant/components/ambient_station/.translations/es-419.json b/homeassistant/components/ambient_station/.translations/es-419.json
new file mode 100644
index 00000000000..268a6ba001e
--- /dev/null
+++ b/homeassistant/components/ambient_station/.translations/es-419.json
@@ -0,0 +1,19 @@
+{
+    "config": {
+        "error": {
+            "identifier_exists": "Clave de aplicaci\u00f3n y/o clave de API ya registrada",
+            "invalid_key": "Clave de API y/o clave de aplicaci\u00f3n no v\u00e1lida",
+            "no_devices": "No se han encontrado dispositivos en la cuenta."
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "api_key": "Clave API",
+                    "app_key": "Clave de aplicaci\u00f3n"
+                },
+                "title": "Completa tu informaci\u00f3n"
+            }
+        },
+        "title": "Ambient PWS"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/ambient_station/.translations/hu.json b/homeassistant/components/ambient_station/.translations/hu.json
new file mode 100644
index 00000000000..222b512c39f
--- /dev/null
+++ b/homeassistant/components/ambient_station/.translations/hu.json
@@ -0,0 +1,19 @@
+{
+    "config": {
+        "error": {
+            "identifier_exists": "Alkalmaz\u00e1s kulcsot \u00e9s/vagy az API kulcsot m\u00e1r regisztr\u00e1lt\u00e1k",
+            "invalid_key": "\u00c9rv\u00e9nytelen API kulcs \u00e9s / vagy alkalmaz\u00e1skulcs",
+            "no_devices": "Nincs a fi\u00f3kodban tal\u00e1lhat\u00f3 eszk\u00f6z"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "api_key": "API kulcs",
+                    "app_key": "Alkalmaz\u00e1skulcs"
+                },
+                "title": "T\u00f6ltsd ki az adataid"
+            }
+        },
+        "title": "Ambient PWS"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/ambient_station/.translations/it.json b/homeassistant/components/ambient_station/.translations/it.json
new file mode 100644
index 00000000000..f87c987a79f
--- /dev/null
+++ b/homeassistant/components/ambient_station/.translations/it.json
@@ -0,0 +1,18 @@
+{
+    "config": {
+        "error": {
+            "identifier_exists": "API Key e/o Application Key gi\u00e0 registrata",
+            "invalid_key": "API Key e/o Application Key non valida",
+            "no_devices": "Nessun dispositivo trovato nell'account"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "api_key": "API Key",
+                    "app_key": "Application Key"
+                },
+                "title": "Inserisci i tuoi dati"
+            }
+        }
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/ambient_station/.translations/pt.json b/homeassistant/components/ambient_station/.translations/pt.json
index 01078bbddfe..92746b29f3d 100644
--- a/homeassistant/components/ambient_station/.translations/pt.json
+++ b/homeassistant/components/ambient_station/.translations/pt.json
@@ -1,11 +1,19 @@
 {
     "config": {
+        "error": {
+            "identifier_exists": "Chave de aplica\u00e7\u00e3o e/ou chave de API j\u00e1 registradas.",
+            "invalid_key": "Chave de API e/ou chave de aplica\u00e7\u00e3o inv\u00e1lidas",
+            "no_devices": "Nenhum dispositivo encontrado na conta"
+        },
         "step": {
             "user": {
                 "data": {
-                    "api_key": "Chave de API"
-                }
+                    "api_key": "Chave de API",
+                    "app_key": "Chave de aplica\u00e7\u00e3o"
+                },
+                "title": "Preencha as suas informa\u00e7\u00f5es"
             }
-        }
+        },
+        "title": "Ambient PWS"
     }
 }
\ No newline at end of file
diff --git a/homeassistant/components/ambient_station/.translations/sl.json b/homeassistant/components/ambient_station/.translations/sl.json
new file mode 100644
index 00000000000..906a6b404c4
--- /dev/null
+++ b/homeassistant/components/ambient_station/.translations/sl.json
@@ -0,0 +1,19 @@
+{
+    "config": {
+        "error": {
+            "identifier_exists": "Aplikacijski klju\u010d in / ali klju\u010d API je \u017ee registriran",
+            "invalid_key": "Neveljaven klju\u010d API in / ali klju\u010d aplikacije",
+            "no_devices": "V ra\u010dunu ni najdene nobene naprave"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "api_key": "API Klju\u010d",
+                    "app_key": "Klju\u010d aplikacije"
+                },
+                "title": "Izpolnite svoje podatke"
+            }
+        },
+        "title": "Ambient PWS"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/auth/.translations/es-419.json b/homeassistant/components/auth/.translations/es-419.json
index 6caa9d49993..852965596e0 100644
--- a/homeassistant/components/auth/.translations/es-419.json
+++ b/homeassistant/components/auth/.translations/es-419.json
@@ -1,8 +1,27 @@
 {
     "mfa_setup": {
+        "notify": {
+            "abort": {
+                "no_available_service": "No hay servicios de notificaci\u00f3n disponibles."
+            },
+            "error": {
+                "invalid_code": "C\u00f3digo inv\u00e1lido, por favor int\u00e9ntelo de nuevo."
+            },
+            "step": {
+                "init": {
+                    "description": "Por favor seleccione uno de los servicios de notificaci\u00f3n:",
+                    "title": "Configure la contrase\u00f1a de un solo uso entregada por el componente de notificaci\u00f3n"
+                },
+                "setup": {
+                    "description": "Se ha enviado una contrase\u00f1a \u00fanica a trav\u00e9s de **notify.{notify_service}**. Por favor ingr\u00e9selo a continuaci\u00f3n:",
+                    "title": "Verificar la configuracion"
+                }
+            }
+        },
         "totp": {
             "step": {
                 "init": {
+                    "description": "Para activar la autenticaci\u00f3n de dos factores utilizando contrase\u00f1as de un solo uso basadas en el tiempo, escanee el c\u00f3digo QR con su aplicaci\u00f3n de autenticaci\u00f3n. Si no tiene uno, le recomendamos [Autenticador de Google] (https://support.google.com/accounts/answer/1066447) o [Authy] (https://authy.com/). \n\n {qr_code} \n \n Despu\u00e9s de escanear el c\u00f3digo, ingrese el c\u00f3digo de seis d\u00edgitos de su aplicaci\u00f3n para verificar la configuraci\u00f3n. Si tiene problemas para escanear el c\u00f3digo QR, realice una configuraci\u00f3n manual con el c\u00f3digo ** ` {code} ` **.",
                     "title": "Configurar la autenticaci\u00f3n de dos factores mediante TOTP"
                 }
             },
diff --git a/homeassistant/components/auth/.translations/hu.json b/homeassistant/components/auth/.translations/hu.json
index 0a3a3c58820..a2d132d9073 100644
--- a/homeassistant/components/auth/.translations/hu.json
+++ b/homeassistant/components/auth/.translations/hu.json
@@ -9,7 +9,8 @@
             },
             "step": {
                 "init": {
-                    "description": "V\u00e1lassz \u00e9rtes\u00edt\u00e9si szolg\u00e1ltat\u00e1st:"
+                    "description": "V\u00e1lassz \u00e9rtes\u00edt\u00e9si szolg\u00e1ltat\u00e1st:",
+                    "title": "\u00c1ll\u00edtsa be az \u00e9rtes\u00edt\u00e9si \u00f6sszetev\u0151 \u00e1ltal megadott egyszeri jelsz\u00f3t"
                 },
                 "setup": {
                     "title": "Be\u00e1ll\u00edt\u00e1s ellen\u0151rz\u00e9se"
diff --git a/homeassistant/components/auth/.translations/it.json b/homeassistant/components/auth/.translations/it.json
index 25dad4c1aeb..be06f0209c4 100644
--- a/homeassistant/components/auth/.translations/it.json
+++ b/homeassistant/components/auth/.translations/it.json
@@ -9,7 +9,8 @@
             },
             "step": {
                 "init": {
-                    "description": "Selezionare uno dei servizi di notifica:"
+                    "description": "Selezionare uno dei servizi di notifica:",
+                    "title": "Imposta la password one-time fornita dal componente di notifica"
                 },
                 "setup": {
                     "description": "\u00c8 stata inviata una password monouso tramite **notify.{notify_service}**. Per favore, inseriscila qui sotto:",
diff --git a/homeassistant/components/daikin/.translations/es-419.json b/homeassistant/components/daikin/.translations/es-419.json
new file mode 100644
index 00000000000..dae3afdba6f
--- /dev/null
+++ b/homeassistant/components/daikin/.translations/es-419.json
@@ -0,0 +1,17 @@
+{
+    "config": {
+        "abort": {
+            "device_timeout": "Tiempo de espera de conexi\u00f3n al dispositivo."
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "host": "Host"
+                },
+                "description": "Introduzca la direcci\u00f3n IP de su Daikin AC.",
+                "title": "Configurar Daikin AC"
+            }
+        },
+        "title": "Daikin AC"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/daikin/.translations/hu.json b/homeassistant/components/daikin/.translations/hu.json
index 623fab6828a..cbca935f551 100644
--- a/homeassistant/components/daikin/.translations/hu.json
+++ b/homeassistant/components/daikin/.translations/hu.json
@@ -1,11 +1,19 @@
 {
     "config": {
+        "abort": {
+            "already_configured": "Az eszk\u00f6zt m\u00e1r konfigur\u00e1ltuk",
+            "device_fail": "Az eszk\u00f6z l\u00e9trehoz\u00e1sakor v\u00e1ratlan hiba l\u00e9pett fel.",
+            "device_timeout": "Id\u0151t\u00fall\u00e9p\u00e9s a k\u00e9sz\u00fcl\u00e9k csatlakoz\u00e1sakor."
+        },
         "step": {
             "user": {
                 "data": {
                     "host": "Kiszolg\u00e1l\u00f3"
-                }
+                },
+                "description": "Add meg a Daikin l\u00e9gkond\u00edcion\u00e1l\u00f3 IP-c\u00edm\u00e9t.",
+                "title": "A Daikin l\u00e9gkond\u00edcion\u00e1l\u00f3 konfigur\u00e1l\u00e1sa"
             }
-        }
+        },
+        "title": "Daikin L\u00e9gkond\u00edci\u00f3n\u00e1l\u00f3"
     }
 }
\ No newline at end of file
diff --git a/homeassistant/components/daikin/.translations/it.json b/homeassistant/components/daikin/.translations/it.json
new file mode 100644
index 00000000000..0b8151d23f6
--- /dev/null
+++ b/homeassistant/components/daikin/.translations/it.json
@@ -0,0 +1,19 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "Il dispositivo \u00e8 gi\u00e0 configurato",
+            "device_fail": "Errore inatteso durante la creazione del dispositivo.",
+            "device_timeout": "Tempo scaduto per la connessione al dispositivo."
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "host": "Host"
+                },
+                "description": "Inserisci l'indirizzo IP del tuo Daikin AC.",
+                "title": "Configura Daikin AC"
+            }
+        },
+        "title": "Daikin AC"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/deconz/.translations/es-419.json b/homeassistant/components/deconz/.translations/es-419.json
index ab47a5b43c8..7d8f77fe3a2 100644
--- a/homeassistant/components/deconz/.translations/es-419.json
+++ b/homeassistant/components/deconz/.translations/es-419.json
@@ -23,7 +23,8 @@
                 "data": {
                     "allow_clip_sensor": "Permitir la importaci\u00f3n de sensores virtuales",
                     "allow_deconz_groups": "Permitir la importaci\u00f3n de grupos deCONZ"
-                }
+                },
+                "title": "Opciones de configuraci\u00f3n adicionales para deCONZ"
             }
         },
         "title": "deCONZ Zigbee gateway"
diff --git a/homeassistant/components/deconz/.translations/hu.json b/homeassistant/components/deconz/.translations/hu.json
index fbb5c26ba04..06211f61bf2 100644
--- a/homeassistant/components/deconz/.translations/hu.json
+++ b/homeassistant/components/deconz/.translations/hu.json
@@ -12,7 +12,7 @@
             "init": {
                 "data": {
                     "host": "H\u00e1zigazda (Host)",
-                    "port": "Port (alap\u00e9rtelmezett \u00e9rt\u00e9k: '80')"
+                    "port": "Port"
                 },
                 "title": "deCONZ \u00e1tj\u00e1r\u00f3 megad\u00e1sa"
             },
diff --git a/homeassistant/components/deconz/.translations/it.json b/homeassistant/components/deconz/.translations/it.json
index 87dcd0610f2..c0a23d47be3 100644
--- a/homeassistant/components/deconz/.translations/it.json
+++ b/homeassistant/components/deconz/.translations/it.json
@@ -28,6 +28,6 @@
                 "title": "Opzioni di configurazione extra per deCONZ"
             }
         },
-        "title": "deCONZ"
+        "title": "Gateway Zigbee deCONZ"
     }
 }
\ No newline at end of file
diff --git a/homeassistant/components/dialogflow/.translations/es-419.json b/homeassistant/components/dialogflow/.translations/es-419.json
new file mode 100644
index 00000000000..41a66b038f5
--- /dev/null
+++ b/homeassistant/components/dialogflow/.translations/es-419.json
@@ -0,0 +1,18 @@
+{
+    "config": {
+        "abort": {
+            "not_internet_accessible": "Su instancia de Home Assistant debe ser accesible desde Internet para recibir mensajes de Dialogflow.",
+            "one_instance_allowed": "Solo una instancia es necesaria."
+        },
+        "create_entry": {
+            "default": "Para enviar eventos a Home Assistant, deber\u00e1 configurar [integraci\u00f3n de webhook de Dialogflow] ( {dialogflow_url} ). \n\n Complete la siguiente informaci\u00f3n: \n\n - URL: ` {webhook_url} ` \n - M\u00e9todo: POST \n - Tipo de contenido: aplicaci\u00f3n / json \n\n Vea [la documentaci\u00f3n] ( {docs_url} ) para m\u00e1s detalles."
+        },
+        "step": {
+            "user": {
+                "description": "\u00bfEst\u00e1 seguro de que desea configurar Dialogflow?",
+                "title": "Configurar el Webhook de Dialogflow"
+            }
+        },
+        "title": "Dialogflow"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/dialogflow/.translations/it.json b/homeassistant/components/dialogflow/.translations/it.json
new file mode 100644
index 00000000000..cc1a7ac8510
--- /dev/null
+++ b/homeassistant/components/dialogflow/.translations/it.json
@@ -0,0 +1,18 @@
+{
+    "config": {
+        "abort": {
+            "not_internet_accessible": "La tua istanza di Home Assistant deve essere accessibile da Internet per ricevere messaggi da Dialogflow.",
+            "one_instance_allowed": "\u00c8 necessaria una sola istanza."
+        },
+        "create_entry": {
+            "default": "Per inviare eventi a Home Assistant, dovrai configurare [l'integrazione webhook di Dialogflow]({dialogflow_url})\n\n Compila le seguenti informazioni: \n\n - URL: ` {webhook_url} ` \n - Method: POST \n - Content Type: application/json \n\n Vedi [la documentazione]({docs_url}) for ulteriori dettagli."
+        },
+        "step": {
+            "user": {
+                "description": "Sei sicuro di voler configurare Dialogflow?",
+                "title": "Configura il webhook di Dialogflow"
+            }
+        },
+        "title": "Dialogflow"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/ebusd/.translations/es-419.json b/homeassistant/components/ebusd/.translations/es-419.json
new file mode 100644
index 00000000000..7a6291e3f17
--- /dev/null
+++ b/homeassistant/components/ebusd/.translations/es-419.json
@@ -0,0 +1,6 @@
+{
+    "state": {
+        "day": "D\u00eda",
+        "night": "Noche"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/ebusd/.translations/es.json b/homeassistant/components/ebusd/.translations/es.json
new file mode 100644
index 00000000000..7a6291e3f17
--- /dev/null
+++ b/homeassistant/components/ebusd/.translations/es.json
@@ -0,0 +1,6 @@
+{
+    "state": {
+        "day": "D\u00eda",
+        "night": "Noche"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/ebusd/.translations/hu.json b/homeassistant/components/ebusd/.translations/hu.json
new file mode 100644
index 00000000000..a5ab8f0d194
--- /dev/null
+++ b/homeassistant/components/ebusd/.translations/hu.json
@@ -0,0 +1,6 @@
+{
+    "state": {
+        "day": "Nappal",
+        "night": "\u00c9jszaka"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/ebusd/.translations/no.json b/homeassistant/components/ebusd/.translations/no.json
new file mode 100644
index 00000000000..92f4355066d
--- /dev/null
+++ b/homeassistant/components/ebusd/.translations/no.json
@@ -0,0 +1,6 @@
+{
+    "state": {
+        "day": "Dag",
+        "night": "Natt"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/ebusd/.translations/pt.json b/homeassistant/components/ebusd/.translations/pt.json
new file mode 100644
index 00000000000..9925fdfab9c
--- /dev/null
+++ b/homeassistant/components/ebusd/.translations/pt.json
@@ -0,0 +1,6 @@
+{
+    "state": {
+        "day": "Dia",
+        "night": "Noite"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/ebusd/.translations/sl.json b/homeassistant/components/ebusd/.translations/sl.json
new file mode 100644
index 00000000000..de2ca81f8a8
--- /dev/null
+++ b/homeassistant/components/ebusd/.translations/sl.json
@@ -0,0 +1,6 @@
+{
+    "state": {
+        "day": "Dan",
+        "night": "No\u010d"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/ebusd/.translations/uk.json b/homeassistant/components/ebusd/.translations/uk.json
new file mode 100644
index 00000000000..2e7a22e49a3
--- /dev/null
+++ b/homeassistant/components/ebusd/.translations/uk.json
@@ -0,0 +1,6 @@
+{
+    "state": {
+        "day": "\u0414\u0435\u043d\u044c",
+        "night": "\u041d\u0456\u0447"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/emulated_roku/.translations/es-419.json b/homeassistant/components/emulated_roku/.translations/es-419.json
new file mode 100644
index 00000000000..51c18c764db
--- /dev/null
+++ b/homeassistant/components/emulated_roku/.translations/es-419.json
@@ -0,0 +1,17 @@
+{
+    "config": {
+        "abort": {
+            "name_exists": "El nombre ya existe"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "host_ip": "IP del host",
+                    "name": "Nombre"
+                },
+                "title": "Definir la configuraci\u00f3n del servidor."
+            }
+        },
+        "title": "EmulatedRoku"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/emulated_roku/.translations/hu.json b/homeassistant/components/emulated_roku/.translations/hu.json
new file mode 100644
index 00000000000..c38e6890d8a
--- /dev/null
+++ b/homeassistant/components/emulated_roku/.translations/hu.json
@@ -0,0 +1,18 @@
+{
+    "config": {
+        "abort": {
+            "name_exists": "A n\u00e9v m\u00e1r l\u00e9tezik"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "host_ip": "H\u00e1zigazda IP",
+                    "listen_port": "Port figyel\u00e9se",
+                    "name": "N\u00e9v"
+                },
+                "title": "A kiszolg\u00e1l\u00f3 szerver konfigur\u00e1l\u00e1sa"
+            }
+        },
+        "title": "EmulatedRoku"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/emulated_roku/.translations/it.json b/homeassistant/components/emulated_roku/.translations/it.json
new file mode 100644
index 00000000000..cba89add799
--- /dev/null
+++ b/homeassistant/components/emulated_roku/.translations/it.json
@@ -0,0 +1,17 @@
+{
+    "config": {
+        "abort": {
+            "name_exists": "Il nome \u00e8 gi\u00e0 esistente"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "host_ip": "Indirizzo IP dell'host",
+                    "name": "Nome"
+                },
+                "title": "Definisci la configurazione del server"
+            }
+        },
+        "title": "EmulatedRoku"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/emulated_roku/.translations/pt.json b/homeassistant/components/emulated_roku/.translations/pt.json
index 286cd58dd89..138e077d4a4 100644
--- a/homeassistant/components/emulated_roku/.translations/pt.json
+++ b/homeassistant/components/emulated_roku/.translations/pt.json
@@ -1,11 +1,21 @@
 {
     "config": {
+        "abort": {
+            "name_exists": "Nome j\u00e1 existe"
+        },
         "step": {
             "user": {
                 "data": {
-                    "name": "Nome"
-                }
+                    "advertise_ip": "Anuncie o IP",
+                    "advertise_port": "Anuncie porto",
+                    "host_ip": "IP do host",
+                    "listen_port": "Porta \u00e0 escuta",
+                    "name": "Nome",
+                    "upnp_bind_multicast": "Liga\u00e7\u00e3o multicast (Verdadeiro/Falso)"
+                },
+                "title": "Definir configura\u00e7\u00e3o do servidor"
             }
-        }
+        },
+        "title": "EmulatedRoku"
     }
 }
\ No newline at end of file
diff --git a/homeassistant/components/esphome/.translations/es-419.json b/homeassistant/components/esphome/.translations/es-419.json
new file mode 100644
index 00000000000..3557095d094
--- /dev/null
+++ b/homeassistant/components/esphome/.translations/es-419.json
@@ -0,0 +1,30 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "ESP ya est\u00e1 configurado"
+        },
+        "error": {
+            "connection_error": "No se puede conectar a ESP. Aseg\u00farese de que su archivo YAML contenga una l\u00ednea 'api:'.",
+            "invalid_password": "\u00a1Contrase\u00f1a invalida!",
+            "resolve_error": "No se puede resolver la direcci\u00f3n de la ESP. Si este error persiste, configure una direcci\u00f3n IP est\u00e1tica: https://esphomelib.com/esphomeyaml/components/wifi.html#manual-ips"
+        },
+        "step": {
+            "authenticate": {
+                "data": {
+                    "password": "Contrase\u00f1a"
+                },
+                "description": "Por favor ingrese la contrase\u00f1a que estableci\u00f3 en su configuraci\u00f3n.",
+                "title": "Escriba la contrase\u00f1a"
+            },
+            "user": {
+                "data": {
+                    "host": "Host",
+                    "port": "Puerto"
+                },
+                "description": "Por favor Ingrese la configuraci\u00f3n de conexi\u00f3n de su nodo [ESPHome] (https://esphomelib.com/).",
+                "title": "ESPHome"
+            }
+        },
+        "title": "ESPHome"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/esphome/.translations/hu.json b/homeassistant/components/esphome/.translations/hu.json
index 7fe5da59de6..1e72bd8030c 100644
--- a/homeassistant/components/esphome/.translations/hu.json
+++ b/homeassistant/components/esphome/.translations/hu.json
@@ -1,6 +1,10 @@
 {
     "config": {
+        "abort": {
+            "already_configured": "Az ESP-t m\u00e1r konfigur\u00e1ltad."
+        },
         "error": {
+            "connection_error": "Nem tud csatlakozni az ESP-hez. K\u00e9rlek gy\u0151z\u0151dj meg r\u00f3la, hogy a YAML f\u00e1jl tartalmaz egy \"api:\" sort.",
             "invalid_password": "\u00c9rv\u00e9nytelen jelsz\u00f3!"
         },
         "step": {
@@ -8,6 +12,7 @@
                 "data": {
                     "password": "Jelsz\u00f3"
                 },
+                "description": "K\u00e9rj\u00fck, add meg a konfigur\u00e1ci\u00f3ban be\u00e1ll\u00edtott jelsz\u00f3t.",
                 "title": "Adja meg a jelsz\u00f3t"
             },
             "user": {
diff --git a/homeassistant/components/esphome/.translations/it.json b/homeassistant/components/esphome/.translations/it.json
new file mode 100644
index 00000000000..d3c51f0497f
--- /dev/null
+++ b/homeassistant/components/esphome/.translations/it.json
@@ -0,0 +1,30 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "ESP \u00e8 gi\u00e0 configurato"
+        },
+        "error": {
+            "connection_error": "Impossibile connettersi ad ESP. Assicurati che il tuo file YAML contenga una riga \"api:\".",
+            "invalid_password": "Password non valida!",
+            "resolve_error": "Impossibile risolvere l'indirizzo dell'ESP. Se questo errore persiste, impostare un indirizzo IP statico: https://esphomelib.com/esphomeyaml/components/wifi.html#manual-ips"
+        },
+        "step": {
+            "authenticate": {
+                "data": {
+                    "password": "Password"
+                },
+                "description": "Inserisci la password che hai impostato nella tua configurazione.",
+                "title": "Inserisci la password"
+            },
+            "user": {
+                "data": {
+                    "host": "Host",
+                    "port": "Porta"
+                },
+                "description": "Inserisci le impostazioni di connessione del tuo nodo [ESPHome] (https://esphomelib.com/).",
+                "title": "ESPHome"
+            }
+        },
+        "title": "ESPHome"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/geofency/.translations/es-419.json b/homeassistant/components/geofency/.translations/es-419.json
new file mode 100644
index 00000000000..637a430a1f8
--- /dev/null
+++ b/homeassistant/components/geofency/.translations/es-419.json
@@ -0,0 +1,18 @@
+{
+    "config": {
+        "abort": {
+            "not_internet_accessible": "Su instancia de Home Assistant debe ser accesible desde Internet para recibir mensajes de Geofency.",
+            "one_instance_allowed": "Solo una instancia es necesaria."
+        },
+        "create_entry": {
+            "default": "Para enviar eventos a Home Assistant, deber\u00e1 configurar la funci\u00f3n de webhook en Geofency. \n\n Complete la siguiente informaci\u00f3n: \n\n - URL: ` {webhook_url} ` \n - M\u00e9todo: POST \n\n Vea [la documentaci\u00f3n] ( {docs_url} ) para m\u00e1s detalles."
+        },
+        "step": {
+            "user": {
+                "description": "\u00bfEst\u00e1s seguro de que quieres montar el Webhook de Geofency?",
+                "title": "Configurar el Webhook de Geofency"
+            }
+        },
+        "title": "Geofency Webhook"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/geofency/.translations/hu.json b/homeassistant/components/geofency/.translations/hu.json
new file mode 100644
index 00000000000..85f71d74434
--- /dev/null
+++ b/homeassistant/components/geofency/.translations/hu.json
@@ -0,0 +1,18 @@
+{
+    "config": {
+        "abort": {
+            "not_internet_accessible": "Az Home Assistantnek el\u00e9rhet\u0151nek kell lennie az internetr\u0151l, hogy megkapja a Geofency \u00fczeneteit.",
+            "one_instance_allowed": "Csak egy p\u00e9ld\u00e1ny sz\u00fcks\u00e9ges."
+        },
+        "create_entry": {
+            "default": "Az esem\u00e9ny Home Assistantnek val\u00f3 k\u00fcld\u00e9s\u00e9hez be kell \u00e1ll\u00edtanod a webhook funkci\u00f3t a Geofencyben. \n\n Az al\u00e1bbi inform\u00e1ci\u00f3kat haszn\u00e1ld: \n\n - URL: ` {webhook_url} ` \n - Method: POST \n\n Tov\u00e1bbi r\u00e9szletek a [dokument\u00e1ci\u00f3] ( {docs_url} ) linken tal\u00e1lhat\u00f3k."
+        },
+        "step": {
+            "user": {
+                "description": "Biztosan be szeretn\u00e9d \u00e1ll\u00edtani a Geofency Webhookot?",
+                "title": "A Geofency Webhook be\u00e1ll\u00edt\u00e1sa"
+            }
+        },
+        "title": "Geofency Webhook"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/geofency/.translations/it.json b/homeassistant/components/geofency/.translations/it.json
new file mode 100644
index 00000000000..1adad3825a3
--- /dev/null
+++ b/homeassistant/components/geofency/.translations/it.json
@@ -0,0 +1,18 @@
+{
+    "config": {
+        "abort": {
+            "not_internet_accessible": "La tua istanza di Home Assistant deve essere accessibile da Internet per ricevere messaggi da Geofency.",
+            "one_instance_allowed": "\u00c8 necessaria una sola istanza."
+        },
+        "create_entry": {
+            "default": "Per inviare eventi a Home Assistant, dovrai configurare la funzionalit\u00e0 webhook in Geofency.\n\n Compila le seguenti informazioni: \n\n - URL: ` {webhook_url} ` \n - Method: POST \n\n Vedi [la documentazione]({docs_url}) for ulteriori dettagli."
+        },
+        "step": {
+            "user": {
+                "description": "Sei sicuro di voler configurare il webhook di Geofency?",
+                "title": "Configura il webhook di Geofency"
+            }
+        },
+        "title": "Webhook di Geofency"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/geofency/.translations/pt.json b/homeassistant/components/geofency/.translations/pt.json
new file mode 100644
index 00000000000..bc68c3ec822
--- /dev/null
+++ b/homeassistant/components/geofency/.translations/pt.json
@@ -0,0 +1,18 @@
+{
+    "config": {
+        "abort": {
+            "not_internet_accessible": "A sua inst\u00e2ncia Home Assistent precisa de ser acess\u00edvel a partir da internet para receber mensagens IFTTT.",
+            "one_instance_allowed": "Apenas uma inst\u00e2ncia \u00e9 necess\u00e1ria."
+        },
+        "create_entry": {
+            "default": "Para enviar eventos para o Home Assistant, \u00e9 necess\u00e1rio configurar um webhook no Geofency. \n\n Preencha as seguintes informa\u00e7\u00f5es: \n\n - URL: `{webhook_url}`\n - M\u00e9todo: POST \n\n Veja [the documentation]({docs_url}) para obter mais detalhes."
+        },
+        "step": {
+            "user": {
+                "description": "Tem certeza de que deseja configurar o Geofency Webhook?",
+                "title": "Configurar o Geofency Webhook"
+            }
+        },
+        "title": "Geofency Webhook"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/gpslogger/.translations/es-419.json b/homeassistant/components/gpslogger/.translations/es-419.json
new file mode 100644
index 00000000000..960198eb04e
--- /dev/null
+++ b/homeassistant/components/gpslogger/.translations/es-419.json
@@ -0,0 +1,18 @@
+{
+    "config": {
+        "abort": {
+            "not_internet_accessible": "Su instancia de Home Assistant debe ser accesible desde Internet para recibir mensajes de GPSLogger.",
+            "one_instance_allowed": "Solo una instancia es necesaria."
+        },
+        "create_entry": {
+            "default": "Para enviar eventos a Home Assistant, deber\u00e1 configurar la funci\u00f3n de webhook en GPSLogger. \n\n Complete la siguiente informaci\u00f3n: \n\n - URL: ` {webhook_url} ` \n - M\u00e9todo: POST \n\n Vea [la documentaci\u00f3n] ( {docs_url} ) para m\u00e1s detalles."
+        },
+        "step": {
+            "user": {
+                "description": "\u00bfEst\u00e1 seguro de que desea configurar el Webhook de GPSLogger?",
+                "title": "Configurar el Webhook de GPSLogger"
+            }
+        },
+        "title": "GPSLogger Webhook"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/gpslogger/.translations/hu.json b/homeassistant/components/gpslogger/.translations/hu.json
new file mode 100644
index 00000000000..2d1dcad2174
--- /dev/null
+++ b/homeassistant/components/gpslogger/.translations/hu.json
@@ -0,0 +1,18 @@
+{
+    "config": {
+        "abort": {
+            "not_internet_accessible": "Az Home Assistantnek el\u00e9rhet\u0151nek kell lennie az internetr\u0151l, hogy megkapja a GPSLogger \u00fczeneteit.",
+            "one_instance_allowed": "Csak egy p\u00e9ld\u00e1ny sz\u00fcks\u00e9ges."
+        },
+        "create_entry": {
+            "default": "Az esem\u00e9ny Home Assistantnek val\u00f3 k\u00fcld\u00e9s\u00e9hez be kell \u00e1ll\u00edtanod a webhook funkci\u00f3t a GPSLoggerben. \n\n Az al\u00e1bbi inform\u00e1ci\u00f3kat haszn\u00e1ld: \n\n - URL: ` {webhook_url} ` \n - Method: POST \n\n Tov\u00e1bbi r\u00e9szletek a [dokument\u00e1ci\u00f3] ( {docs_url} ) linken tal\u00e1lhat\u00f3k."
+        },
+        "step": {
+            "user": {
+                "description": "Biztosan be szeretn\u00e9d \u00e1ll\u00edtani a GPSLogger Webhookot?",
+                "title": "GPSLogger Webhook be\u00e1ll\u00edt\u00e1sa"
+            }
+        },
+        "title": "GPSLogger Webhook"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/gpslogger/.translations/it.json b/homeassistant/components/gpslogger/.translations/it.json
new file mode 100644
index 00000000000..aab8edbe44a
--- /dev/null
+++ b/homeassistant/components/gpslogger/.translations/it.json
@@ -0,0 +1,18 @@
+{
+    "config": {
+        "abort": {
+            "not_internet_accessible": "La tua istanza di Home Assistant deve essere accessibile da Internet per ricevere messaggi da GPSLogger.",
+            "one_instance_allowed": "\u00c8 necessaria una sola istanza."
+        },
+        "create_entry": {
+            "default": "Per inviare eventi a Home Assistant, dovrai configurare la funzionalit\u00e0 webhook in GPSLogger.\n\n Compila le seguenti informazioni: \n\n - URL: ` {webhook_url} ` \n - Method: POST \n\n Vedi [la documentazione]({docs_url}) for ulteriori dettagli."
+        },
+        "step": {
+            "user": {
+                "description": "Sei sicuro di voler configurare il webhook di GPSLogger?",
+                "title": "Configura il webhook di GPSLogger"
+            }
+        },
+        "title": "Webhook di GPSLogger"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/gpslogger/.translations/pt.json b/homeassistant/components/gpslogger/.translations/pt.json
new file mode 100644
index 00000000000..4dcfda52753
--- /dev/null
+++ b/homeassistant/components/gpslogger/.translations/pt.json
@@ -0,0 +1,18 @@
+{
+    "config": {
+        "abort": {
+            "not_internet_accessible": "A sua inst\u00e2ncia Home Assistent precisa de ser acess\u00edvel a partir da internet para receber mensagens GPSlogger.",
+            "one_instance_allowed": "Apenas uma inst\u00e2ncia \u00e9 necess\u00e1ria."
+        },
+        "create_entry": {
+            "default": "Para enviar eventos para o Home Assistant, \u00e9 necess\u00e1rio configurar um webhook no GPslogger. \n\n Preencha as seguintes informa\u00e7\u00f5es: \n\n - URL: `{webhook_url}`\n - M\u00e9todo: POST \n\n Veja [the documentation]({docs_url}) para obter mais detalhes."
+        },
+        "step": {
+            "user": {
+                "description": "Tem certeza de que deseja configurar o GPSLogger Webhook?",
+                "title": "Configurar o Geofency Webhook"
+            }
+        },
+        "title": "GPSLogger Webhook"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/hangouts/.translations/es-419.json b/homeassistant/components/hangouts/.translations/es-419.json
index a3699db08ae..ab78213b53a 100644
--- a/homeassistant/components/hangouts/.translations/es-419.json
+++ b/homeassistant/components/hangouts/.translations/es-419.json
@@ -4,7 +4,13 @@
             "already_configured": "Google Hangouts ya est\u00e1 configurado",
             "unknown": "Se produjo un error desconocido."
         },
+        "error": {
+            "invalid_login": "Inicio de sesi\u00f3n no v\u00e1lido, por favor, int\u00e9ntalo de nuevo."
+        },
         "step": {
+            "2fa": {
+                "title": "Autenticaci\u00f3n de 2 factores"
+            },
             "user": {
                 "data": {
                     "email": "Direcci\u00f3n de correo electr\u00f3nico",
diff --git a/homeassistant/components/homematicip_cloud/.translations/es-419.json b/homeassistant/components/homematicip_cloud/.translations/es-419.json
index 8675d6e12b1..61d7defcb66 100644
--- a/homeassistant/components/homematicip_cloud/.translations/es-419.json
+++ b/homeassistant/components/homematicip_cloud/.translations/es-419.json
@@ -17,6 +17,9 @@
                     "name": "Nombre (opcional, usado como prefijo de nombre para todos los dispositivos)",
                     "pin": "C\u00f3digo PIN (opcional)"
                 }
+            },
+            "link": {
+                "description": "Presione el bot\u00f3n azul en el punto de acceso y el bot\u00f3n enviar para registrar HomematicIP con Home Assistant. \n\n ! [Ubicaci\u00f3n del bot\u00f3n en el puente] (/ static / images / config_flows / config_homematicip_cloud.png)"
             }
         },
         "title": "HomematicIP Cloud"
diff --git a/homeassistant/components/homematicip_cloud/.translations/hu.json b/homeassistant/components/homematicip_cloud/.translations/hu.json
index cfb4f5e87fd..61ff5ac5fe2 100644
--- a/homeassistant/components/homematicip_cloud/.translations/hu.json
+++ b/homeassistant/components/homematicip_cloud/.translations/hu.json
@@ -1,19 +1,27 @@
 {
     "config": {
         "abort": {
+            "already_configured": "A hozz\u00e1f\u00e9r\u00e9si pontot m\u00e1r konfigur\u00e1ltuk",
             "connection_aborted": "Nem siker\u00fclt csatlakozni a HMIP szerverhez",
             "unknown": "Unknown error occurred."
         },
         "error": {
             "invalid_pin": "\u00c9rv\u00e9nytelen PIN, pr\u00f3b\u00e1lkozz \u00fajra.",
             "press_the_button": "Nyomd meg a k\u00e9k gombot.",
-            "register_failed": "Regisztr\u00e1ci\u00f3 nem siker\u00fclt, pr\u00f3b\u00e1ld \u00fajra."
+            "register_failed": "Regisztr\u00e1ci\u00f3 nem siker\u00fclt, pr\u00f3b\u00e1ld \u00fajra.",
+            "timeout_button": "K\u00e9k gomb megnyom\u00e1s\u00e1nak id\u0151t\u00fall\u00e9p\u00e9se, pr\u00f3b\u00e1lkozz \u00fajra."
         },
         "step": {
             "init": {
                 "data": {
+                    "hapid": "Hozz\u00e1f\u00e9r\u00e9si pont azonos\u00edt\u00f3ja (SGTIN)",
+                    "name": "N\u00e9v (opcion\u00e1lis, minden eszk\u00f6z n\u00e9vel\u0151tagjak\u00e9nt haszn\u00e1latos)",
                     "pin": "Pin k\u00f3d (opcion\u00e1lis)"
-                }
+                },
+                "title": "V\u00e1lassz HomematicIP hozz\u00e1f\u00e9r\u00e9si pontot"
+            },
+            "link": {
+                "title": "Link Hozz\u00e1f\u00e9r\u00e9si pont"
             }
         },
         "title": "HomematicIP Felh\u0151"
diff --git a/homeassistant/components/homematicip_cloud/.translations/it.json b/homeassistant/components/homematicip_cloud/.translations/it.json
index 9ef1abd500c..6e6d7c8a59f 100644
--- a/homeassistant/components/homematicip_cloud/.translations/it.json
+++ b/homeassistant/components/homematicip_cloud/.translations/it.json
@@ -2,19 +2,29 @@
     "config": {
         "abort": {
             "already_configured": "Il punto di accesso \u00e8 gi\u00e0 configurato",
-            "connection_aborted": "Impossibile connettersi al server HMIP"
+            "connection_aborted": "Impossibile connettersi al server HMIP",
+            "unknown": "Si \u00e8 verificato un errore sconosciuto."
         },
         "error": {
             "invalid_pin": "PIN non valido, riprova.",
             "press_the_button": "Si prega di premere il pulsante blu.",
-            "register_failed": "Registrazione fallita, si prega di riprovare."
+            "register_failed": "Registrazione fallita, si prega di riprovare.",
+            "timeout_button": "Timeout della pressione del pulsante blu, riprovare."
         },
         "step": {
             "init": {
                 "data": {
+                    "hapid": "ID del punto di accesso (SGTIN)",
+                    "name": "Nome (facoltativo, utilizzato come prefisso del nome per tutti i dispositivi)",
                     "pin": "Codice Pin (opzionale)"
-                }
+                },
+                "title": "Scegli punto di accesso HomematicIP"
+            },
+            "link": {
+                "description": "Premi il pulsante blu sull'access point ed il pulsante di invio per registrare HomematicIP con Home Assistant. \n\n ![Posizione del pulsante sul bridge](/static/images/config_flows/config_homematicip_cloud.png)",
+                "title": "Collegamento access point"
             }
-        }
+        },
+        "title": "HomematicIP Cloud"
     }
 }
\ No newline at end of file
diff --git a/homeassistant/components/ifttt/.translations/es-419.json b/homeassistant/components/ifttt/.translations/es-419.json
new file mode 100644
index 00000000000..46096bbe631
--- /dev/null
+++ b/homeassistant/components/ifttt/.translations/es-419.json
@@ -0,0 +1,17 @@
+{
+    "config": {
+        "abort": {
+            "not_internet_accessible": "Su instancia de Home Assistant debe estar accesible desde Internet para recibir mensajes IFTTT.",
+            "one_instance_allowed": "Solo una instancia es necesaria."
+        },
+        "create_entry": {
+            "default": "Para enviar eventos a Home Assistant, deber\u00e1 usar la acci\u00f3n \"Realizar una solicitud web\" del [applet de IFTTT Webhook] ( {applet_url} ). \n\n Complete la siguiente informaci\u00f3n: \n\n - URL: ` {webhook_url} ` \n - M\u00e9todo: POST \n - Tipo de contenido: aplicaci\u00f3n / json \n\n Consulte [la documentaci\u00f3n] ( {docs_url} ) sobre c\u00f3mo configurar las automatizaciones para manejar los datos entrantes."
+        },
+        "step": {
+            "user": {
+                "description": "\u00bfEst\u00e1s seguro de que quieres configurar IFTTT?"
+            }
+        },
+        "title": "IFTTT"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/ifttt/.translations/it.json b/homeassistant/components/ifttt/.translations/it.json
index ac81f073347..e5dc76b7923 100644
--- a/homeassistant/components/ifttt/.translations/it.json
+++ b/homeassistant/components/ifttt/.translations/it.json
@@ -2,14 +2,14 @@
     "config": {
         "abort": {
             "not_internet_accessible": "Home Assistant deve essere accessibile da internet per ricevere messaggi IFTTT",
-            "one_instance_allowed": "E' necessaria una sola istanza."
+            "one_instance_allowed": "\u00c8 necessaria una sola istanza."
         },
         "create_entry": {
             "default": "Per inviare eventi a Home Assistant, dovrai utilizzare l'azione \"Esegui una richiesta web\" dall'applet [Weblet di IFTTT] ( {applet_url} ). \n\n Compila le seguenti informazioni: \n\n - URL: ` {webhook_url} ` \n - Metodo: POST \n - Tipo di contenuto: application / json \n\n Vedi [la documentazione] ( {docs_url} ) su come configurare le automazioni per gestire i dati in arrivo."
         },
         "step": {
             "user": {
-                "description": "Sei sicuro di voler impostare IFTTT?",
+                "description": "Sei sicuro di voler configurare IFTTT?",
                 "title": "Configura l'applet WebHook IFTTT"
             }
         },
diff --git a/homeassistant/components/ios/.translations/es-419.json b/homeassistant/components/ios/.translations/es-419.json
new file mode 100644
index 00000000000..38a12e7411a
--- /dev/null
+++ b/homeassistant/components/ios/.translations/es-419.json
@@ -0,0 +1,14 @@
+{
+    "config": {
+        "abort": {
+            "single_instance_allowed": "S\u00f3lo es necesaria una \u00fanica configuraci\u00f3n de Home Assistant iOS."
+        },
+        "step": {
+            "confirm": {
+                "description": "\u00bfDesea configurar el componente iOS de Home Assistant?",
+                "title": "Home Assistant iOS"
+            }
+        },
+        "title": "Home Assistant iOS"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/ios/.translations/it.json b/homeassistant/components/ios/.translations/it.json
index 3f587b7ee64..c2c5042e295 100644
--- a/homeassistant/components/ios/.translations/it.json
+++ b/homeassistant/components/ios/.translations/it.json
@@ -1,5 +1,14 @@
 {
     "config": {
+        "abort": {
+            "single_instance_allowed": "\u00c8 necessaria una sola configurazione di Home Assistant iOS."
+        },
+        "step": {
+            "confirm": {
+                "description": "Vuoi configurare il componente Home Assistant iOS?",
+                "title": "Home Assistant iOS"
+            }
+        },
         "title": "Home Assistant per iOS"
     }
 }
\ No newline at end of file
diff --git a/homeassistant/components/ipma/.translations/es-419.json b/homeassistant/components/ipma/.translations/es-419.json
new file mode 100644
index 00000000000..acb8b51a44c
--- /dev/null
+++ b/homeassistant/components/ipma/.translations/es-419.json
@@ -0,0 +1,19 @@
+{
+    "config": {
+        "error": {
+            "name_exists": "El nombre ya existe"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "latitude": "Latitud",
+                    "longitude": "Longitud",
+                    "name": "Nombre"
+                },
+                "description": "Instituto Portugu\u00eas do Mar e Atmosfera",
+                "title": "Ubicaci\u00f3n"
+            }
+        },
+        "title": "Servicio meteorol\u00f3gico portugu\u00e9s (IPMA)"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/ipma/.translations/es.json b/homeassistant/components/ipma/.translations/es.json
new file mode 100644
index 00000000000..c364ca286e3
--- /dev/null
+++ b/homeassistant/components/ipma/.translations/es.json
@@ -0,0 +1,18 @@
+{
+    "config": {
+        "error": {
+            "name_exists": "El nombre ya existe"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "latitude": "Latitud",
+                    "longitude": "Longitud",
+                    "name": "Nombre"
+                },
+                "title": "Ubicaci\u00f3n"
+            }
+        },
+        "title": "Servicio meteorol\u00f3gico portugu\u00e9s (IPMA)"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/ipma/.translations/hu.json b/homeassistant/components/ipma/.translations/hu.json
new file mode 100644
index 00000000000..62ddd85e6ef
--- /dev/null
+++ b/homeassistant/components/ipma/.translations/hu.json
@@ -0,0 +1,19 @@
+{
+    "config": {
+        "error": {
+            "name_exists": "A n\u00e9v m\u00e1r l\u00e9tezik"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "latitude": "Sz\u00e9less\u00e9g",
+                    "longitude": "Hossz\u00fas\u00e1g",
+                    "name": "N\u00e9v"
+                },
+                "description": "Portug\u00e1l Atmoszf\u00e9ra Int\u00e9zet",
+                "title": "Hely"
+            }
+        },
+        "title": "Portug\u00e1l Meteorol\u00f3giai Szolg\u00e1lat (IPMA)"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/ipma/.translations/it.json b/homeassistant/components/ipma/.translations/it.json
new file mode 100644
index 00000000000..d751d8a317f
--- /dev/null
+++ b/homeassistant/components/ipma/.translations/it.json
@@ -0,0 +1,19 @@
+{
+    "config": {
+        "error": {
+            "name_exists": "Il nome \u00e8 gi\u00e0 esistente"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "latitude": "Latitudine",
+                    "longitude": "Logitudine",
+                    "name": "Nome"
+                },
+                "description": "Instituto Portugu\u00eas do Mar e Atmosfera",
+                "title": "Localit\u00e0"
+            }
+        },
+        "title": "Servizio meteo portoghese (IPMA)"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/ipma/.translations/no.json b/homeassistant/components/ipma/.translations/no.json
new file mode 100644
index 00000000000..a24ec4904cb
--- /dev/null
+++ b/homeassistant/components/ipma/.translations/no.json
@@ -0,0 +1,17 @@
+{
+    "config": {
+        "error": {
+            "name_exists": "Navnet eksisterer allerede"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "latitude": "Breddegrad",
+                    "longitude": "Lengdegrad",
+                    "name": "Navn"
+                },
+                "title": "Plassering"
+            }
+        }
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/ipma/.translations/sl.json b/homeassistant/components/ipma/.translations/sl.json
new file mode 100644
index 00000000000..da6a1dac859
--- /dev/null
+++ b/homeassistant/components/ipma/.translations/sl.json
@@ -0,0 +1,19 @@
+{
+    "config": {
+        "error": {
+            "name_exists": "Ime \u017ee obstaja"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "latitude": "Zemljepisna \u0161irina",
+                    "longitude": "Zemljepisna dol\u017eina",
+                    "name": "Ime"
+                },
+                "description": "Instituto Portugu\u00eas do Mar e Atmosfera",
+                "title": "Lokacija"
+            }
+        },
+        "title": "Portugalska vremenska storitev (IPMA)"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/ipma/.translations/uk.json b/homeassistant/components/ipma/.translations/uk.json
new file mode 100644
index 00000000000..bb294cc5d21
--- /dev/null
+++ b/homeassistant/components/ipma/.translations/uk.json
@@ -0,0 +1,9 @@
+{
+    "config": {
+        "step": {
+            "user": {
+                "title": "\u0420\u043e\u0437\u0442\u0430\u0448\u0443\u0432\u0430\u043d\u043d\u044f"
+            }
+        }
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/lifx/.translations/es-419.json b/homeassistant/components/lifx/.translations/es-419.json
new file mode 100644
index 00000000000..905ec3ce2bf
--- /dev/null
+++ b/homeassistant/components/lifx/.translations/es-419.json
@@ -0,0 +1,15 @@
+{
+    "config": {
+        "abort": {
+            "no_devices_found": "No se han encontrado dispositivos LIFX en la red.",
+            "single_instance_allowed": "S\u00f3lo es posible una \u00fanica configuraci\u00f3n de LIFX."
+        },
+        "step": {
+            "confirm": {
+                "description": "\u00bfDesea configurar LIFX?",
+                "title": "LIFX"
+            }
+        },
+        "title": "LIFX"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/lifx/.translations/it.json b/homeassistant/components/lifx/.translations/it.json
new file mode 100644
index 00000000000..b4f940bc66b
--- /dev/null
+++ b/homeassistant/components/lifx/.translations/it.json
@@ -0,0 +1,15 @@
+{
+    "config": {
+        "abort": {
+            "no_devices_found": "Nessun dispositivo LIFX trovato in rete.",
+            "single_instance_allowed": "\u00c8 consentita solo una singola configurazione di LIFX."
+        },
+        "step": {
+            "confirm": {
+                "description": "Vuoi configurare LIFX?",
+                "title": "LIFX"
+            }
+        },
+        "title": "LIFX"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/locative/.translations/es-419.json b/homeassistant/components/locative/.translations/es-419.json
new file mode 100644
index 00000000000..8fb63ff18c7
--- /dev/null
+++ b/homeassistant/components/locative/.translations/es-419.json
@@ -0,0 +1,18 @@
+{
+    "config": {
+        "abort": {
+            "not_internet_accessible": "Su instancia de Home Assistant debe ser accesible desde Internet para recibir mensajes de Geofency.",
+            "one_instance_allowed": "Solo una instancia es necesaria."
+        },
+        "create_entry": {
+            "default": "Para enviar ubicaciones a Home Assistant, deber\u00e1 configurar la funci\u00f3n de webhook en la aplicaci\u00f3n Locative. \n\n Complete la siguiente informaci\u00f3n: \n\n - URL: ` {webhook_url} ` \n - M\u00e9todo: POST \n\n Vea [la documentaci\u00f3n] ( {docs_url} ) para m\u00e1s detalles."
+        },
+        "step": {
+            "user": {
+                "description": "\u00bfEst\u00e1 seguro de que desea configurar el Webhook Locative?",
+                "title": "Configurar el Webhook Locative"
+            }
+        },
+        "title": "Webhook Locative"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/locative/.translations/hu.json b/homeassistant/components/locative/.translations/hu.json
new file mode 100644
index 00000000000..e90910c29a2
--- /dev/null
+++ b/homeassistant/components/locative/.translations/hu.json
@@ -0,0 +1,15 @@
+{
+    "config": {
+        "abort": {
+            "not_internet_accessible": "Az Home Assistantnek el\u00e9rhet\u0151nek kell lennie az internetr\u0151l, hogy megkapja a Geofency \u00fczeneteit.",
+            "one_instance_allowed": "Csak egy p\u00e9ld\u00e1ny sz\u00fcks\u00e9ges."
+        },
+        "step": {
+            "user": {
+                "description": "Biztosan be szeretn\u00e9d be\u00e1ll\u00edtani a Locative Webhookot?",
+                "title": "Locative Webhook be\u00e1ll\u00edt\u00e1sa"
+            }
+        },
+        "title": "Locative Webhook"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/locative/.translations/it.json b/homeassistant/components/locative/.translations/it.json
new file mode 100644
index 00000000000..de62d2ac2f7
--- /dev/null
+++ b/homeassistant/components/locative/.translations/it.json
@@ -0,0 +1,18 @@
+{
+    "config": {
+        "abort": {
+            "not_internet_accessible": "La tua istanza di Home Assistant deve essere accessibile da Internet per ricevere messaggi da Geofency.",
+            "one_instance_allowed": "\u00c8 necessaria una sola istanza."
+        },
+        "create_entry": {
+            "default": "Per inviare localit\u00e0 a Home Assistant, dovrai configurare la funzionalit\u00e0 webhook nell'app Locative.\n\n Compila le seguenti informazioni: \n\n - URL: ` {webhook_url} ` \n - Method: POST \n\n Vedi [la documentazione]({docs_url}) for ulteriori dettagli."
+        },
+        "step": {
+            "user": {
+                "description": "Sei sicuro di voler configurare il webhook di Locative?",
+                "title": "Configura il webhook di Locative"
+            }
+        },
+        "title": "Webhook di Locative"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/locative/.translations/pt.json b/homeassistant/components/locative/.translations/pt.json
new file mode 100644
index 00000000000..2104ad90607
--- /dev/null
+++ b/homeassistant/components/locative/.translations/pt.json
@@ -0,0 +1,18 @@
+{
+    "config": {
+        "abort": {
+            "not_internet_accessible": "A sua inst\u00e2ncia Home Assistent precisa de ser acess\u00edvel a partir da internet para receber mensagens Geofency.",
+            "one_instance_allowed": "Apenas uma inst\u00e2ncia \u00e9 necess\u00e1ria."
+        },
+        "create_entry": {
+            "default": "Para enviar eventos para o Home Assistant, \u00e9 necess\u00e1rio configurar um webhook no Locative. \n\n Preencha as seguintes informa\u00e7\u00f5es: \n\n - URL: `{webhook_url}`\n - M\u00e9todo: POST \n\n Veja [the documentation]({docs_url}) para obter mais detalhes."
+        },
+        "step": {
+            "user": {
+                "description": "Tem certeza de que deseja configurar o Locative Webhook?",
+                "title": "Configurar o Locative Webhook"
+            }
+        },
+        "title": "Locative Webhook"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/luftdaten/.translations/es-419.json b/homeassistant/components/luftdaten/.translations/es-419.json
new file mode 100644
index 00000000000..8e81e9e52a1
--- /dev/null
+++ b/homeassistant/components/luftdaten/.translations/es-419.json
@@ -0,0 +1,19 @@
+{
+    "config": {
+        "error": {
+            "communication_error": "No se puede comunicar con la API de Luftdaten",
+            "invalid_sensor": "Sensor no disponible o no v\u00e1lido",
+            "sensor_exists": "Sensor ya registrado"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "show_on_map": "Mostrar en el mapa",
+                    "station_id": "ID del sensor de Luftdaten"
+                },
+                "title": "Definir Luftdaten"
+            }
+        },
+        "title": "Luftdaten"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/luftdaten/.translations/hu.json b/homeassistant/components/luftdaten/.translations/hu.json
index 48914a94465..b8b2b1fc0d8 100644
--- a/homeassistant/components/luftdaten/.translations/hu.json
+++ b/homeassistant/components/luftdaten/.translations/hu.json
@@ -1,7 +1,16 @@
 {
     "config": {
+        "error": {
+            "communication_error": "Nem lehet kommunik\u00e1lni a Luftdaten API-val",
+            "invalid_sensor": "Az \u00e9rz\u00e9kel\u0151 nem el\u00e9rhet\u0151 vagy \u00e9rv\u00e9nytelen",
+            "sensor_exists": "Az \u00e9rz\u00e9kel\u0151 m\u00e1r regisztr\u00e1lt"
+        },
         "step": {
             "user": {
+                "data": {
+                    "show_on_map": "Mutasd a t\u00e9rk\u00e9pen",
+                    "station_id": "Luftdaten \u00e9rz\u00e9kel\u0151 ID"
+                },
                 "title": "Luftdaten be\u00e1ll\u00edt\u00e1sa"
             }
         },
diff --git a/homeassistant/components/luftdaten/.translations/it.json b/homeassistant/components/luftdaten/.translations/it.json
new file mode 100644
index 00000000000..27951378295
--- /dev/null
+++ b/homeassistant/components/luftdaten/.translations/it.json
@@ -0,0 +1,19 @@
+{
+    "config": {
+        "error": {
+            "communication_error": "Impossibile comunicare con l'API Luftdaten",
+            "invalid_sensor": "Sensore non disponibile o non valido",
+            "sensor_exists": "Sensore gi\u00e0 registrato"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "show_on_map": "Mostra sulla mappa",
+                    "station_id": "ID del sensore Luftdaten"
+                },
+                "title": "Definisci Luftdaten"
+            }
+        },
+        "title": "Luftdaten"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/mailgun/.translations/es-419.json b/homeassistant/components/mailgun/.translations/es-419.json
new file mode 100644
index 00000000000..fd0c543241b
--- /dev/null
+++ b/homeassistant/components/mailgun/.translations/es-419.json
@@ -0,0 +1,18 @@
+{
+    "config": {
+        "abort": {
+            "not_internet_accessible": "Su instancia de Home Assistant debe ser accesible desde Internet para recibir mensajes de Mailgun.",
+            "one_instance_allowed": "Solo una instancia es necesaria."
+        },
+        "create_entry": {
+            "default": "Para enviar eventos a Home Assistant, deber\u00e1 configurar [Webhooks with Mailgun] ( {mailgun_url} ). \n\n Complete la siguiente informaci\u00f3n: \n\n - URL: ` {webhook_url} ` \n - M\u00e9todo: POST \n - Tipo de contenido: aplicaci\u00f3n / json \n\n Consulte [la documentaci\u00f3n] ( {docs_url} ) sobre c\u00f3mo configurar las automatizaciones para manejar los datos entrantes."
+        },
+        "step": {
+            "user": {
+                "description": "\u00bfEst\u00e1s seguro de que quieres configurar Mailgun?",
+                "title": "Configurar el Webhook de Mailgun"
+            }
+        },
+        "title": "Mailgun"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/mailgun/.translations/it.json b/homeassistant/components/mailgun/.translations/it.json
new file mode 100644
index 00000000000..4dea652aa3f
--- /dev/null
+++ b/homeassistant/components/mailgun/.translations/it.json
@@ -0,0 +1,18 @@
+{
+    "config": {
+        "abort": {
+            "not_internet_accessible": "La tua istanza di Home Assistant deve essere accessibile da Internet per ricevere messaggi da Mailgun.",
+            "one_instance_allowed": "\u00c8 necessaria una sola istanza."
+        },
+        "create_entry": {
+            "default": "Per inviare eventi a Home Assistant, dovrai configurare [Webhooks con Mailgun]({mailgun_url})\n\n Compila le seguenti informazioni: \n\n - URL: ` {webhook_url} ` \n - Method: POST \n - Content Type: application/json\n\n Vedi [la documentazione]({docs_url}) su come configurare le automazioni per gestire i dati in arrivo."
+        },
+        "step": {
+            "user": {
+                "description": "Sei sicuro di voler configurare Mailgun?",
+                "title": "Configura il webhook di Mailgun"
+            }
+        },
+        "title": "Mailgun"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/mqtt/.translations/es-419.json b/homeassistant/components/mqtt/.translations/es-419.json
index e9e869ae966..4f54e11a112 100644
--- a/homeassistant/components/mqtt/.translations/es-419.json
+++ b/homeassistant/components/mqtt/.translations/es-419.json
@@ -1,9 +1,31 @@
 {
     "config": {
+        "abort": {
+            "single_instance_allowed": "S\u00f3lo se permite una \u00fanica configuraci\u00f3n de MQTT."
+        },
+        "error": {
+            "cannot_connect": "No se puede conectar con el broker."
+        },
         "step": {
+            "broker": {
+                "data": {
+                    "broker": "Broker",
+                    "discovery": "Habilitar descubrimiento",
+                    "password": "Contrase\u00f1a",
+                    "port": "Puerto",
+                    "username": "Nombre de usuario"
+                },
+                "description": "Por favor ingrese la informaci\u00f3n de conexi\u00f3n de su agente MQTT.",
+                "title": "MQTT"
+            },
             "hassio_confirm": {
+                "data": {
+                    "discovery": "Habilitar descubrimiento"
+                },
+                "description": "\u00bfDesea configurar el Asistente del Hogar para que se conecte al broker MQTT proporcionado por el complemento hass.io {addon}?",
                 "title": "MQTT Broker a trav\u00e9s del complemento Hass.io"
             }
-        }
+        },
+        "title": "MQTT"
     }
 }
\ No newline at end of file
diff --git a/homeassistant/components/mqtt/.translations/hu.json b/homeassistant/components/mqtt/.translations/hu.json
index f08c601633e..26361b0e363 100644
--- a/homeassistant/components/mqtt/.translations/hu.json
+++ b/homeassistant/components/mqtt/.translations/hu.json
@@ -22,7 +22,8 @@
                 "data": {
                     "discovery": "Felfedez\u00e9s enged\u00e9lyez\u00e9se"
                 },
-                "description": "Szeretn\u00e9d, hogy a Home Assistant csatlakozzon a hass.io addon {addon} \u00e1ltal biztos\u00edtott MQTT br\u00f3kerhez?"
+                "description": "Szeretn\u00e9d, hogy a Home Assistant csatlakozzon a hass.io addon {addon} \u00e1ltal biztos\u00edtott MQTT br\u00f3kerhez?",
+                "title": "MQTT Broker a Hass.io b\u0151v\u00edtm\u00e9nyen kereszt\u00fcl"
             }
         },
         "title": "MQTT"
diff --git a/homeassistant/components/mqtt/.translations/it.json b/homeassistant/components/mqtt/.translations/it.json
index e56860cd675..ed33b182a96 100644
--- a/homeassistant/components/mqtt/.translations/it.json
+++ b/homeassistant/components/mqtt/.translations/it.json
@@ -10,13 +10,20 @@
             "broker": {
                 "data": {
                     "broker": "Broker",
-                    "discovery": "Attiva l'individuazione"
-                }
+                    "discovery": "Attiva l'individuazione",
+                    "password": "Password",
+                    "port": "Porta",
+                    "username": "Nome utente"
+                },
+                "description": "Inserisci le informazioni di connessione del tuo broker MQTT.",
+                "title": "MQTT"
             },
             "hassio_confirm": {
                 "data": {
                     "discovery": "Attiva l'individuazione"
-                }
+                },
+                "description": "Vuoi configurare Home Assistant per connettersi al broker MQTT fornito dall'add-on di Hass.io {addon}?",
+                "title": "Broker MQTT tramite l'add-on di Hass.io"
             }
         },
         "title": "MQTT"
diff --git a/homeassistant/components/nest/.translations/es-419.json b/homeassistant/components/nest/.translations/es-419.json
index 0dfb5283d8f..117a4500d58 100644
--- a/homeassistant/components/nest/.translations/es-419.json
+++ b/homeassistant/components/nest/.translations/es-419.json
@@ -1,6 +1,7 @@
 {
     "config": {
         "abort": {
+            "already_setup": "Solo puedes configurar una sola cuenta Nest.",
             "no_flows": "Debe configurar Nest antes de poder autenticarse con \u00e9l. [Lea las instrucciones] (https://www.home-assistant.io/components/nest/)."
         },
         "error": {
diff --git a/homeassistant/components/nest/.translations/hu.json b/homeassistant/components/nest/.translations/hu.json
index e24c38f8608..dc26862f5ea 100644
--- a/homeassistant/components/nest/.translations/hu.json
+++ b/homeassistant/components/nest/.translations/hu.json
@@ -23,6 +23,7 @@
                 "data": {
                     "code": "PIN-k\u00f3d"
                 },
+                "description": "A Nest-fi\u00f3k \u00f6sszekapcsol\u00e1s\u00e1hoz [enged\u00e9lyezze fi\u00f3kj\u00e1t] ( {url} ). \n\n Az enged\u00e9lyez\u00e9s ut\u00e1n m\u00e1solja be az al\u00e1bbi PIN k\u00f3dot.",
                 "title": "Nest fi\u00f3k \u00f6sszekapcsol\u00e1sa"
             }
         },
diff --git a/homeassistant/components/nest/.translations/it.json b/homeassistant/components/nest/.translations/it.json
index e4a19ebd521..b55c6d00683 100644
--- a/homeassistant/components/nest/.translations/it.json
+++ b/homeassistant/components/nest/.translations/it.json
@@ -2,7 +2,7 @@
     "config": {
         "abort": {
             "already_setup": "\u00c8 possibile configurare un solo account Nest.",
-            "authorize_url_fail": "Errore sconoscioto nel generare l'url di autorizzazione",
+            "authorize_url_fail": "Errore sconosciuto nel generare l'url di autorizzazione",
             "authorize_url_timeout": "Tempo scaduto nel generare l'url di autorizzazione",
             "no_flows": "Devi configurare Nest prima di poter eseguire l'autenticazione. [Si prega di leggere le istruzioni] (https://www.home-assistant.io/components/nest/)."
         },
diff --git a/homeassistant/components/openuv/.translations/es-419.json b/homeassistant/components/openuv/.translations/es-419.json
index 6b391c20a0a..332a21f99f5 100644
--- a/homeassistant/components/openuv/.translations/es-419.json
+++ b/homeassistant/components/openuv/.translations/es-419.json
@@ -7,11 +7,14 @@
         "step": {
             "user": {
                 "data": {
+                    "api_key": "Clave API de OpenUV",
                     "elevation": "Elevaci\u00f3n",
                     "latitude": "Latitud",
                     "longitude": "Longitud"
-                }
+                },
+                "title": "Completa tu informaci\u00f3n"
             }
-        }
+        },
+        "title": "OpenUV"
     }
 }
\ No newline at end of file
diff --git a/homeassistant/components/openuv/.translations/it.json b/homeassistant/components/openuv/.translations/it.json
index a18d36693d5..82dfd63184a 100644
--- a/homeassistant/components/openuv/.translations/it.json
+++ b/homeassistant/components/openuv/.translations/it.json
@@ -1,15 +1,20 @@
 {
     "config": {
         "error": {
+            "identifier_exists": "Coordinate gi\u00e0 registrate",
             "invalid_api_key": "Chiave API non valida"
         },
         "step": {
             "user": {
                 "data": {
+                    "api_key": "API Key di OpenUV",
+                    "elevation": "Altitudine",
                     "latitude": "Latitudine",
                     "longitude": "Logitudine"
-                }
+                },
+                "title": "Inserisci i tuoi dati"
             }
-        }
+        },
+        "title": "OpenUV"
     }
 }
\ No newline at end of file
diff --git a/homeassistant/components/owntracks/.translations/es-419.json b/homeassistant/components/owntracks/.translations/es-419.json
new file mode 100644
index 00000000000..f56cff977d0
--- /dev/null
+++ b/homeassistant/components/owntracks/.translations/es-419.json
@@ -0,0 +1,17 @@
+{
+    "config": {
+        "abort": {
+            "one_instance_allowed": "Solo una instancia es necesaria."
+        },
+        "create_entry": {
+            "default": "\n\n En Android, abra [la aplicaci\u00f3n OwnTracks] ( {android_url} ), vaya a preferencias - > conexi\u00f3n. Cambia las siguientes configuraciones: \n - Modo: HTTP privado \n - Anfitri\u00f3n: {webhook_url} \n - Identificaci\u00f3n: \n - Nombre de usuario: ` <Your name> ` \n - ID del dispositivo: ` <Your device name> ` \n\n En iOS, abra [la aplicaci\u00f3n OwnTracks] ( {ios_url} ), toque el icono (i) en la parte superior izquierda - > configuraci\u00f3n. Cambia las siguientes configuraciones: \n - Modo: HTTP \n - URL: {webhook_url} \n - Activar autenticaci\u00f3n \n - ID de usuario: ` <Your name> ` \n\n {secret} \n \n Consulte [la documentaci\u00f3n] ( {docs_url} ) para obtener m\u00e1s informaci\u00f3n."
+        },
+        "step": {
+            "user": {
+                "description": "\u00bfEst\u00e1s seguro de que quieres configurar OwnTracks?",
+                "title": "Configurar OwnTracks"
+            }
+        },
+        "title": "OwnTracks"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/owntracks/.translations/it.json b/homeassistant/components/owntracks/.translations/it.json
new file mode 100644
index 00000000000..9b66b693c33
--- /dev/null
+++ b/homeassistant/components/owntracks/.translations/it.json
@@ -0,0 +1,14 @@
+{
+    "config": {
+        "abort": {
+            "one_instance_allowed": "\u00c8 necessaria una sola istanza."
+        },
+        "step": {
+            "user": {
+                "description": "Sei sicuro di voler configurare OwnTracks?",
+                "title": "Configura OwnTracks"
+            }
+        },
+        "title": "OwnTracks"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/point/.translations/es-419.json b/homeassistant/components/point/.translations/es-419.json
new file mode 100644
index 00000000000..c20e3350272
--- /dev/null
+++ b/homeassistant/components/point/.translations/es-419.json
@@ -0,0 +1,24 @@
+{
+    "config": {
+        "abort": {
+            "external_setup": "Punto configurado con \u00e9xito desde otro flujo."
+        },
+        "error": {
+            "follow_link": "Por favor, siga el enlace y autent\u00edquese antes de presionar Enviar",
+            "no_token": "No autenticado con Minut"
+        },
+        "step": {
+            "auth": {
+                "description": "Siga el enlace a continuaci\u00f3n y <b> Aceptar </b> acceso a su cuenta de Minut, luego vuelva y presione <b> Enviar </b> continuaci\u00f3n. \n\n [Enlace] ( {authorization_url} )"
+            },
+            "user": {
+                "data": {
+                    "flow_impl": "Proveedor"
+                },
+                "description": "Elija a trav\u00e9s de qu\u00e9 proveedor de autenticaci\u00f3n desea autenticarse con Point.",
+                "title": "Proveedor de autenticaci\u00f3n"
+            }
+        },
+        "title": "Minut Point"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/point/.translations/hu.json b/homeassistant/components/point/.translations/hu.json
index 2d52069d5ba..3192454550d 100644
--- a/homeassistant/components/point/.translations/hu.json
+++ b/homeassistant/components/point/.translations/hu.json
@@ -1,7 +1,16 @@
 {
     "config": {
+        "abort": {
+            "authorize_url_fail": "Ismeretlen hiba t\u00f6rt\u00e9nt a hiteles\u00edt\u00e9si link gener\u00e1l\u00e1sa sor\u00e1n.",
+            "authorize_url_timeout": "Id\u0151t\u00fall\u00e9p\u00e9s az \u00e9rv\u00e9nyes\u00edt\u00e9si url gener\u00e1l\u00e1sa sor\u00e1n."
+        },
+        "error": {
+            "follow_link": "K\u00e9rlek, k\u00f6vesd a hivatkoz\u00e1st \u00e9s hiteles\u00edtsd magad miel\u0151tt megnyomod a K\u00fcld\u00e9s gombot",
+            "no_token": "A Minut nincs hiteles\u00edtve"
+        },
         "step": {
             "auth": {
+                "description": "K\u00e9rlek k\u00f6vesd az al\u00e1bbi linket \u00e9s a <b> Fogadd el </b> a hozz\u00e1f\u00e9r\u00e9st a Minut fi\u00f3kj\u00e1hoz, majd t\u00e9rj vissza \u00e9s nyomd meg a <b> K\u00fcld\u00e9s </b> gombot. \n\n [Link] ( {authorization_url} )",
                 "title": "Point hiteles\u00edt\u00e9se"
             },
             "user": {
diff --git a/homeassistant/components/point/.translations/it.json b/homeassistant/components/point/.translations/it.json
index 00e2cb02358..324801009ca 100644
--- a/homeassistant/components/point/.translations/it.json
+++ b/homeassistant/components/point/.translations/it.json
@@ -1,12 +1,31 @@
 {
     "config": {
+        "abort": {
+            "already_setup": "\u00c8 possibile configurare un solo account Point.",
+            "authorize_url_fail": "Errore sconosciuto nel generare l'url di autorizzazione",
+            "authorize_url_timeout": "Tempo scaduto nel generare l'url di autorizzazione",
+            "external_setup": "Point configurato correttamente da un altro flusso.",
+            "no_flows": "Devi configurare Point prima di poter eseguire l'autenticazione. [Si prega di leggere le istruzioni] (https://www.home-assistant.io/components/point/)."
+        },
+        "create_entry": {
+            "default": "Autenticato con successo con Minut per i tuoi dispositivi Point"
+        },
+        "error": {
+            "follow_link": "Segui il link e autenticati prima di premere Invio",
+            "no_token": "Non autenticato con Minut"
+        },
         "step": {
+            "auth": {
+                "title": "Autenticare Point"
+            },
             "user": {
                 "data": {
                     "flow_impl": "Provider"
                 },
+                "description": "Scegli tramite quale provider di autenticazione vuoi autenticarti con Point.",
                 "title": "Provider di autenticazione"
             }
-        }
+        },
+        "title": "Minut Point"
     }
 }
\ No newline at end of file
diff --git a/homeassistant/components/ps4/.translations/ca.json b/homeassistant/components/ps4/.translations/ca.json
new file mode 100644
index 00000000000..350b65ca815
--- /dev/null
+++ b/homeassistant/components/ps4/.translations/ca.json
@@ -0,0 +1,32 @@
+{
+    "config": {
+        "abort": {
+            "credential_error": "Error en l'obtenci\u00f3 de les credencials.",
+            "devices_configured": "Tots els dispositius trobats ja estan configurats.",
+            "no_devices_found": "No s'han trobat dispositius PlayStation 4 a la xarxa.",
+            "port_987_bind_error": "No s'ha pogut vincular amb el port 987.",
+            "port_997_bind_error": "No s'ha pogut vincular amb el port 997."
+        },
+        "error": {
+            "login_failed": "No s'ha pogut sincronitzar amb la PlayStation 4. Verifica el codi PIN.",
+            "not_ready": "La PlayStation 4 no est\u00e0 engegada o no s'ha connectada a la xarxa."
+        },
+        "step": {
+            "creds": {
+                "description": "Credencials necess\u00e0ries. Prem 'Enviar' i, a continuaci\u00f3, a la segona pantalla de l'aplicaci\u00f3 de la PS4, actualitza els dispositius i selecciona 'Home-Assistant' per continuar.",
+                "title": "PlayStation 4"
+            },
+            "link": {
+                "data": {
+                    "code": "PIN",
+                    "ip_address": "Adre\u00e7a IP",
+                    "name": "Nom",
+                    "region": "Regi\u00f3"
+                },
+                "description": "Introdueix la informaci\u00f3 de la teva PlayStation 4. Pel 'PIN', ves a 'Configuraci\u00f3' de la PlayStation 4, despr\u00e9s navega fins a 'Configuraci\u00f3 de la connexi\u00f3 de l'aplicaci\u00f3 m\u00f2bil' i selecciona 'Afegir dispositiu'. Introdueix el PIN que es mostra.",
+                "title": "PlayStation 4"
+            }
+        },
+        "title": "PlayStation 4"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/ps4/.translations/cs.json b/homeassistant/components/ps4/.translations/cs.json
new file mode 100644
index 00000000000..5c4e67a324c
--- /dev/null
+++ b/homeassistant/components/ps4/.translations/cs.json
@@ -0,0 +1,13 @@
+{
+    "config": {
+        "step": {
+            "link": {
+                "data": {
+                    "region": "Region"
+                },
+                "title": "PlayStation 4"
+            }
+        },
+        "title": "PlayStation 4"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/ps4/.translations/da.json b/homeassistant/components/ps4/.translations/da.json
new file mode 100644
index 00000000000..7c5f9e7621c
--- /dev/null
+++ b/homeassistant/components/ps4/.translations/da.json
@@ -0,0 +1,32 @@
+{
+    "config": {
+        "abort": {
+            "credential_error": "Fejl ved hentning af legitimationsoplysninger.",
+            "devices_configured": "Alle de fundne enheder er allerede konfigureret.",
+            "no_devices_found": "Ingen PlayStation 4 enheder fundet p\u00e5 netv\u00e6rket.",
+            "port_987_bind_error": "Kunne ikke binde til port 987.",
+            "port_997_bind_error": "Kunne ikke binde til port 997."
+        },
+        "error": {
+            "login_failed": "Kunne ikke parre med PlayStation 4. Kontroller PIN er korrekt.",
+            "not_ready": "PlayStation 4 er ikke t\u00e6ndt eller tilsluttet til netv\u00e6rket."
+        },
+        "step": {
+            "creds": {
+                "description": "Legitimationsoplysninger er n\u00f8dvendige. Tryk p\u00e5 'Send' og derefter i PS4 2nd Screen App, v\u00e6lg opdater enheder og v\u00e6lg 'Home-Assistant' -enheden for at forts\u00e6tte.",
+                "title": "PlayStation 4"
+            },
+            "link": {
+                "data": {
+                    "code": "PIN",
+                    "ip_address": "IP-adresse",
+                    "name": "Navn",
+                    "region": "Omr\u00e5de"
+                },
+                "description": "Indtast dine PlayStation 4 oplysninger. For 'PIN' skal du navigere til 'Indstillinger' p\u00e5 din PlayStation 4 konsol. G\u00e5 derefter til 'Indstillinger for mobilapp-forbindelse' og v\u00e6lg 'Tilf\u00f8j enhed'. Indtast den PIN der vises.",
+                "title": "PlayStation 4"
+            }
+        },
+        "title": "PlayStation 4"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/ps4/.translations/en.json b/homeassistant/components/ps4/.translations/en.json
index b546280a7ce..c0b476ff4e2 100644
--- a/homeassistant/components/ps4/.translations/en.json
+++ b/homeassistant/components/ps4/.translations/en.json
@@ -1,32 +1,32 @@
 {
-  "config": {
-    "title": "PlayStation 4",
-    "step": {
-      "creds": {
-        "title": "PlayStation 4",
-        "description": "Credentials needed. Press 'Submit' and then in the PS4 2nd Screen App, refresh devices and select the 'Home-Assistant' device to continue."
-      },
-      "link": {
-        "title": "PlayStation 4",
-        "description": "Enter your PlayStation 4 information. For 'PIN', navigate to 'Settings' on your PlayStation 4 console. Then navigate to 'Mobile App Connection Settings' and select 'Add Device'. Enter the PIN that is displayed.",
-        "data": {
-          "region": "Region",
-          "name": "Name",
-          "code": "PIN",
-          "ip_address": "IP Address"
-        }
-      }
-    },
-    "error": {
-      "not_ready": "PlayStation 4 is not on or connected to network.",
-      "login_failed": "Failed to pair to PlayStation 4. Verify PIN is correct."
-    },
-    "abort": {
-      "credential_error": "Error fetching credentials.",
-      "no_devices_found": "No PlayStation 4 devices found on the network.",
-      "devices_configured": "All devices found are already configured.", 
-      "port_987_bind_error": "Could not bind to UDP port 987. Port in use or additional configuration required. See component documentation at: https://home-assistant.io/components/media_player.ps4/",
-      "port_997_bind_error": "Could not bind to TCP port 997. Port in use or additional configuration required. See component documentation at: https://home-assistant.io/components/media_player.ps4/"
+    "config": {
+        "abort": {
+            "credential_error": "Error fetching credentials.",
+            "devices_configured": "All devices found are already configured.",
+            "no_devices_found": "No PlayStation 4 devices found on the network.",
+            "port_987_bind_error": "Could not bind to port 987.",
+            "port_997_bind_error": "Could not bind to port 997."
+        },
+        "error": {
+            "login_failed": "Failed to pair to PlayStation 4. Verify PIN is correct.",
+            "not_ready": "PlayStation 4 is not on or connected to network."
+        },
+        "step": {
+            "creds": {
+                "description": "Credentials needed. Press 'Submit' and then in the PS4 2nd Screen App, refresh devices and select the 'Home-Assistant' device to continue.",
+                "title": "PlayStation 4"
+            },
+            "link": {
+                "data": {
+                    "code": "PIN",
+                    "ip_address": "IP Address",
+                    "name": "Name",
+                    "region": "Region"
+                },
+                "description": "Enter your PlayStation 4 information. For 'PIN', navigate to 'Settings' on your PlayStation 4 console. Then navigate to 'Mobile App Connection Settings' and select 'Add Device'. Enter the PIN that is displayed.",
+                "title": "PlayStation 4"
+            }
+        },
+        "title": "PlayStation 4"
     }
-  }
-}
+}
\ No newline at end of file
diff --git a/homeassistant/components/ps4/.translations/es-419.json b/homeassistant/components/ps4/.translations/es-419.json
new file mode 100644
index 00000000000..093ee552951
--- /dev/null
+++ b/homeassistant/components/ps4/.translations/es-419.json
@@ -0,0 +1,32 @@
+{
+    "config": {
+        "abort": {
+            "credential_error": "Error al obtener las credenciales.",
+            "devices_configured": "Todos los dispositivos encontrados ya est\u00e1n configurados.",
+            "no_devices_found": "No se encontraron dispositivos PlayStation 4 en la red.",
+            "port_987_bind_error": "No se pudo enlazar al puerto 987.",
+            "port_997_bind_error": "No se pudo enlazar al puerto 997."
+        },
+        "error": {
+            "login_failed": "No se ha podido emparejar con PlayStation 4. Verifique que el PIN sea correcto.",
+            "not_ready": "PlayStation 4 no est\u00e1 encendida o conectada a la red."
+        },
+        "step": {
+            "creds": {
+                "description": "Credenciales necesarias. Presione 'Enviar' y luego en la aplicaci\u00f3n de la segunda pantalla de PS4, actualice los dispositivos y seleccione el dispositivo 'Home-Assistant' para continuar.",
+                "title": "Playstation 4"
+            },
+            "link": {
+                "data": {
+                    "code": "PIN",
+                    "ip_address": "Direcci\u00f3n IP",
+                    "name": "Nombre",
+                    "region": "Regi\u00f3n"
+                },
+                "description": "Ingresa tu informaci\u00f3n de PlayStation 4. Para 'PIN', navegue hasta 'Configuraci\u00f3n' en su consola PlayStation 4. Luego navegue a 'Configuraci\u00f3n de conexi\u00f3n de la aplicaci\u00f3n m\u00f3vil' y seleccione 'Agregar dispositivo'. Ingrese el PIN que se muestra.",
+                "title": "Playstation 4"
+            }
+        },
+        "title": "Playstation 4"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/ps4/.translations/it.json b/homeassistant/components/ps4/.translations/it.json
new file mode 100644
index 00000000000..5e83d7bd39c
--- /dev/null
+++ b/homeassistant/components/ps4/.translations/it.json
@@ -0,0 +1,32 @@
+{
+    "config": {
+        "abort": {
+            "credential_error": "Errore nel recupero delle credenziali.",
+            "devices_configured": "Tutti i dispositivi trovati sono gi\u00e0 configurati.",
+            "no_devices_found": "Nessun dispositivo PlayStation 4 trovato in rete.",
+            "port_987_bind_error": "Impossibile connettersi alla porta 987.",
+            "port_997_bind_error": "Impossibile connettersi alla porta 997."
+        },
+        "error": {
+            "login_failed": "Accoppiamento alla PlayStation 4 fallito. Verifica che il PIN sia corretto.",
+            "not_ready": "La PlayStation 4 non \u00e8 accesa o non \u00e8 collegata alla rete."
+        },
+        "step": {
+            "creds": {
+                "description": "Credenziali necessarie. Premi 'Invia' e poi, nella seconda schermata della App PS4, aggiorna i dispositivi e seleziona il dispositivo 'Home-Assistant' per continuare.",
+                "title": "PlayStation 4"
+            },
+            "link": {
+                "data": {
+                    "code": "PIN",
+                    "ip_address": "Indirizzo IP",
+                    "name": "Nome",
+                    "region": "Area geografica"
+                },
+                "description": "Inserisci le informazioni  della tua PlayStation 4. Per il \"PIN\", vai su \"Impostazioni\" sulla tua console PlayStation 4. Quindi accedi a \"Impostazioni connessione app mobile\" e seleziona \"Aggiungi dispositivo\". Inserisci il PIN che viene visualizzato.",
+                "title": "PlayStation 4"
+            }
+        },
+        "title": "PlayStation 4"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/ps4/.translations/ko.json b/homeassistant/components/ps4/.translations/ko.json
new file mode 100644
index 00000000000..019fbef1ef3
--- /dev/null
+++ b/homeassistant/components/ps4/.translations/ko.json
@@ -0,0 +1,32 @@
+{
+    "config": {
+        "abort": {
+            "credential_error": "\uc790\uaca9 \uc99d\uba85\uc744 \uac00\uc838\uc624\ub294 \uc911 \uc624\ub958\uac00 \ubc1c\uc0dd\ud588\uc2b5\ub2c8\ub2e4.",
+            "devices_configured": "\ubc1c\uacac \ub41c \ubaa8\ub4e0 \uae30\uae30\ub294 \uc774\ubbf8 \uad6c\uc131\ub418\uc5c8\uc2b5\ub2c8\ub2e4.",
+            "no_devices_found": "PlayStation 4 \uae30\uae30\uac00 \ub124\ud2b8\uc6cc\ud06c\uc5d0\uc11c \ubc1c\uacac\ub418\uc9c0 \uc54a\uc558\uc2b5\ub2c8\ub2e4.",
+            "port_987_bind_error": "\ud3ec\ud2b8 987 \uc5d0 \ubc14\uc778\ub529 \ud560 \uc218 \uc5c6\uc2b5\ub2c8\ub2e4.",
+            "port_997_bind_error": "\ud3ec\ud2b8 997 \uc5d0 \ubc14\uc778\ub529 \ud560 \uc218 \uc5c6\uc2b5\ub2c8\ub2e4."
+        },
+        "error": {
+            "login_failed": "PlayStation 4 \uc640 \ud398\uc5b4\ub9c1\ud558\uc9c0 \ubabb\ud588\uc2b5\ub2c8\ub2e4. PIN \uc774 \uc62c\ubc14\ub978\uc9c0 \ud655\uc778\ud574\uc8fc\uc138\uc694.",
+            "not_ready": "PlayStation 4 \uac00 \ucf1c\uc838 \uc788\uc9c0 \uc54a\uac70\ub098 \ub124\ud2b8\uc6cc\ud06c\uc5d0 \uc5f0\uacb0\ub418\uc5b4 \uc788\uc9c0 \uc54a\uc2b5\ub2c8\ub2e4."
+        },
+        "step": {
+            "creds": {
+                "description": "\uc790\uaca9 \uc99d\uba85\uc774 \ud544\uc694\ud569\ub2c8\ub2e4. 'Submit' \uc744 \ub204\ub978 \ub2e4\uc74c PS4 Second Screen \uc571\uc5d0\uc11c \uae30\uae30\ub97c \uc0c8\ub85c \uace0\uce68\ud558\uace0 'Home-Assistant' \uae30\uae30\ub97c \uc120\ud0dd\ud574\uc8fc\uc138\uc694.",
+                "title": "PlayStation 4"
+            },
+            "link": {
+                "data": {
+                    "code": "PIN",
+                    "ip_address": "IP \uc8fc\uc18c",
+                    "name": "\uc774\ub984",
+                    "region": "\uc9c0\uc5ed"
+                },
+                "description": "PlayStation 4 \uc815\ubcf4\ub97c \uc785\ub825\ud574\uc8fc\uc138\uc694. 'PIN' \uc744 \ud655\uc778\ud558\ub824\uba74, PlayStation 4 \ucf58\uc194\uc5d0\uc11c '\uc124\uc815' \uc73c\ub85c \uc774\ub3d9\ud55c \ub4a4 '\ubaa8\ubc14\uc77c \uc571 \uc5f0\uacb0 \uc124\uc815'\uc73c\ub85c \uc774\ub3d9\ud558\uc5ec '\uae30\uae30 \ucd94\uac00'\ub97c \uc120\ud0dd\ud574\uc8fc\uc138\uc694. \ud45c\uc2dc\ub41c PIN\uc744 \uc785\ub825\ud574\uc8fc\uc138\uc694.",
+                "title": "PlayStation 4"
+            }
+        },
+        "title": "PlayStation 4"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/ps4/.translations/lb.json b/homeassistant/components/ps4/.translations/lb.json
new file mode 100644
index 00000000000..15b90cb6b6b
--- /dev/null
+++ b/homeassistant/components/ps4/.translations/lb.json
@@ -0,0 +1,32 @@
+{
+    "config": {
+        "abort": {
+            "credential_error": "Feeler beim ausliesen vun den Umeldungs Informatiounen.",
+            "devices_configured": "All Apparater sinn schonn konfigur\u00e9iert",
+            "no_devices_found": "Keng Playstation 4 am Netzwierk fonnt.",
+            "port_987_bind_error": "Konnt sech net mam Port 987 verbannen.",
+            "port_997_bind_error": "Konnt sech net mam Port 997 verbannen."
+        },
+        "error": {
+            "login_failed": "Feeler beim verbanne mat der Playstation 4. Iwwerpr\u00e9ift op de PIN korrekt ass.",
+            "not_ready": "PlayStation 4 ass net un oder mam Netzwierk verbonnen."
+        },
+        "step": {
+            "creds": {
+                "description": "Umeldungsinformatioun sinn n\u00e9ideg. Dr\u00e9ckt op 'Ofsch\u00e9cken' , dann an der PS4 App, 2ten Ecran, erneiert Apparater an wielt den Home-Assistant Apparat aus fir weider ze fueren.",
+                "title": "PlayStation 4"
+            },
+            "link": {
+                "data": {
+                    "code": "PIN",
+                    "ip_address": "IP Adresse",
+                    "name": "Numm",
+                    "region": "Regioun"
+                },
+                "description": "Gitt \u00e4r Playstation 4 Informatiounen an. Fir 'PIN', gitt an d'Astellunge vun der Playstation 4 Konsole. Dann op 'Mobile App Verbindungs Astellungen' a wielt \"Apparat dob\u00e4isetzen' aus. Gitt de PIN an deen ugewise g\u00ebtt.",
+                "title": "PlayStation 4"
+            }
+        },
+        "title": "PlayStation 4"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/ps4/.translations/pl.json b/homeassistant/components/ps4/.translations/pl.json
new file mode 100644
index 00000000000..eea4eda0810
--- /dev/null
+++ b/homeassistant/components/ps4/.translations/pl.json
@@ -0,0 +1,32 @@
+{
+    "config": {
+        "abort": {
+            "credential_error": "B\u0142\u0105d podczas pobierania danych logowania.",
+            "devices_configured": "Wszystkie znalezione urz\u0105dzenia s\u0105 ju\u017c skonfigurowane.",
+            "no_devices_found": "W sieci nie znaleziono urz\u0105dze\u0144 PlayStation 4.",
+            "port_987_bind_error": "Nie mo\u017cna powi\u0105za\u0107 z portem 987.",
+            "port_997_bind_error": "Nie mo\u017cna powi\u0105za\u0107 z portem 997."
+        },
+        "error": {
+            "login_failed": "Nie uda\u0142o si\u0119 sparowa\u0107 z PlayStation 4. Sprawd\u017a, czy PIN jest poprawny.",
+            "not_ready": "PlayStation 4 nie jest w\u0142\u0105czona lub po\u0142\u0105czona z sieci\u0105."
+        },
+        "step": {
+            "creds": {
+                "description": "Wymagane s\u0105 po\u015bwiadczenia. Naci\u015bnij przycisk 'Prze\u015blij', a nast\u0119pnie w aplikacji PS4 Second Screen, od\u015bwie\u017c urz\u0105dzenia i wybierz urz\u0105dzenie 'Home-Assistant', aby kontynuowa\u0107.",
+                "title": "PlayStation 4"
+            },
+            "link": {
+                "data": {
+                    "code": "PIN",
+                    "ip_address": "Adres IP",
+                    "name": "Nazwa",
+                    "region": "Region"
+                },
+                "description": "Wprowad\u017a informacje o PlayStation 4. Aby uzyska\u0107 'PIN', przejd\u017a do 'Ustawienia' na konsoli PlayStation 4. Nast\u0119pnie przejd\u017a do 'Ustawienia po\u0142\u0105czenia aplikacji mobilnej' i wybierz 'Dodaj urz\u0105dzenie'. Wprowad\u017a wy\u015bwietlony kod PIN.",
+                "title": "PlayStation 4"
+            }
+        },
+        "title": "PlayStation 4"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/ps4/.translations/pt.json b/homeassistant/components/ps4/.translations/pt.json
new file mode 100644
index 00000000000..34a5ebfc4db
--- /dev/null
+++ b/homeassistant/components/ps4/.translations/pt.json
@@ -0,0 +1,18 @@
+{
+    "config": {
+        "step": {
+            "creds": {
+                "title": "PlayStation 4"
+            },
+            "link": {
+                "data": {
+                    "code": "PIN",
+                    "name": "Nome",
+                    "region": "Regi\u00e3o"
+                },
+                "title": "PlayStation 4"
+            }
+        },
+        "title": "PlayStation 4"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/ps4/.translations/ru.json b/homeassistant/components/ps4/.translations/ru.json
new file mode 100644
index 00000000000..41232ddc2d4
--- /dev/null
+++ b/homeassistant/components/ps4/.translations/ru.json
@@ -0,0 +1,32 @@
+{
+    "config": {
+        "abort": {
+            "credential_error": "\u041e\u0448\u0438\u0431\u043a\u0430 \u043f\u0440\u0438 \u043f\u043e\u043b\u0443\u0447\u0435\u043d\u0438\u0438 \u0443\u0447\u0435\u0442\u043d\u044b\u0445 \u0434\u0430\u043d\u043d\u044b\u0445.",
+            "devices_configured": "\u0412\u0441\u0435 \u043d\u0430\u0439\u0434\u0435\u043d\u043d\u044b\u0435 \u0443\u0441\u0442\u0440\u043e\u0439\u0441\u0442\u0432\u0430 \u0443\u0436\u0435 \u043d\u0430\u0441\u0442\u0440\u043e\u0435\u043d\u044b.",
+            "no_devices_found": "\u0412 \u0441\u0435\u0442\u0438 \u043d\u0435 \u043d\u0430\u0439\u0434\u0435\u043d\u043e \u0443\u0441\u0442\u0440\u043e\u0439\u0441\u0442\u0432 PlayStation 4.",
+            "port_987_bind_error": "\u041d\u0435 \u0443\u0434\u0430\u043b\u043e\u0441\u044c \u043f\u043e\u0434\u043a\u043b\u044e\u0447\u0438\u0442\u044c\u0441\u044f \u043a \u043f\u043e\u0440\u0442\u0443 987.",
+            "port_997_bind_error": "\u041d\u0435 \u0443\u0434\u0430\u043b\u043e\u0441\u044c \u043f\u043e\u0434\u043a\u043b\u044e\u0447\u0438\u0442\u044c\u0441\u044f \u043a \u043f\u043e\u0440\u0442\u0443 997."
+        },
+        "error": {
+            "login_failed": "\u041d\u0435 \u0443\u0434\u0430\u043b\u043e\u0441\u044c \u0432\u044b\u043f\u043e\u043b\u043d\u0438\u0442\u044c \u0441\u043e\u043f\u0440\u044f\u0436\u0435\u043d\u0438\u0435 \u0441 PlayStation 4. \u0423\u0431\u0435\u0434\u0438\u0442\u0435\u0441\u044c, \u0447\u0442\u043e PIN-\u043a\u043e\u0434 \u043f\u0440\u0430\u0432\u0438\u043b\u044c\u043d\u044b\u0439.",
+            "not_ready": "PlayStation 4 \u043d\u0435 \u0432\u043a\u043b\u044e\u0447\u0435\u043d\u0430 \u0438\u043b\u0438 \u043d\u0435 \u043f\u043e\u0434\u043a\u043b\u044e\u0447\u0435\u043d\u0430 \u043a \u0441\u0435\u0442\u0438."
+        },
+        "step": {
+            "creds": {
+                "description": "\u041d\u0430\u0436\u043c\u0438\u0442\u0435 **\u041f\u041e\u0414\u0422\u0412\u0415\u0420\u0414\u0418\u0422\u042c**, \u0430 \u0437\u0430\u0442\u0435\u043c \u0432 \u043f\u0440\u0438\u043b\u043e\u0436\u0435\u043d\u0438\u0438 'PS4 Second Screen' \u043e\u0431\u043d\u043e\u0432\u0438\u0442\u0435 \u0443\u0441\u0442\u0440\u043e\u0439\u0441\u0442\u0432\u0430 \u0438 \u0432\u044b\u0431\u0435\u0440\u0438\u0442\u0435 \u0443\u0441\u0442\u0440\u043e\u0439\u0441\u0442\u0432\u043e 'Home-Assistant', \u0447\u0442\u043e\u0431\u044b \u043f\u0440\u043e\u0434\u043e\u043b\u0436\u0438\u0442\u044c.",
+                "title": "PlayStation 4"
+            },
+            "link": {
+                "data": {
+                    "code": "PIN-\u043a\u043e\u0434",
+                    "ip_address": "IP-\u0430\u0434\u0440\u0435\u0441",
+                    "name": "\u041d\u0430\u0437\u0432\u0430\u043d\u0438\u0435",
+                    "region": "\u0420\u0435\u0433\u0438\u043e\u043d"
+                },
+                "description": "\u0414\u043b\u044f \u043f\u043e\u043b\u0443\u0447\u0435\u043d\u0438\u044f PIN-\u043a\u043e\u0434\u0430 \u043f\u0435\u0440\u0435\u0439\u0434\u0438\u0442\u0435 \u043a \u043f\u0443\u043d\u043a\u0442\u0443 **\u041d\u0430\u0441\u0442\u0440\u043e\u0439\u043a\u0438** \u043d\u0430 \u043a\u043e\u043d\u0441\u043e\u043b\u0438 PlayStation 4. \u0417\u0430\u0442\u0435\u043c \u043e\u0442\u043a\u0440\u043e\u0439\u0442\u0435 **\u041d\u0430\u0441\u0442\u0440\u043e\u0439\u043a\u0438 \u043f\u043e\u0434\u043a\u043b\u044e\u0447\u0435\u043d\u0438\u044f \u043c\u043e\u0431\u0438\u043b\u044c\u043d\u043e\u0433\u043e \u043f\u0440\u0438\u043b\u043e\u0436\u0435\u043d\u0438\u044f** \u0438 \u0432\u044b\u0431\u0435\u0440\u0438\u0442\u0435 **\u0414\u043e\u0431\u0430\u0432\u0438\u0442\u044c \u0443\u0441\u0442\u0440\u043e\u0439\u0441\u0442\u0432\u043e**.",
+                "title": "PlayStation 4"
+            }
+        },
+        "title": "PlayStation 4"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/ps4/.translations/zh-Hant.json b/homeassistant/components/ps4/.translations/zh-Hant.json
new file mode 100644
index 00000000000..b8083eba4ac
--- /dev/null
+++ b/homeassistant/components/ps4/.translations/zh-Hant.json
@@ -0,0 +1,32 @@
+{
+    "config": {
+        "abort": {
+            "credential_error": "\u53d6\u5f97\u6191\u8b49\u932f\u8aa4\u3002",
+            "devices_configured": "\u6240\u6709\u88dd\u7f6e\u90fd\u5df2\u8a2d\u5b9a\u5b8c\u6210\u3002",
+            "no_devices_found": "\u5728\u7db2\u8def\u4e0a\u627e\u4e0d\u5230 PlayStation 4 \u8a2d\u5099\u3002",
+            "port_987_bind_error": "\u7121\u6cd5\u7d81\u5b9a\u901a\u8a0a\u57e0 987\u3002",
+            "port_997_bind_error": "\u7121\u6cd5\u7d81\u5b9a\u901a\u8a0a\u57e0 997\u3002"
+        },
+        "error": {
+            "login_failed": "PlayStation 4 \u914d\u5c0d\u5931\u6557\uff0c\u8acb\u78ba\u8a8d PIN \u78bc\u3002",
+            "not_ready": "PlayStation 4 \u4e26\u672a\u958b\u555f\u6216\u672a\u9023\u7dda\u81f3\u7db2\u8def\u3002"
+        },
+        "step": {
+            "creds": {
+                "description": "\u9700\u8981\u6191\u8b49\u3002\u6309\u4e0b\u300c\u50b3\u9001\u300d\u5f8c\u3001\u65bc PS4 \u7b2c\u4e8c\u756b\u9762 App\uff0c\u66f4\u65b0\u88dd\u7f6e\u4e26\u9078\u64c7\u300cHome-Assistant\u300d\u4ee5\u7e7c\u7e8c\u3002",
+                "title": "PlayStation 4"
+            },
+            "link": {
+                "data": {
+                    "code": "PIN",
+                    "ip_address": "IP \u4f4d\u5740",
+                    "name": "\u540d\u7a31",
+                    "region": "\u5340\u57df"
+                },
+                "description": "\u8f38\u5165\u60a8\u7684 PlayStation 4 \u8cc7\u8a0a\uff0c\u300cPIN\u300d\u65bc PlayStation 4 \u4e3b\u6a5f\u7684\u300c\u8a2d\u5b9a\u300d\u5167\uff0c\u4e26\u65bc\u300c\u884c\u52d5\u7a0b\u5f0f\u9023\u7dda\u8a2d\u5b9a\uff08Mobile App Connection Settings\uff09\u300d\u4e2d\u9078\u64c7\u300c\u65b0\u589e\u88dd\u7f6e\u300d\u3002\u8f38\u5165\u6240\u986f\u793a\u7684 PIN \u78bc\u3002",
+                "title": "PlayStation 4"
+            }
+        },
+        "title": "PlayStation 4"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/rainmachine/.translations/es-419.json b/homeassistant/components/rainmachine/.translations/es-419.json
new file mode 100644
index 00000000000..2cb49dc0ac1
--- /dev/null
+++ b/homeassistant/components/rainmachine/.translations/es-419.json
@@ -0,0 +1,19 @@
+{
+    "config": {
+        "error": {
+            "identifier_exists": "Cuenta ya registrada",
+            "invalid_credentials": "Credenciales no v\u00e1lidas"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "ip_address": "Nombre de host o direcci\u00f3n IP",
+                    "password": "Contrase\u00f1a",
+                    "port": "Puerto"
+                },
+                "title": "Completa tu informaci\u00f3n"
+            }
+        },
+        "title": "RainMachine"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/rainmachine/.translations/hu.json b/homeassistant/components/rainmachine/.translations/hu.json
index ff98eccbe5a..0f5b6b71126 100644
--- a/homeassistant/components/rainmachine/.translations/hu.json
+++ b/homeassistant/components/rainmachine/.translations/hu.json
@@ -1,6 +1,7 @@
 {
     "config": {
         "error": {
+            "identifier_exists": "A fi\u00f3k m\u00e1r regisztr\u00e1lt",
             "invalid_credentials": "\u00c9rv\u00e9nytelen hiteles\u00edt\u0151 adatok"
         },
         "step": {
@@ -9,7 +10,8 @@
                     "ip_address": "Kiszolg\u00e1l\u00f3 neve vagy IP c\u00edme",
                     "password": "Jelsz\u00f3",
                     "port": "Port"
-                }
+                },
+                "title": "T\u00f6ltsd ki az adataid"
             }
         },
         "title": "Rainmachine"
diff --git a/homeassistant/components/rainmachine/.translations/it.json b/homeassistant/components/rainmachine/.translations/it.json
new file mode 100644
index 00000000000..40b49a926c7
--- /dev/null
+++ b/homeassistant/components/rainmachine/.translations/it.json
@@ -0,0 +1,19 @@
+{
+    "config": {
+        "error": {
+            "identifier_exists": "Account gi\u00e0 registrato",
+            "invalid_credentials": "Credenziali non valide"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "ip_address": "Nome dell'host o indirizzo IP",
+                    "password": "Password",
+                    "port": "Porta"
+                },
+                "title": "Inserisci i tuoi dati"
+            }
+        },
+        "title": "RainMachine"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/sensor/.translations/moon.it.json b/homeassistant/components/sensor/.translations/moon.it.json
index f22a6d340ae..39c7f22f7af 100644
--- a/homeassistant/components/sensor/.translations/moon.it.json
+++ b/homeassistant/components/sensor/.translations/moon.it.json
@@ -3,7 +3,7 @@
         "first_quarter": "Primo quarto",
         "full_moon": "Luna piena",
         "last_quarter": "Ultimo quarto",
-        "new_moon": "Nuova luna",
+        "new_moon": "Luna nuova",
         "waning_crescent": "Luna calante",
         "waning_gibbous": "Gibbosa calante",
         "waxing_crescent": "Luna crescente",
diff --git a/homeassistant/components/simplisafe/.translations/es-419.json b/homeassistant/components/simplisafe/.translations/es-419.json
new file mode 100644
index 00000000000..709d045c348
--- /dev/null
+++ b/homeassistant/components/simplisafe/.translations/es-419.json
@@ -0,0 +1,19 @@
+{
+    "config": {
+        "error": {
+            "identifier_exists": "Cuenta ya registrada",
+            "invalid_credentials": "Credenciales no v\u00e1lidas"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "code": "C\u00f3digo (para Home Assistant)",
+                    "password": "Contrase\u00f1a",
+                    "username": "Direcci\u00f3n de correo electr\u00f3nico"
+                },
+                "title": "Completa tu informaci\u00f3n"
+            }
+        },
+        "title": "SimpliSafe"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/smartthings/.translations/ca.json b/homeassistant/components/smartthings/.translations/ca.json
index 3c0ca05a8d5..1f27e781ee3 100644
--- a/homeassistant/components/smartthings/.translations/ca.json
+++ b/homeassistant/components/smartthings/.translations/ca.json
@@ -7,7 +7,8 @@
             "token_already_setup": "El testimoni d'autenticaci\u00f3 ja ha estat configurat.",
             "token_forbidden": "El testimoni d'autenticaci\u00f3 no t\u00e9 cont\u00e9 els apartats OAuth obligatoris.",
             "token_invalid_format": "El testimoni d'autenticaci\u00f3 ha d'estar en format UID/GUID",
-            "token_unauthorized": "El testimoni d'autenticaci\u00f3 no \u00e9s v\u00e0lid o ja no t\u00e9 autoritzaci\u00f3."
+            "token_unauthorized": "El testimoni d'autenticaci\u00f3 no \u00e9s v\u00e0lid o ja no t\u00e9 autoritzaci\u00f3.",
+            "webhook_error": "SmartThings no ha pogut validar l'adre\u00e7a final configurada a `base_url`. Revisa els [requisits del component]({component_url})."
         },
         "step": {
             "user": {
diff --git a/homeassistant/components/smartthings/.translations/da.json b/homeassistant/components/smartthings/.translations/da.json
index 1c571b4e639..18412069394 100644
--- a/homeassistant/components/smartthings/.translations/da.json
+++ b/homeassistant/components/smartthings/.translations/da.json
@@ -7,7 +7,8 @@
             "token_already_setup": "Token er allerede konfigureret.",
             "token_forbidden": "Adgangstoken er ikke indenfor OAuth",
             "token_invalid_format": "Adgangstoken skal v\u00e6re i UID/GUID format",
-            "token_unauthorized": "Adgangstoken er ugyldigt eller ikke l\u00e6ngere godkendt."
+            "token_unauthorized": "Adgangstoken er ugyldigt eller ikke l\u00e6ngere godkendt.",
+            "webhook_error": "SmartThings kunne ikke validere slutpunktet konfigureret i `base_url`. Gennemg\u00e5 venligst komponentkravene."
         },
         "step": {
             "user": {
diff --git a/homeassistant/components/smartthings/.translations/es-419.json b/homeassistant/components/smartthings/.translations/es-419.json
new file mode 100644
index 00000000000..4dc94324695
--- /dev/null
+++ b/homeassistant/components/smartthings/.translations/es-419.json
@@ -0,0 +1,25 @@
+{
+    "config": {
+        "error": {
+            "app_setup_error": "No se puede configurar el SmartApp.  Por favor, int\u00e9ntelo de nuevo.",
+            "base_url_not_https": "El `base_url` para el componente `http` debe estar configurado y empezar por `https://`.",
+            "token_already_setup": "El token ya ha sido configurado.",
+            "token_invalid_format": "El token debe estar en formato UID/GUID",
+            "token_unauthorized": "El token no es v\u00e1lido o ya no est\u00e1 autorizado.",
+            "webhook_error": "SmartThings no pudo validar el endpoint configurado en `base_url`. Por favor, revise los requisitos de los componentes."
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "access_token": "Token de acceso"
+                },
+                "title": "Ingresar token de acceso personal"
+            },
+            "wait_install": {
+                "description": "Instale la SmartApp de Home Assistant en al menos una ubicaci\u00f3n y haga clic en enviar.",
+                "title": "Instalar SmartApp"
+            }
+        },
+        "title": "SmartThings"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/smartthings/.translations/hu.json b/homeassistant/components/smartthings/.translations/hu.json
new file mode 100644
index 00000000000..e4970780bc0
--- /dev/null
+++ b/homeassistant/components/smartthings/.translations/hu.json
@@ -0,0 +1,28 @@
+{
+    "config": {
+        "error": {
+            "app_not_installed": "Gy\u0151z\u0151dj meg r\u00f3la, hogy telep\u00edtetted \u00e9s enged\u00e9lyezted a SmartApp Home Assistant alkalmaz\u00e1st, \u00e9s pr\u00f3b\u00e1lkozz \u00fajra.",
+            "app_setup_error": "A SmartApp be\u00e1ll\u00edt\u00e1sa nem siker\u00fclt. K\u00e9rlek pr\u00f3b\u00e1ld \u00fajra.",
+            "base_url_not_https": "A `http` \u00f6sszetev\u0151 `base_url` be\u00e1ll\u00edt\u00e1s\u00e1t konfigur\u00e1lni kell, \u00e9s `https: //` -vel kell kezdeni.",
+            "token_already_setup": "A tokent m\u00e1r be\u00e1ll\u00edtottuk.",
+            "token_forbidden": "A token nem rendelkezik a sz\u00fcks\u00e9ges OAuth-tartom\u00e1nyokkal.",
+            "token_invalid_format": "A tokennek UID / GUID form\u00e1tumban kell lennie",
+            "token_unauthorized": "A token \u00e9rv\u00e9nytelen vagy m\u00e1r nem enged\u00e9lyezett.",
+            "webhook_error": "A SmartThings nem tudta \u00e9rv\u00e9nyes\u00edteni a `base_url`-ben konfigur\u00e1lt v\u00e9gpontot. K\u00e9rlek, tekintsd \u00e1t az \u00f6sszetev\u0151 k\u00f6vetelm\u00e9nyeit."
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "access_token": "Hozz\u00e1f\u00e9r\u00e9s a Tokenhez"
+                },
+                "description": "K\u00e9rlek add meg a SmartThings [Personal Access Tokent]({token_url}), amit az [instrukci\u00f3k] ({component_url}) alapj\u00e1n hozt\u00e1l l\u00e9tre.",
+                "title": "Adja meg a szem\u00e9lyes hozz\u00e1f\u00e9r\u00e9si Tokent"
+            },
+            "wait_install": {
+                "description": "K\u00e9rj\u00fck, telep\u00edtse a Home Assistant SmartAppot legal\u00e1bb egy helyre, \u00e9s kattintson a K\u00fcld\u00e9s gombra.",
+                "title": "A SmartApp telep\u00edt\u00e9se"
+            }
+        },
+        "title": "SmartThings"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/smartthings/.translations/it.json b/homeassistant/components/smartthings/.translations/it.json
new file mode 100644
index 00000000000..486a61847a7
--- /dev/null
+++ b/homeassistant/components/smartthings/.translations/it.json
@@ -0,0 +1,26 @@
+{
+    "config": {
+        "error": {
+            "app_not_installed": "Assicurati di avere installato ed autorizzato la SmartApp Home Assistant e riprova.",
+            "app_setup_error": "Impossibile configurare SmartApp. Riprovare.",
+            "base_url_not_https": "Il `base_url` per il componente `http` deve essere configurato e deve iniziare con `https://`.",
+            "token_already_setup": "Il token \u00e8 gi\u00e0 stato configurato.",
+            "token_invalid_format": "Il token deve essere nel formato UID/GUID",
+            "token_unauthorized": "Il token non \u00e8 valido o non \u00e8 pi\u00f9 autorizzato.",
+            "webhook_error": "SmartThings non ha potuto convalidare l'endpoint configurato in `base_url`. Si prega di rivedere i requisiti del componente."
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "access_token": "Token di accesso"
+                },
+                "description": "Inserisci un [Token di Accesso Personale]({token_url}) di SmartThings che \u00e8 stato creato secondo lo [istruzioni]({component_url}).",
+                "title": "Inserisci il Token di Accesso Personale"
+            },
+            "wait_install": {
+                "title": "Installa SmartApp"
+            }
+        },
+        "title": "SmartThings"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/smartthings/.translations/ko.json b/homeassistant/components/smartthings/.translations/ko.json
index e4131543d50..f7d86af8394 100644
--- a/homeassistant/components/smartthings/.translations/ko.json
+++ b/homeassistant/components/smartthings/.translations/ko.json
@@ -3,11 +3,12 @@
         "error": {
             "app_not_installed": "Home Assistant SmartApp \uc744 \uc124\uce58\ud558\uace0 \uc778\uc99d\ud588\ub294\uc9c0 \ud655\uc778\ud558\uace0 \ub2e4\uc2dc \uc2dc\ub3c4\ud574\uc8fc\uc138\uc694.",
             "app_setup_error": "SmartApp \uc744 \uc124\uc815\ud560 \uc218 \uc5c6\uc2b5\ub2c8\ub2e4. \ub2e4\uc2dc \uc2dc\ub3c4\ud574\uc8fc\uc138\uc694.",
-            "base_url_not_https": "`http` \uad6c\uc131\uc694\uc18c\ub97c \uc704\ud55c `base_url` \uc740 `https://`\ub85c \uc2dc\uc791\ud558\ub3c4\ub85d \uad6c\uc131\ub418\uc5b4\uc57c\ud569\ub2c8\ub2e4.",
+            "base_url_not_https": "`http` \uad6c\uc131\uc694\uc18c\uc758 `base_url` \uc740 \ubc18\ub4dc\uc2dc `https://`\ub85c \uc2dc\uc791\ud558\ub3c4\ub85d \uad6c\uc131\ub418\uc5b4 \uc788\uc5b4\uc57c \ud569\ub2c8\ub2e4.",
             "token_already_setup": "\ud1a0\ud070\uc774 \uc774\ubbf8 \uc124\uc815\ub418\uc5c8\uc2b5\ub2c8\ub2e4.",
             "token_forbidden": "\ud1a0\ud070\uc5d0 \ud544\uc694\ud55c OAuth \ubc94\uc704\ubaa9\ub85d\uc774 \uc5c6\uc2b5\ub2c8\ub2e4.",
-            "token_invalid_format": "\ud1a0\ud070\uc740 UID/GUID \ud615\uc2dd\uc774\uc5b4\uc57c\ud569\ub2c8\ub2e4",
-            "token_unauthorized": "\ud1a0\ud070\uc774 \uc720\ud6a8\ud558\uc9c0 \uc54a\uac70\ub098 \uc2b9\uc778\ub418\uc9c0 \uc54a\uc558\uc2b5\ub2c8\ub2e4."
+            "token_invalid_format": "\ud1a0\ud070\uc740 UID/GUID \ud615\uc2dd\uc774\uc5b4\uc57c \ud569\ub2c8\ub2e4",
+            "token_unauthorized": "\ud1a0\ud070\uc774 \uc720\ud6a8\ud558\uc9c0 \uc54a\uac70\ub098 \uc2b9\uc778\ub418\uc9c0 \uc54a\uc558\uc2b5\ub2c8\ub2e4.",
+            "webhook_error": "SmartThings \ub294 `base_url` \uc5d0 \uc124\uc815\ub41c \uc5d4\ub4dc\ud3ec\uc778\ud2b8\uc758 \uc720\ud6a8\uc131\uc744 \uac80\uc0ac \ud560 \uc218 \uc5c6\uc2b5\ub2c8\ub2e4. \uad6c\uc131\uc694\uc18c\uc758 \uc694\uad6c \uc0ac\ud56d\uc744 \uac80\ud1a0\ud574\uc8fc\uc138\uc694."
         },
         "step": {
             "user": {
diff --git a/homeassistant/components/smartthings/.translations/lb.json b/homeassistant/components/smartthings/.translations/lb.json
index fd59d187314..fc80ba9f722 100644
--- a/homeassistant/components/smartthings/.translations/lb.json
+++ b/homeassistant/components/smartthings/.translations/lb.json
@@ -7,7 +7,8 @@
             "token_already_setup": "Den Jeton gouf schonn ageriicht.",
             "token_forbidden": "De Jeton huet net d\u00e9i n\u00e9ideg OAuth M\u00e9iglechkeeten.",
             "token_invalid_format": "De Jeton muss am UID/GUID Format sinn",
-            "token_unauthorized": "De Jeton ass ong\u00eblteg oder net m\u00e9i autoris\u00e9iert."
+            "token_unauthorized": "De Jeton ass ong\u00eblteg oder net m\u00e9i autoris\u00e9iert.",
+            "webhook_error": "SmartThings konnt den an der 'base_url' defin\u00e9ierten Endpoint net valid\u00e9ieren. Iwwerpr\u00e9ift d'Viraussetzunge vun d\u00ebser Komponente"
         },
         "step": {
             "user": {
diff --git a/homeassistant/components/smartthings/.translations/pl.json b/homeassistant/components/smartthings/.translations/pl.json
index 570f1130383..33803994764 100644
--- a/homeassistant/components/smartthings/.translations/pl.json
+++ b/homeassistant/components/smartthings/.translations/pl.json
@@ -7,7 +7,8 @@
             "token_already_setup": "Token zosta\u0142 ju\u017c skonfigurowany.",
             "token_forbidden": "Token nie ma wymaganych zakres\u00f3w OAuth.",
             "token_invalid_format": "Token musi by\u0107 w formacie UID/GUID",
-            "token_unauthorized": "Token jest niewa\u017cny lub nie ma ju\u017c autoryzacji."
+            "token_unauthorized": "Token jest niewa\u017cny lub nie ma ju\u017c autoryzacji.",
+            "webhook_error": "SmartThings nie mo\u017ce sprawdzi\u0107 poprawno\u015bci punktu ko\u0144cowego skonfigurowanego w `base_url`. Sprawd\u017a wymagania dotycz\u0105ce komponentu."
         },
         "step": {
             "user": {
diff --git a/homeassistant/components/smartthings/.translations/pt.json b/homeassistant/components/smartthings/.translations/pt.json
index d805cfc563d..f49fe04ae8e 100644
--- a/homeassistant/components/smartthings/.translations/pt.json
+++ b/homeassistant/components/smartthings/.translations/pt.json
@@ -1,16 +1,24 @@
 {
     "config": {
         "error": {
+            "app_not_installed": "Por favor, instale o Home Assistant SmartApp em pelo menos um local e tente de novo.",
             "app_setup_error": "N\u00e3o \u00e9 poss\u00edvel configurar o SmartApp. Por favor, tente novamente.",
-            "token_already_setup": "O token j\u00e1 foi configurado."
+            "base_url_not_https": "O `base_url` para o componente` http` deve ser configurado e iniciar com `https://`.",
+            "token_already_setup": "O token j\u00e1 foi configurado.",
+            "token_forbidden": "O token n\u00e3o tem tem a cobertura OAuth necess\u00e1ria.",
+            "token_invalid_format": "O token deve estar no formato UID/GUID",
+            "token_unauthorized": "O token \u00e9 inv\u00e1lido ou ja n\u00e3o est\u00e1 autorizado."
         },
         "step": {
             "user": {
                 "data": {
                     "access_token": "Token de Acesso"
-                }
+                },
+                "description": "Por favor, insira um SmartThings [Personal Access Token]({token_url} ) que foi criado de acordo com as [instru\u00e7\u00f5es]({component_url}).",
+                "title": "Insira o Token de acesso pessoal"
             },
             "wait_install": {
+                "description": "Por favor, instale o Home Assistant SmartApp em pelo menos um local e clique em enviar.",
                 "title": "Instalar SmartApp"
             }
         },
diff --git a/homeassistant/components/smartthings/.translations/ru.json b/homeassistant/components/smartthings/.translations/ru.json
index 334e5d8cb23..6e34cf8a49a 100644
--- a/homeassistant/components/smartthings/.translations/ru.json
+++ b/homeassistant/components/smartthings/.translations/ru.json
@@ -1,13 +1,14 @@
 {
     "config": {
         "error": {
-            "app_not_installed": "\u0423\u0431\u0435\u0434\u0438\u0442\u0435\u0441\u044c, \u0447\u0442\u043e \u0412\u044b \u0443\u0441\u0442\u0430\u043d\u043e\u0432\u0438\u043b\u0438 \u0438 \u0430\u0432\u0442\u043e\u0440\u0438\u0437\u043e\u0432\u0430\u043b\u0438 SmartApp Home Assistant \u0438 \u043f\u043e\u0432\u0442\u043e\u0440\u0438\u0442\u0435 \u043f\u043e\u043f\u044b\u0442\u043a\u0443.",
-            "app_setup_error": "\u041d\u0435 \u0443\u0434\u0430\u0435\u0442\u0441\u044f \u043d\u0430\u0441\u0442\u0440\u043e\u0438\u0442\u044c SmartApp.  \u041f\u043e\u0436\u0430\u043b\u0443\u0439\u0441\u0442\u0430, \u043f\u043e\u043f\u0440\u043e\u0431\u0443\u0439\u0442\u0435 \u0435\u0449\u0435 \u0440\u0430\u0437.",
+            "app_not_installed": "\u0423\u0431\u0435\u0434\u0438\u0442\u0435\u0441\u044c, \u0447\u0442\u043e \u0412\u044b \u0443\u0441\u0442\u0430\u043d\u043e\u0432\u0438\u043b\u0438 \u0438 \u0430\u0432\u0442\u043e\u0440\u0438\u0437\u043e\u0432\u0430\u043b\u0438 SmartApp 'Home Assistant' \u0438 \u043f\u043e\u0432\u0442\u043e\u0440\u0438\u0442\u0435 \u043f\u043e\u043f\u044b\u0442\u043a\u0443.",
+            "app_setup_error": "\u041d\u0435 \u0443\u0434\u0430\u0435\u0442\u0441\u044f \u043d\u0430\u0441\u0442\u0440\u043e\u0438\u0442\u044c SmartApp. \u041f\u043e\u0436\u0430\u043b\u0443\u0439\u0441\u0442\u0430, \u043f\u043e\u043f\u0440\u043e\u0431\u0443\u0439\u0442\u0435 \u0435\u0449\u0435 \u0440\u0430\u0437.",
             "base_url_not_https": "\u0412 \u043a\u043e\u043c\u043f\u043e\u043d\u0435\u043d\u0442\u0435 `http` \u0434\u043e\u043b\u0436\u0435\u043d \u0431\u044b\u0442\u044c \u0443\u043a\u0430\u0437\u0430\u043d \u043f\u0430\u0440\u0430\u043c\u0435\u0442\u0440 `base_url`, \u043d\u0430\u0447\u0438\u043d\u0430\u044e\u0449\u0438\u0439\u0441\u044f \u0441 `https://`.",
             "token_already_setup": "\u0422\u043e\u043a\u0435\u043d \u0443\u0436\u0435 \u043d\u0430\u0441\u0442\u0440\u043e\u0435\u043d.",
             "token_forbidden": "\u0422\u043e\u043a\u0435\u043d \u043d\u0435 \u043c\u043e\u0436\u0435\u0442 \u0431\u044b\u0442\u044c \u0438\u0441\u043f\u043e\u043b\u044c\u0437\u043e\u0432\u0430\u043d \u0434\u043b\u044f OAuth.",
             "token_invalid_format": "\u0422\u043e\u043a\u0435\u043d \u0434\u043e\u043b\u0436\u0435\u043d \u0431\u044b\u0442\u044c \u0432 \u0444\u043e\u0440\u043c\u0430\u0442\u0435 UID / GUID",
-            "token_unauthorized": "\u0422\u043e\u043a\u0435\u043d \u043d\u0435\u0434\u0435\u0439\u0441\u0442\u0432\u0438\u0442\u0435\u043b\u0435\u043d \u0438\u043b\u0438 \u0431\u043e\u043b\u044c\u0448\u0435 \u043d\u0435 \u0430\u0432\u0442\u043e\u0440\u0438\u0437\u043e\u0432\u0430\u043d."
+            "token_unauthorized": "\u0422\u043e\u043a\u0435\u043d \u043d\u0435\u0434\u0435\u0439\u0441\u0442\u0432\u0438\u0442\u0435\u043b\u0435\u043d \u0438\u043b\u0438 \u0431\u043e\u043b\u044c\u0448\u0435 \u043d\u0435 \u0430\u0432\u0442\u043e\u0440\u0438\u0437\u043e\u0432\u0430\u043d.",
+            "webhook_error": "SmartThings \u043d\u0435 \u043c\u043e\u0436\u0435\u0442 \u043f\u0440\u043e\u0432\u0435\u0440\u0438\u0442\u044c \u043a\u043e\u043d\u0435\u0447\u043d\u0443\u044e \u0442\u043e\u0447\u043a\u0443, \u043d\u0430\u0441\u0442\u0440\u043e\u0435\u043d\u043d\u0443\u044e \u0432 `base_url`. \u041f\u043e\u0436\u0430\u043b\u0443\u0439\u0441\u0442\u0430, \u043e\u0437\u043d\u0430\u043a\u043e\u043c\u044c\u0442\u0435\u0441\u044c \u0441 \u0438\u043d\u0441\u0442\u0440\u0443\u043a\u0446\u0438\u0435\u0439 \u043a \u043a\u043e\u043c\u043f\u043e\u043d\u0435\u043d\u0442\u0443."
         },
         "step": {
             "user": {
@@ -18,7 +19,7 @@
                 "title": "\u0412\u0432\u0435\u0434\u0438\u0442\u0435 \u043f\u0435\u0440\u0441\u043e\u043d\u0430\u043b\u044c\u043d\u044b\u0439 \u0442\u043e\u043a\u0435\u043d \u0434\u043e\u0441\u0442\u0443\u043f\u0430"
             },
             "wait_install": {
-                "description": "\u041f\u043e\u0436\u0430\u043b\u0443\u0439\u0441\u0442\u0430, \u0443\u0441\u0442\u0430\u043d\u043e\u0432\u0438\u0442\u0435 SmartApp Home Assistant \u0438 \u043d\u0430\u0436\u043c\u0438\u0442\u0435 **\u041f\u041e\u0414\u0422\u0412\u0415\u0420\u0414\u0418\u0422\u042c**.",
+                "description": "\u041f\u043e\u0436\u0430\u043b\u0443\u0439\u0441\u0442\u0430, \u0443\u0441\u0442\u0430\u043d\u043e\u0432\u0438\u0442\u0435 SmartApp 'Home Assistant' \u0438 \u043d\u0430\u0436\u043c\u0438\u0442\u0435 **\u041f\u041e\u0414\u0422\u0412\u0415\u0420\u0414\u0418\u0422\u042c**.",
                 "title": "SmartThings"
             }
         },
diff --git a/homeassistant/components/smartthings/.translations/sl.json b/homeassistant/components/smartthings/.translations/sl.json
new file mode 100644
index 00000000000..e274d8c9394
--- /dev/null
+++ b/homeassistant/components/smartthings/.translations/sl.json
@@ -0,0 +1,27 @@
+{
+    "config": {
+        "error": {
+            "app_not_installed": "Prepri\u010dajte se, da ste namestili in pooblastili Home Assistant SmartApp in poskusite znova.",
+            "app_setup_error": "SmartApp ni mogo\u010de nastaviti. Prosim poskusite ponovno.",
+            "base_url_not_https": "`Base_url` za` http 'komponento je treba konfigurirati in za\u010deti z `https: //`.",
+            "token_already_setup": "\u017deton je \u017ee nastavljen.",
+            "token_forbidden": "\u017deton nima zahtevanih OAuth obsegov.",
+            "token_invalid_format": "\u017deton mora biti v formatu UID / GUID",
+            "token_unauthorized": "\u017deton ni veljaven ali ni ve\u010d poobla\u0161\u010den."
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "access_token": "\u017deton za dostop"
+                },
+                "description": "Prosimo vnesite Smartthings [\u017deton za osebni dostop]({token_url}) ki je bil kreiran v skladu z [navodili]({component_url}).",
+                "title": "Vnesite \u017eeton za osebni dostop"
+            },
+            "wait_install": {
+                "description": "Prosimo, namestite Home Assistant SmartApp v vsaj eni lokaciji in kliknite po\u0161lji.",
+                "title": "Namesti SmartApp"
+            }
+        },
+        "title": "SmartThings"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/smartthings/.translations/zh-Hant.json b/homeassistant/components/smartthings/.translations/zh-Hant.json
index 952eafec60c..10d73f8be35 100644
--- a/homeassistant/components/smartthings/.translations/zh-Hant.json
+++ b/homeassistant/components/smartthings/.translations/zh-Hant.json
@@ -7,7 +7,8 @@
             "token_already_setup": "\u5bc6\u9470\u5df2\u8a2d\u5b9a\u904e\u3002",
             "token_forbidden": "\u5bc6\u9470\u4e0d\u5177\u6240\u9700\u7684 OAuth \u7bc4\u570d\u3002",
             "token_invalid_format": "\u5bc6\u9470\u5fc5\u9808\u70ba UID/GUID \u683c\u5f0f",
-            "token_unauthorized": "\u5bc6\u9470\u7121\u6548\u6216\u4e0d\u518d\u5177\u6709\u6388\u6b0a\u3002"
+            "token_unauthorized": "\u5bc6\u9470\u7121\u6548\u6216\u4e0d\u518d\u5177\u6709\u6388\u6b0a\u3002",
+            "webhook_error": "SmartThings \u7121\u6cd5\u8a8d\u8b49\u300cbase_url\u300d\u4e2d\u8a2d\u5b9a\u4e4b\u7aef\u9ede\u3002\u8acb\u518d\u6b21\u78ba\u8a8d\u5143\u4ef6\u9700\u6c42\u3002"
         },
         "step": {
             "user": {
diff --git a/homeassistant/components/smhi/.translations/es-419.json b/homeassistant/components/smhi/.translations/es-419.json
new file mode 100644
index 00000000000..a3fb9ee5e27
--- /dev/null
+++ b/homeassistant/components/smhi/.translations/es-419.json
@@ -0,0 +1,19 @@
+{
+    "config": {
+        "error": {
+            "name_exists": "El nombre ya existe",
+            "wrong_location": "Ubicaci\u00f3n Suecia solamente"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "latitude": "Latitud",
+                    "longitude": "Longitud",
+                    "name": "Nombre"
+                },
+                "title": "Ubicaci\u00f3n en Suecia"
+            }
+        },
+        "title": "Servicio meteorol\u00f3gico sueco (SMHI)"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/smhi/.translations/hu.json b/homeassistant/components/smhi/.translations/hu.json
index 425cf927631..8c79ff3bfaf 100644
--- a/homeassistant/components/smhi/.translations/hu.json
+++ b/homeassistant/components/smhi/.translations/hu.json
@@ -13,6 +13,7 @@
                 },
                 "title": "Helysz\u00edn Sv\u00e9dorsz\u00e1gban"
             }
-        }
+        },
+        "title": "Sv\u00e9d Meteorol\u00f3giai Szolg\u00e1lat (SMHI)"
     }
 }
\ No newline at end of file
diff --git a/homeassistant/components/smhi/.translations/it.json b/homeassistant/components/smhi/.translations/it.json
new file mode 100644
index 00000000000..b8c228f7e9e
--- /dev/null
+++ b/homeassistant/components/smhi/.translations/it.json
@@ -0,0 +1,19 @@
+{
+    "config": {
+        "error": {
+            "name_exists": "Il nome \u00e8 gi\u00e0 esistente",
+            "wrong_location": "Localit\u00e0 solamente della Svezia"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "latitude": "Latitudine",
+                    "longitude": "Logitudine",
+                    "name": "Nome"
+                },
+                "title": "Localit\u00e0 in Svezia"
+            }
+        },
+        "title": "Servizio meteo svedese (SMHI)"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/sonos/.translations/it.json b/homeassistant/components/sonos/.translations/it.json
index e32557f1d95..06c873b436e 100644
--- a/homeassistant/components/sonos/.translations/it.json
+++ b/homeassistant/components/sonos/.translations/it.json
@@ -6,7 +6,7 @@
         },
         "step": {
             "confirm": {
-                "description": "Vuoi installare Sonos",
+                "description": "Vuoi configurare Sonos?",
                 "title": "Sonos"
             }
         },
diff --git a/homeassistant/components/tellduslive/.translations/es-419.json b/homeassistant/components/tellduslive/.translations/es-419.json
new file mode 100644
index 00000000000..bf74d104835
--- /dev/null
+++ b/homeassistant/components/tellduslive/.translations/es-419.json
@@ -0,0 +1,23 @@
+{
+    "config": {
+        "abort": {
+            "all_configured": "TelldusLive ya est\u00e1 configurado",
+            "already_setup": "TelldusLive ya est\u00e1 configurado",
+            "unknown": "Se produjo un error desconocido"
+        },
+        "error": {
+            "auth_error": "Error de autenticaci\u00f3n, por favor intente de nuevo"
+        },
+        "step": {
+            "auth": {
+                "description": "Para vincular su cuenta de TelldusLive: \n 1. Haga clic en el siguiente enlace \n 2. Inicia sesi\u00f3n en Telldus Live \n 3. Autorice ** {app_name} ** (haga clic en ** S\u00ed **). \n 4. Vuelve aqu\u00ed y haz clic en ** ENVIAR **. \n\n [Enlace a la cuenta de TelldusLive] ( {auth_url} )",
+                "title": "Autenticar con TelldusLive"
+            },
+            "user": {
+                "data": {
+                    "host": "Host"
+                }
+            }
+        }
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/tellduslive/.translations/hu.json b/homeassistant/components/tellduslive/.translations/hu.json
index ffa983db093..6057d7b3212 100644
--- a/homeassistant/components/tellduslive/.translations/hu.json
+++ b/homeassistant/components/tellduslive/.translations/hu.json
@@ -1,15 +1,24 @@
 {
     "config": {
         "abort": {
+            "all_configured": "A TelldusLive-ot m\u00e1r be\u00e1ll\u00edtottuk.",
+            "already_setup": "A TelldusLive m\u00e1r be van \u00e1ll\u00edtva",
+            "authorize_url_fail": "Ismeretlen hiba t\u00f6rt\u00e9nt a hiteles\u00edt\u00e9si link gener\u00e1l\u00e1sa sor\u00e1n.",
+            "authorize_url_timeout": "Id\u0151t\u00fall\u00e9p\u00e9s az \u00e9rv\u00e9nyes\u00edt\u00e9si url gener\u00e1l\u00e1sa sor\u00e1n.",
             "unknown": "Ismeretlen hiba t\u00f6rt\u00e9nt"
         },
+        "error": {
+            "auth_error": "Hiteles\u00edt\u00e9si hiba, pr\u00f3b\u00e1lkozz \u00fajra"
+        },
         "step": {
             "user": {
                 "data": {
                     "host": "Kiszolg\u00e1l\u00f3"
                 },
-                "description": "\u00dcres"
+                "description": "\u00dcres",
+                "title": "V\u00e1lassz v\u00e9gpontot."
             }
-        }
+        },
+        "title": "Telldus Live"
     }
 }
\ No newline at end of file
diff --git a/homeassistant/components/tellduslive/.translations/it.json b/homeassistant/components/tellduslive/.translations/it.json
new file mode 100644
index 00000000000..90f13184a67
--- /dev/null
+++ b/homeassistant/components/tellduslive/.translations/it.json
@@ -0,0 +1,26 @@
+{
+    "config": {
+        "abort": {
+            "all_configured": "TelldusLive \u00e8 gi\u00e0 configurato",
+            "already_setup": "TelldusLive \u00e8 gi\u00e0 configurato",
+            "authorize_url_fail": "Errore sconosciuto nel generare l'url di autorizzazione",
+            "authorize_url_timeout": "Tempo scaduto nel generare l'url di autorizzazione",
+            "unknown": "Si \u00e8 verificato un errore sconosciuto."
+        },
+        "error": {
+            "auth_error": "Errore di autenticazione, riprovare"
+        },
+        "step": {
+            "auth": {
+                "title": "Autenticati con TelldusLive"
+            },
+            "user": {
+                "data": {
+                    "host": "Host"
+                },
+                "title": "Scegli l'endpoint."
+            }
+        },
+        "title": "Telldus Live"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/tellduslive/.translations/pt.json b/homeassistant/components/tellduslive/.translations/pt.json
index 90da12451df..a13f71f7505 100644
--- a/homeassistant/components/tellduslive/.translations/pt.json
+++ b/homeassistant/components/tellduslive/.translations/pt.json
@@ -2,10 +2,14 @@
     "config": {
         "abort": {
             "all_configured": "TelldusLive j\u00e1 est\u00e1 configurado",
+            "already_setup": "TelldusLive j\u00e1 est\u00e1 configurado",
             "authorize_url_fail": "Erro desconhecido ao gerar um URL de autoriza\u00e7\u00e3o.",
             "authorize_url_timeout": "Limite temporal ultrapassado ao gerar um URL de autoriza\u00e7\u00e3o.",
             "unknown": "Ocorreu um erro desconhecido"
         },
+        "error": {
+            "auth_error": "Erro de autentica\u00e7\u00e3o, por favor tente novamente"
+        },
         "step": {
             "auth": {
                 "description": "Para ligar \u00e0 sua conta do TelldusLive: \n 1. Clique no link abaixo \n 2. Fa\u00e7a o login no Telldus Live \n 3. Autorize **{app_name}** (clique em **Sim**). \n 4. Volte aqui e clique em **ENVIAR**. \n\n [Ligar \u00e0 TelldusLive] ( {auth_url} )",
diff --git a/homeassistant/components/tellduslive/.translations/zh-Hant.json b/homeassistant/components/tellduslive/.translations/zh-Hant.json
index c632b543634..c95e96b21c9 100644
--- a/homeassistant/components/tellduslive/.translations/zh-Hant.json
+++ b/homeassistant/components/tellduslive/.translations/zh-Hant.json
@@ -20,7 +20,7 @@
                     "host": "\u4e3b\u6a5f\u7aef"
                 },
                 "description": "\u7a7a\u767d",
-                "title": "\u9078\u64c7 endpoint\u3002"
+                "title": "\u9078\u64c7\u7aef\u9ede\u3002"
             }
         },
         "title": "Telldus Live"
diff --git a/homeassistant/components/tplink/.translations/en.json b/homeassistant/components/tplink/.translations/en.json
index e353c1363ab..ff349fe1b68 100644
--- a/homeassistant/components/tplink/.translations/en.json
+++ b/homeassistant/components/tplink/.translations/en.json
@@ -1,15 +1,15 @@
 {
-  "config": {
-    "title": "TP-Link Smart Home",
-    "step": {
-      "confirm": {
-        "title": "TP-Link Smart Home",
-        "description": "Do you want to setup TP-Link smart devices?"
-      }
-    },
-    "abort": {
-      "single_instance_allowed": "Only a single configuration is necessary.",
-      "no_devices_found": "No TP-Link devices found on the network."
+    "config": {
+        "abort": {
+            "no_devices_found": "No TP-Link devices found on the network.",
+            "single_instance_allowed": "Only a single configuration is necessary."
+        },
+        "step": {
+            "confirm": {
+                "description": "Do you want to setup TP-Link smart devices?",
+                "title": "TP-Link Smart Home"
+            }
+        },
+        "title": "TP-Link Smart Home"
     }
-  }
-}
+}
\ No newline at end of file
diff --git a/homeassistant/components/tradfri/.translations/es-419.json b/homeassistant/components/tradfri/.translations/es-419.json
new file mode 100644
index 00000000000..55016606e2d
--- /dev/null
+++ b/homeassistant/components/tradfri/.translations/es-419.json
@@ -0,0 +1,22 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "El Bridge ya est\u00e1 configurado"
+        },
+        "error": {
+            "invalid_key": "Error al registrarse con la clave proporcionada. Si esto sigue sucediendo, intente reiniciar el gateway.",
+            "timeout": "Tiempo de espera para validar el c\u00f3digo."
+        },
+        "step": {
+            "auth": {
+                "data": {
+                    "host": "Host",
+                    "security_code": "C\u00f3digo de seguridad"
+                },
+                "description": "Puede encontrar el c\u00f3digo de seguridad en la parte posterior de su puerta de enlace.",
+                "title": "Ingrese el c\u00f3digo de seguridad"
+            }
+        },
+        "title": "IKEA TR\u00c5DFRI"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/tradfri/.translations/it.json b/homeassistant/components/tradfri/.translations/it.json
index 3d5101bbce8..4c114492336 100644
--- a/homeassistant/components/tradfri/.translations/it.json
+++ b/homeassistant/components/tradfri/.translations/it.json
@@ -1,5 +1,23 @@
 {
     "config": {
+        "abort": {
+            "already_configured": "Il bridge \u00e8 gi\u00e0 configurato"
+        },
+        "error": {
+            "cannot_connect": "Impossibile connettersi al gateway.",
+            "invalid_key": "Impossibile registrarsi con la chiave fornita. Se questo continua a succedere, prova a riavviare il gateway.",
+            "timeout": "Tempo scaduto per la validazione del codice."
+        },
+        "step": {
+            "auth": {
+                "data": {
+                    "host": "Host",
+                    "security_code": "Codice di sicurezza"
+                },
+                "description": "Puoi trovare il codice di sicurezza sul retro del tuo gateway.",
+                "title": "Inserisci il codice di sicurezza"
+            }
+        },
         "title": "IKEA TR\u00c5DFRI"
     }
 }
\ No newline at end of file
diff --git a/homeassistant/components/twilio/.translations/es-419.json b/homeassistant/components/twilio/.translations/es-419.json
new file mode 100644
index 00000000000..a5fd83abef4
--- /dev/null
+++ b/homeassistant/components/twilio/.translations/es-419.json
@@ -0,0 +1,18 @@
+{
+    "config": {
+        "abort": {
+            "not_internet_accessible": "Su instancia de Home Assistant debe ser accesible desde Internet para recibir los mensajes de Twilio.",
+            "one_instance_allowed": "Solo una instancia es necesaria."
+        },
+        "create_entry": {
+            "default": "Para enviar eventos a Home Assistant, deber\u00e1 configurar [Webhooks with Twilio] ( {twilio_url} ). \n\n Complete la siguiente informaci\u00f3n: \n\n - URL: ` {webhook_url} ` \n - M\u00e9todo: POST \n - Tipo de contenido: application / x-www-form-urlencoded \n\n Consulte [la documentaci\u00f3n] ( {docs_url} ) sobre c\u00f3mo configurar las automatizaciones para manejar los datos entrantes."
+        },
+        "step": {
+            "user": {
+                "description": "\u00bfEst\u00e1s seguro de que quieres configurar Twilio?",
+                "title": "Configurar el Webhook Twilio"
+            }
+        },
+        "title": "Twilio"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/twilio/.translations/hu.json b/homeassistant/components/twilio/.translations/hu.json
index 257dd24f082..ae96d08976d 100644
--- a/homeassistant/components/twilio/.translations/hu.json
+++ b/homeassistant/components/twilio/.translations/hu.json
@@ -1,7 +1,15 @@
 {
     "config": {
         "abort": {
+            "not_internet_accessible": "A Home Assistant rendszerednek el\u00e9rhet\u0151nek kell lennie az internetr\u0151l a Twilio \u00fczenetek fogad\u00e1s\u00e1hoz.",
             "one_instance_allowed": "Csak egyetlen konfigur\u00e1ci\u00f3 sz\u00fcks\u00e9ges."
-        }
+        },
+        "step": {
+            "user": {
+                "description": "Biztosan be szeretn\u00e9d \u00e1ll\u00edtani a Twilio-t?",
+                "title": "A Twilio Webhook be\u00e1ll\u00edt\u00e1sa"
+            }
+        },
+        "title": "Twilio"
     }
 }
\ No newline at end of file
diff --git a/homeassistant/components/twilio/.translations/it.json b/homeassistant/components/twilio/.translations/it.json
new file mode 100644
index 00000000000..4f8926c23e5
--- /dev/null
+++ b/homeassistant/components/twilio/.translations/it.json
@@ -0,0 +1,18 @@
+{
+    "config": {
+        "abort": {
+            "not_internet_accessible": "La tua istanza di Home Assistant deve essere accessibile da Internet per ricevere messaggi da Twilio.",
+            "one_instance_allowed": "\u00c8 necessaria una sola istanza."
+        },
+        "create_entry": {
+            "default": "Per inviare eventi a Home Assistant, dovrai configurare [Webhooks con Twilio]({twilio_url})\n\n Compila le seguenti informazioni: \n\n - URL: ` {webhook_url} ` \n - Method: POST \n - Content Type: application/x-www-form-urlencoded\n\n Vedi [la documentazione]({docs_url}) su come configurare le automazioni per gestire i dati in arrivo."
+        },
+        "step": {
+            "user": {
+                "description": "Sei sicuro di voler configurare Twilio?",
+                "title": "Configura il webhook di Twilio"
+            }
+        },
+        "title": "Twilio"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/unifi/.translations/es-419.json b/homeassistant/components/unifi/.translations/es-419.json
new file mode 100644
index 00000000000..9b729e4c4ab
--- /dev/null
+++ b/homeassistant/components/unifi/.translations/es-419.json
@@ -0,0 +1,26 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "El sitio del controlador ya est\u00e1 configurado",
+            "user_privilege": "El usuario necesita ser administrador"
+        },
+        "error": {
+            "faulty_credentials": "Credenciales de usuario incorrectas",
+            "service_unavailable": "No hay servicio disponible"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "host": "Host",
+                    "password": "Contrase\u00f1a",
+                    "port": "Puerto",
+                    "site": "ID del sitio",
+                    "username": "Nombre de usuario",
+                    "verify_ssl": "Controlador usando el certificado apropiado"
+                },
+                "title": "Configurar el controlador UniFi"
+            }
+        },
+        "title": "Controlador UniFi"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/unifi/.translations/hu.json b/homeassistant/components/unifi/.translations/hu.json
index 4a664a40c74..6f78beaffd6 100644
--- a/homeassistant/components/unifi/.translations/hu.json
+++ b/homeassistant/components/unifi/.translations/hu.json
@@ -14,9 +14,12 @@
                     "password": "Jelsz\u00f3",
                     "port": "Port",
                     "site": "Site azonos\u00edt\u00f3",
-                    "username": "Felhaszn\u00e1l\u00f3n\u00e9v"
-                }
+                    "username": "Felhaszn\u00e1l\u00f3n\u00e9v",
+                    "verify_ssl": "Vez\u00e9rl\u0151 megfelel\u0151 tan\u00fas\u00edtv\u00e1nnyal"
+                },
+                "title": "UniFi vez\u00e9rl\u0151 be\u00e1ll\u00edt\u00e1sa"
             }
-        }
+        },
+        "title": "UniFi Vez\u00e9rl\u0151"
     }
 }
\ No newline at end of file
diff --git a/homeassistant/components/unifi/.translations/it.json b/homeassistant/components/unifi/.translations/it.json
new file mode 100644
index 00000000000..407371bf89f
--- /dev/null
+++ b/homeassistant/components/unifi/.translations/it.json
@@ -0,0 +1,26 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "Il sito del Controller \u00e8 gi\u00e0 configurato",
+            "user_privilege": "L'utente deve essere amministratore"
+        },
+        "error": {
+            "faulty_credentials": "Credenziali utente non valide",
+            "service_unavailable": "Servizio non disponibile"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "host": "Host",
+                    "password": "Password",
+                    "port": "Porta",
+                    "site": "ID del sito",
+                    "username": "Nome utente",
+                    "verify_ssl": "Il Controller sta utilizzando il certificato corretto"
+                },
+                "title": "Configura l'UniFi Controller"
+            }
+        },
+        "title": "UniFi Controller"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/upnp/.translations/es-419.json b/homeassistant/components/upnp/.translations/es-419.json
new file mode 100644
index 00000000000..bd95b48359e
--- /dev/null
+++ b/homeassistant/components/upnp/.translations/es-419.json
@@ -0,0 +1,30 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "UPnP/IGD ya est\u00e1 configurado",
+            "incomplete_device": "Ignorar un dispositivo UPnP incompleto",
+            "no_devices_discovered": "No se han descubierto UPnP/IGDs",
+            "no_devices_found": "No se encuentran dispositivos UPnP/IGD en la red.",
+            "no_sensors_or_port_mapping": "Habilitar al menos sensores o mapeo de puertos",
+            "single_instance_allowed": "S\u00f3lo se necesita una \u00fanica configuraci\u00f3n de UPnP/IGD."
+        },
+        "step": {
+            "confirm": {
+                "description": "\u00bfDesea configurar UPnP/IGD?",
+                "title": "UPnP/IGD"
+            },
+            "init": {
+                "title": "UPnP/IGD"
+            },
+            "user": {
+                "data": {
+                    "enable_port_mapping": "Habilitar la asignaci\u00f3n de puertos para Home Assistant",
+                    "enable_sensors": "A\u00f1adir sensores de tr\u00e1fico",
+                    "igd": "UPnP/IGD"
+                },
+                "title": "Opciones de configuraci\u00f3n para UPnP/IGD"
+            }
+        },
+        "title": "UPnP/IGD"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/upnp/.translations/hu.json b/homeassistant/components/upnp/.translations/hu.json
index f2fd380b1e3..7d3827e76da 100644
--- a/homeassistant/components/upnp/.translations/hu.json
+++ b/homeassistant/components/upnp/.translations/hu.json
@@ -1,7 +1,11 @@
 {
     "config": {
         "abort": {
-            "no_devices_found": "Nincsenek UPnPIGD eszk\u00f6z\u00f6k a h\u00e1l\u00f3zaton."
+            "already_configured": "Az UPnP / IGD m\u00e1r konfigur\u00e1l\u00e1sra ker\u00fclt",
+            "incomplete_device": "A hi\u00e1nyos UPnP-eszk\u00f6z figyelmen k\u00edv\u00fcl hagy\u00e1sa",
+            "no_devices_discovered": "Nem tal\u00e1ltam UPnP / IGD-ket",
+            "no_devices_found": "Nincsenek UPnPIGD eszk\u00f6z\u00f6k a h\u00e1l\u00f3zaton.",
+            "single_instance_allowed": "Csak egy UPnP / IGD konfigur\u00e1ci\u00f3 sz\u00fcks\u00e9ges."
         },
         "error": {
             "one": "hiba",
@@ -17,6 +21,7 @@
             },
             "user": {
                 "data": {
+                    "enable_port_mapping": "Enged\u00e9lyezd a port mappinget a Home Assistant sz\u00e1m\u00e1ra",
                     "enable_sensors": "Forgalom \u00e9rz\u00e9kel\u0151k hozz\u00e1ad\u00e1sa",
                     "igd": "UPnP/IGD"
                 },
diff --git a/homeassistant/components/upnp/.translations/it.json b/homeassistant/components/upnp/.translations/it.json
new file mode 100644
index 00000000000..798f6578093
--- /dev/null
+++ b/homeassistant/components/upnp/.translations/it.json
@@ -0,0 +1,30 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "UPnP/IGD \u00e8 gi\u00e0 configurato",
+            "incomplete_device": "Ignorare il dispositivo UPnP incompleto",
+            "no_devices_discovered": "Nessun UPnP/IGD trovato",
+            "no_devices_found": "Nessun dispositivo UPnP/IGD trovato in rete.",
+            "no_sensors_or_port_mapping": "Abilita almeno i sensori o la mappatura delle porte",
+            "single_instance_allowed": "\u00c8 necessaria una sola configurazione di UPnP/IGD."
+        },
+        "step": {
+            "confirm": {
+                "description": "Vuoi configurare UPnP/IGD?",
+                "title": "UPnP/IGD"
+            },
+            "init": {
+                "title": "UPnP/IGD"
+            },
+            "user": {
+                "data": {
+                    "enable_port_mapping": "Abilita il port mapping per Home Assistant",
+                    "enable_sensors": "Aggiungi sensori di traffico",
+                    "igd": "UPnP/IGD"
+                },
+                "title": "Opzioni di configurazione per UPnP/IGD"
+            }
+        },
+        "title": "UPnP/IGD"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/upnp/.translations/ko.json b/homeassistant/components/upnp/.translations/ko.json
index d38d5be58ba..9fa37e1236d 100644
--- a/homeassistant/components/upnp/.translations/ko.json
+++ b/homeassistant/components/upnp/.translations/ko.json
@@ -8,9 +8,6 @@
             "no_sensors_or_port_mapping": "\ucd5c\uc18c\ud55c \uc13c\uc11c \ud639\uc740 \ud3ec\ud2b8 \ub9e4\ud551\uc744 \ud65c\uc131\ud654 \ud574\uc57c \ud569\ub2c8\ub2e4",
             "single_instance_allowed": "\ud558\ub098\uc758 UPnP/IGD \ub9cc \uad6c\uc131 \ud560 \uc218 \uc788\uc2b5\ub2c8\ub2e4."
         },
-        "error": {
-            "other": "\ub2e4\ub978"
-        },
         "step": {
             "confirm": {
                 "description": "UPnP/IGD \ub97c \uc124\uc815 \ud558\uc2dc\uaca0\uc2b5\ub2c8\uae4c?",
diff --git a/homeassistant/components/zha/.translations/es-419.json b/homeassistant/components/zha/.translations/es-419.json
new file mode 100644
index 00000000000..0047c762a9d
--- /dev/null
+++ b/homeassistant/components/zha/.translations/es-419.json
@@ -0,0 +1,20 @@
+{
+    "config": {
+        "abort": {
+            "single_instance_allowed": "S\u00f3lo se permite una \u00fanica configuraci\u00f3n de ZHA."
+        },
+        "error": {
+            "cannot_connect": "No se puede conectar al dispositivo ZHA."
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "radio_type": "Tipo de radio",
+                    "usb_path": "Ruta del dispositivo USB"
+                },
+                "title": "ZHA"
+            }
+        },
+        "title": "ZHA"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/zha/.translations/hu.json b/homeassistant/components/zha/.translations/hu.json
index 11b2a9fc833..39c00a4dee3 100644
--- a/homeassistant/components/zha/.translations/hu.json
+++ b/homeassistant/components/zha/.translations/hu.json
@@ -12,6 +12,7 @@
                     "radio_type": "R\u00e1di\u00f3 t\u00edpusa",
                     "usb_path": "USB eszk\u00f6z el\u00e9r\u00e9si \u00fat"
                 },
+                "description": "\u00dcres",
                 "title": "ZHA"
             }
         },
diff --git a/homeassistant/components/zha/.translations/it.json b/homeassistant/components/zha/.translations/it.json
new file mode 100644
index 00000000000..e4b87c9d7b6
--- /dev/null
+++ b/homeassistant/components/zha/.translations/it.json
@@ -0,0 +1,20 @@
+{
+    "config": {
+        "abort": {
+            "single_instance_allowed": "\u00c8 consentita solo una singola configurazione di ZHA."
+        },
+        "error": {
+            "cannot_connect": "Impossibile connettersi al dispositivo ZHA."
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "radio_type": "Tipo di Radio",
+                    "usb_path": "Percorso del dispositivo USB"
+                },
+                "title": "ZHA"
+            }
+        },
+        "title": "ZHA"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/zwave/.translations/es-419.json b/homeassistant/components/zwave/.translations/es-419.json
new file mode 100644
index 00000000000..2e246fb9931
--- /dev/null
+++ b/homeassistant/components/zwave/.translations/es-419.json
@@ -0,0 +1,19 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "Z-Wave ya est\u00e1 configurado",
+            "one_instance_only": "El componente solo admite una instancia de Z-Wave"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "network_key": "Clave de red (dejar en blanco para auto-generar)",
+                    "usb_path": "Ruta USB"
+                },
+                "description": "Consulte https://www.home-assistant.io/docs/z-wave/installation/ para obtener informaci\u00f3n sobre las variables de configuraci\u00f3n",
+                "title": "Configurar Z-Wave"
+            }
+        },
+        "title": "Z-Wave"
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/zwave/.translations/hu.json b/homeassistant/components/zwave/.translations/hu.json
index e326c5152a6..2842c535984 100644
--- a/homeassistant/components/zwave/.translations/hu.json
+++ b/homeassistant/components/zwave/.translations/hu.json
@@ -1,7 +1,11 @@
 {
     "config": {
         "abort": {
-            "already_configured": "A Z-Wave m\u00e1r konfigur\u00e1lva van"
+            "already_configured": "A Z-Wave m\u00e1r konfigur\u00e1lva van",
+            "one_instance_only": "Az \u00f6sszetev\u0151 csak egy Z-Wave p\u00e9ld\u00e1nyt t\u00e1mogat"
+        },
+        "error": {
+            "option_error": "A Z-Wave \u00e9rv\u00e9nyes\u00edt\u00e9s sikertelen. Az USB-meghajt\u00f3 el\u00e9r\u00e9si \u00fatj\u00e1t helyesen adtad meg?"
         },
         "step": {
             "user": {
diff --git a/homeassistant/components/zwave/.translations/it.json b/homeassistant/components/zwave/.translations/it.json
index 86a61307814..c380d8e5625 100644
--- a/homeassistant/components/zwave/.translations/it.json
+++ b/homeassistant/components/zwave/.translations/it.json
@@ -1,5 +1,12 @@
 {
     "config": {
+        "abort": {
+            "already_configured": "Z-Wave \u00e8 gi\u00e0 configurato",
+            "one_instance_only": "Il componente supporta solo un'istanza di Z-Wave"
+        },
+        "error": {
+            "option_error": "Convalida Z-Wave fallita. Il percorso della chiavetta USB \u00e8 corretto?"
+        },
         "step": {
             "user": {
                 "data": {
@@ -7,7 +14,7 @@
                     "usb_path": "Percorso USB"
                 },
                 "description": "Vai su https://www.home-assistant.io/docs/z-wave/installation/ per le informazioni sulle variabili di configurazione",
-                "title": "Imposta Z-Wave"
+                "title": "Configura Z-Wave"
             }
         },
         "title": "Z-Wave"