diff --git a/.coveragerc b/.coveragerc
index c83b72ddf52..57c3d89d647 100644
--- a/.coveragerc
+++ b/.coveragerc
@@ -44,6 +44,9 @@ omit =
     homeassistant/components/nest.py
     homeassistant/components/*/nest.py
 
+    homeassistant/components/rpi_gpio.py
+    homeassistant/components/*/rpi_gpio.py
+
     homeassistant/components/binary_sensor/arest.py
     homeassistant/components/binary_sensor/rest.py
     homeassistant/components/browser.py
@@ -104,7 +107,6 @@ omit =
     homeassistant/components/sensor/netatmo.py
     homeassistant/components/sensor/openweathermap.py
     homeassistant/components/sensor/rest.py
-    homeassistant/components/sensor/rpi_gpio.py
     homeassistant/components/sensor/sabnzbd.py
     homeassistant/components/sensor/swiss_public_transport.py
     homeassistant/components/sensor/systemmonitor.py
@@ -120,7 +122,6 @@ omit =
     homeassistant/components/switch/mystrom.py
     homeassistant/components/switch/orvibo.py
     homeassistant/components/switch/rest.py
-    homeassistant/components/switch/rpi_gpio.py
     homeassistant/components/switch/transmission.py
     homeassistant/components/switch/wemo.py
     homeassistant/components/thermostat/heatmiser.py
diff --git a/homeassistant/components/alarm_control_panel/alarmdotcom.py b/homeassistant/components/alarm_control_panel/alarmdotcom.py
index bdd77135ac1..7f76680feb7 100644
--- a/homeassistant/components/alarm_control_panel/alarmdotcom.py
+++ b/homeassistant/components/alarm_control_panel/alarmdotcom.py
@@ -52,6 +52,8 @@ class AlarmDotCom(alarm.AlarmControlPanel):
         self._hass = hass
         self._name = name
         self._code = str(code) if code else None
+        self._username = username
+        self._password = password
 
     @property
     def should_poll(self):
@@ -82,21 +84,30 @@ class AlarmDotCom(alarm.AlarmControlPanel):
         """ Send disarm command. """
         if not self._validate_code(code, 'arming home'):
             return
-        self._alarm.disarm()
+        from pyalarmdotcom.pyalarmdotcom import Alarmdotcom
+        # Open another session to alarm.com to fire off the command
+        _alarm = Alarmdotcom(self._username, self._password, timeout=10)
+        _alarm.disarm()
         self.update_ha_state()
 
     def alarm_arm_home(self, code=None):
         """ Send arm home command. """
         if not self._validate_code(code, 'arming home'):
             return
-        self._alarm.arm_stay()
+        from pyalarmdotcom.pyalarmdotcom import Alarmdotcom
+        # Open another session to alarm.com to fire off the command
+        _alarm = Alarmdotcom(self._username, self._password, timeout=10)
+        _alarm.arm_stay()
         self.update_ha_state()
 
     def alarm_arm_away(self, code=None):
         """ Send arm away command. """
         if not self._validate_code(code, 'arming home'):
             return
-        self._alarm.arm_away()
+        from pyalarmdotcom.pyalarmdotcom import Alarmdotcom
+        # Open another session to alarm.com to fire off the command
+        _alarm = Alarmdotcom(self._username, self._password, timeout=10)
+        _alarm.arm_away()
         self.update_ha_state()
 
     def _validate_code(self, code, state):
diff --git a/homeassistant/components/alarm_control_panel/verisure.py b/homeassistant/components/alarm_control_panel/verisure.py
index ea48209a0fd..ecedd163d0b 100644
--- a/homeassistant/components/alarm_control_panel/verisure.py
+++ b/homeassistant/components/alarm_control_panel/verisure.py
@@ -57,7 +57,7 @@ class VerisureAlarm(alarm.AlarmControlPanel):
     @property
     def code_format(self):
         """ Four digit code required. """
-        return '^\\d{4}$'
+        return '^\\d{%s}$' % verisure.CODE_DIGITS
 
     def update(self):
         """ Update alarm status """
diff --git a/homeassistant/components/binary_sensor/nest.py b/homeassistant/components/binary_sensor/nest.py
index 1150e9cc682..e1414de5648 100644
--- a/homeassistant/components/binary_sensor/nest.py
+++ b/homeassistant/components/binary_sensor/nest.py
@@ -46,7 +46,7 @@ def setup_platform(hass, config, add_devices, discovery_info=None):
         )
 
 
-class NestBinarySensor(BinarySensorDevice, NestSensor):
+class NestBinarySensor(NestSensor, BinarySensorDevice):
     """ Represents a Nst Binary sensor. """
 
     @property
diff --git a/homeassistant/components/binary_sensor/rpi_gpio.py b/homeassistant/components/binary_sensor/rpi_gpio.py
new file mode 100644
index 00000000000..2bb50fec766
--- /dev/null
+++ b/homeassistant/components/binary_sensor/rpi_gpio.py
@@ -0,0 +1,73 @@
+"""
+homeassistant.components.binary_sensor.rpi_gpio
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Allows to configure a binary_sensor using RPi GPIO.
+
+For more details about this platform, please refer to the documentation at
+https://home-assistant.io/components/binary_sensor.rpi_gpio/
+"""
+
+import logging
+import homeassistant.components.rpi_gpio as rpi_gpio
+from homeassistant.components.binary_sensor import BinarySensorDevice
+from homeassistant.const import (DEVICE_DEFAULT_NAME)
+
+DEFAULT_PULL_MODE = "UP"
+DEFAULT_BOUNCETIME = 50
+DEFAULT_INVERT_LOGIC = False
+
+DEPENDENCIES = ['rpi_gpio']
+_LOGGER = logging.getLogger(__name__)
+
+
+# pylint: disable=unused-argument
+def setup_platform(hass, config, add_devices, discovery_info=None):
+    """ Sets up the Raspberry PI GPIO devices. """
+
+    pull_mode = config.get('pull_mode', DEFAULT_PULL_MODE)
+    bouncetime = config.get('bouncetime', DEFAULT_BOUNCETIME)
+    invert_logic = config.get('invert_logic', DEFAULT_INVERT_LOGIC)
+
+    binary_sensors = []
+    ports = config.get('ports')
+    for port_num, port_name in ports.items():
+        binary_sensors.append(RPiGPIOBinarySensor(
+            port_name, port_num, pull_mode, bouncetime, invert_logic))
+    add_devices(binary_sensors)
+
+
+# pylint: disable=too-many-arguments, too-many-instance-attributes
+class RPiGPIOBinarySensor(BinarySensorDevice):
+    """ Represents a binary sensor that uses Raspberry Pi GPIO. """
+    def __init__(self, name, port, pull_mode, bouncetime, invert_logic):
+        # pylint: disable=no-member
+
+        self._name = name or DEVICE_DEFAULT_NAME
+        self._port = port
+        self._pull_mode = pull_mode
+        self._bouncetime = bouncetime
+        self._invert_logic = invert_logic
+
+        rpi_gpio.setup_input(self._port, self._pull_mode)
+        self._state = rpi_gpio.read_input(self._port)
+
+        def read_gpio(port):
+            """ Reads state from GPIO. """
+            self._state = rpi_gpio.read_input(self._port)
+            self.update_ha_state()
+        rpi_gpio.edge_detect(self._port, read_gpio, self._bouncetime)
+
+    @property
+    def should_poll(self):
+        """ No polling needed. """
+        return False
+
+    @property
+    def name(self):
+        """ The name of the sensor. """
+        return self._name
+
+    @property
+    def is_on(self):
+        """ Returns the state of the entity. """
+        return self._state != self._invert_logic
diff --git a/homeassistant/components/device_tracker/locative.py b/homeassistant/components/device_tracker/locative.py
index e7532d1075d..11884829600 100644
--- a/homeassistant/components/device_tracker/locative.py
+++ b/homeassistant/components/device_tracker/locative.py
@@ -49,10 +49,9 @@ def _handle_get_api_locative(hass, see, handler, path_match, data):
         handler.write_text("Setting location to {}".format(location_name))
 
     elif direction == 'exit':
-        current_state = hass.states.get(
-            "{}.{}".format(DOMAIN, device)).state
+        current_state = hass.states.get("{}.{}".format(DOMAIN, device))
 
-        if current_state == location_name:
+        if current_state is None or current_state.state == location_name:
             see(dev_id=device, location_name=STATE_NOT_HOME)
             handler.write_text("Setting location to not home")
         else:
diff --git a/homeassistant/components/http.py b/homeassistant/components/http.py
index 35c215a8630..073604e3b2c 100644
--- a/homeassistant/components/http.py
+++ b/homeassistant/components/http.py
@@ -112,10 +112,10 @@ class HomeAssistantHTTPServer(ThreadingMixIn, HTTPServer):
             _LOGGER.info("running http in development mode")
 
         if ssl_certificate is not None:
-            wrap_kwargs = {'certfile': ssl_certificate}
-            if ssl_key is not None:
-                wrap_kwargs['keyfile'] = ssl_key
-            self.socket = ssl.wrap_socket(self.socket, **wrap_kwargs)
+            context = ssl.create_default_context(
+                purpose=ssl.Purpose.CLIENT_AUTH)
+            context.load_cert_chain(ssl_certificate, keyfile=ssl_key)
+            self.socket = context.wrap_socket(self.socket, server_side=True)
 
     def start(self):
         """ Starts the HTTP server. """
diff --git a/homeassistant/components/input_boolean.py b/homeassistant/components/input_boolean.py
new file mode 100644
index 00000000000..f86fffcaeb6
--- /dev/null
+++ b/homeassistant/components/input_boolean.py
@@ -0,0 +1,124 @@
+"""
+Component to keep track of user controlled booleans for within automation.
+
+For more details about this component, please refer to the documentation
+at https://home-assistant.io/components/input_boolean/
+"""
+import logging
+
+from homeassistant.const import (
+    STATE_ON, SERVICE_TURN_ON, SERVICE_TURN_OFF, ATTR_ENTITY_ID)
+from homeassistant.helpers.entity_component import EntityComponent
+from homeassistant.helpers.entity import ToggleEntity
+from homeassistant.util import slugify
+
+DOMAIN = 'input_boolean'
+
+ENTITY_ID_FORMAT = DOMAIN + '.{}'
+
+_LOGGER = logging.getLogger(__name__)
+
+CONF_NAME = "name"
+CONF_INITIAL = "initial"
+CONF_ICON = "icon"
+
+
+def is_on(hass, entity_id):
+    """Test if input_boolean is True."""
+    return hass.states.is_state(entity_id, STATE_ON)
+
+
+def turn_on(hass, entity_id):
+    """Set input_boolean to True."""
+    hass.services.call(DOMAIN, SERVICE_TURN_ON, {ATTR_ENTITY_ID: entity_id})
+
+
+def turn_off(hass, entity_id):
+    """Set input_boolean to False."""
+    hass.services.call(DOMAIN, SERVICE_TURN_OFF, {ATTR_ENTITY_ID: entity_id})
+
+
+def setup(hass, config):
+    """Set up input booleans."""
+    if not isinstance(config.get(DOMAIN), dict):
+        _LOGGER.error('Expected %s config to be a dictionary', DOMAIN)
+        return False
+
+    component = EntityComponent(_LOGGER, DOMAIN, hass)
+
+    entities = []
+
+    for object_id, cfg in config[DOMAIN].items():
+        if object_id != slugify(object_id):
+            _LOGGER.warning("Found invalid key for boolean input: %s. "
+                            "Use %s instead", object_id, slugify(object_id))
+            continue
+        if not cfg:
+            cfg = {}
+
+        name = cfg.get(CONF_NAME)
+        state = cfg.get(CONF_INITIAL, False)
+        icon = cfg.get(CONF_ICON)
+
+        entities.append(InputBoolean(object_id, name, state, icon))
+
+    if not entities:
+        return False
+
+    def toggle_service(service):
+        """Handle a calls to the input boolean services."""
+        target_inputs = component.extract_from_service(service)
+
+        for input_b in target_inputs:
+            if service.service == SERVICE_TURN_ON:
+                input_b.turn_on()
+            else:
+                input_b.turn_off()
+
+    hass.services.register(DOMAIN, SERVICE_TURN_OFF, toggle_service)
+    hass.services.register(DOMAIN, SERVICE_TURN_ON, toggle_service)
+
+    component.add_entities(entities)
+
+    return True
+
+
+class InputBoolean(ToggleEntity):
+    """Represent a boolean input within Home Assistant."""
+
+    def __init__(self, object_id, name, state, icon):
+        """Initialize a boolean input."""
+        self.entity_id = ENTITY_ID_FORMAT.format(object_id)
+        self._name = name
+        self._state = state
+        self._icon = icon
+
+    @property
+    def should_poll(self):
+        """If entitiy should be polled."""
+        return False
+
+    @property
+    def name(self):
+        """Name of the boolean input."""
+        return self._name
+
+    @property
+    def icon(self):
+        """Icon to be used for this entity."""
+        return self._icon
+
+    @property
+    def is_on(self):
+        """True if entity is on."""
+        return self._state
+
+    def turn_on(self, **kwargs):
+        """Turn the entity on."""
+        self._state = True
+        self.update_ha_state()
+
+    def turn_off(self, **kwargs):
+        """Turn the entity off."""
+        self._state = False
+        self.update_ha_state()
diff --git a/homeassistant/components/light/vera.py b/homeassistant/components/light/vera.py
index 42a5e7b7899..46b4e7c7da8 100644
--- a/homeassistant/components/light/vera.py
+++ b/homeassistant/components/light/vera.py
@@ -15,7 +15,7 @@ from homeassistant.components.light import ATTR_BRIGHTNESS
 
 from homeassistant.const import EVENT_HOMEASSISTANT_STOP, STATE_ON
 
-REQUIREMENTS = ['pyvera==0.2.3']
+REQUIREMENTS = ['pyvera==0.2.7']
 
 _LOGGER = logging.getLogger(__name__)
 
@@ -86,4 +86,4 @@ class VeraLight(VeraSwitch):
             self.vera_device.switch_on()
 
         self._state = STATE_ON
-        self.update_ha_state()
+        self.update_ha_state(True)
diff --git a/homeassistant/components/rpi_gpio.py b/homeassistant/components/rpi_gpio.py
new file mode 100644
index 00000000000..3d0a068f8ca
--- /dev/null
+++ b/homeassistant/components/rpi_gpio.py
@@ -0,0 +1,69 @@
+"""
+homeassistant.components.rpi_gpio
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Allows to control the GPIO pins of a Raspberry Pi.
+
+For more details about this platform, please refer to the documentation at
+https://home-assistant.io/components/rpi_gpio/
+"""
+
+import logging
+try:
+    import RPi.GPIO as GPIO
+except ImportError:
+    GPIO = None
+from homeassistant.const import (EVENT_HOMEASSISTANT_START,
+                                 EVENT_HOMEASSISTANT_STOP)
+REQUIREMENTS = ['RPi.GPIO==0.6.1']
+DOMAIN = "rpi_gpio"
+_LOGGER = logging.getLogger(__name__)
+
+
+# pylint: disable=no-member
+def setup(hass, config):
+    """ Sets up the Raspberry PI GPIO component. """
+    if GPIO is None:
+        _LOGGER.error('RPi.GPIO not available. rpi_gpio ports ignored.')
+        return False
+
+    def cleanup_gpio(event):
+        """ Stuff to do before stop home assistant. """
+        GPIO.cleanup()
+
+    def prepare_gpio(event):
+        """ Stuff to do when home assistant starts. """
+        hass.bus.listen_once(EVENT_HOMEASSISTANT_STOP, cleanup_gpio)
+
+    hass.bus.listen_once(EVENT_HOMEASSISTANT_START, prepare_gpio)
+    GPIO.setmode(GPIO.BCM)
+    return True
+
+
+def setup_output(port):
+    """ Setup a GPIO as output. """
+    GPIO.setup(port, GPIO.OUT)
+
+
+def setup_input(port, pull_mode):
+    """ Setup a GPIO as input. """
+    GPIO.setup(port, GPIO.IN,
+               GPIO.PUD_DOWN if pull_mode == 'DOWN' else GPIO.PUD_UP)
+
+
+def write_output(port, value):
+    """ Write a value to a GPIO. """
+    GPIO.output(port, value)
+
+
+def read_input(port):
+    """ Read a value from a GPIO. """
+    return GPIO.input(port)
+
+
+def edge_detect(port, event_callback, bounce):
+    """ Adds detection for RISING and FALLING events. """
+    GPIO.add_event_detect(
+        port,
+        GPIO.BOTH,
+        callback=event_callback,
+        bouncetime=bounce)
diff --git a/homeassistant/components/script.py b/homeassistant/components/script.py
index 3e13db66699..238bea7dd4c 100644
--- a/homeassistant/components/script.py
+++ b/homeassistant/components/script.py
@@ -81,7 +81,7 @@ def setup(hass, config):
                             object_id)
             continue
         alias = cfg.get(CONF_ALIAS, object_id)
-        script = Script(hass, object_id, alias, cfg[CONF_SEQUENCE])
+        script = Script(object_id, alias, cfg[CONF_SEQUENCE])
         component.add_entities((script,))
         hass.services.register(DOMAIN, object_id, service_handler)
 
@@ -106,8 +106,7 @@ def setup(hass, config):
 class Script(ToggleEntity):
     """ Represents a script. """
     # pylint: disable=too-many-instance-attributes
-    def __init__(self, hass, object_id, name, sequence):
-        self.hass = hass
+    def __init__(self, object_id, name, sequence):
         self.entity_id = ENTITY_ID_FORMAT.format(object_id)
         self._name = name
         self.sequence = sequence
diff --git a/homeassistant/components/sensor/nest.py b/homeassistant/components/sensor/nest.py
index ed8052b23d8..578c80e3c0f 100644
--- a/homeassistant/components/sensor/nest.py
+++ b/homeassistant/components/sensor/nest.py
@@ -38,7 +38,7 @@ def setup_platform(hass, config, add_devices, discovery_info=None):
             for device in structure.devices:
                 for variable in config['monitored_conditions']:
                     if variable in SENSOR_TYPES:
-                        add_devices([NestSensor(structure, device, variable)])
+                        add_devices([NestBasicSensor(structure, device, variable)])
                     elif variable in SENSOR_TEMP_TYPES:
                         add_devices([NestTempSensor(structure,
                                                     device,
@@ -76,6 +76,8 @@ class NestSensor(Entity):
                                          name,
                                          self.variable)
 
+
+class NestBasicSensor(NestSensor):
     @property
     def state(self):
         """ Returns the state of the sensor. """
@@ -87,7 +89,7 @@ class NestSensor(Entity):
         return SENSOR_UNITS.get(self.variable, None)
 
 
-class NestTempSensor(NestSensor):
+class NestTempSensor(NestBasicSensor):
     """ Represents a Nest Temperature sensor. """
 
     @property
diff --git a/homeassistant/components/sensor/rpi_gpio.py b/homeassistant/components/sensor/rpi_gpio.py
deleted file mode 100644
index ef7ea8c33c1..00000000000
--- a/homeassistant/components/sensor/rpi_gpio.py
+++ /dev/null
@@ -1,97 +0,0 @@
-"""
-homeassistant.components.sensor.rpi_gpio
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-Allows to configure a binary state sensor using RPi GPIO.
-
-For more details about this platform, please refer to the documentation at
-https://home-assistant.io/components/sensor.rpi_gpio/
-"""
-# pylint: disable=import-error
-import logging
-from homeassistant.helpers.entity import Entity
-
-from homeassistant.const import (DEVICE_DEFAULT_NAME,
-                                 EVENT_HOMEASSISTANT_START,
-                                 EVENT_HOMEASSISTANT_STOP)
-
-DEFAULT_PULL_MODE = "UP"
-DEFAULT_VALUE_HIGH = "HIGH"
-DEFAULT_VALUE_LOW = "LOW"
-DEFAULT_BOUNCETIME = 50
-
-REQUIREMENTS = ['RPi.GPIO==0.5.11']
-_LOGGER = logging.getLogger(__name__)
-
-
-# pylint: disable=unused-argument
-def setup_platform(hass, config, add_devices, discovery_info=None):
-    """ Sets up the Raspberry PI GPIO ports. """
-    import RPi.GPIO as GPIO
-    GPIO.setmode(GPIO.BCM)
-
-    sensors = []
-    pull_mode = config.get('pull_mode', DEFAULT_PULL_MODE)
-    value_high = config.get('value_high', DEFAULT_VALUE_HIGH)
-    value_low = config.get('value_low', DEFAULT_VALUE_LOW)
-    bouncetime = config.get('bouncetime', DEFAULT_BOUNCETIME)
-    ports = config.get('ports')
-    for port_num, port_name in ports.items():
-        sensors.append(RPiGPIOSensor(
-            port_name, port_num, pull_mode,
-            value_high, value_low, bouncetime))
-    add_devices(sensors)
-
-    def cleanup_gpio(event):
-        """ Stuff to do before stop home assistant. """
-        # pylint: disable=no-member
-        GPIO.cleanup()
-
-    def prepare_gpio(event):
-        """ Stuff to do when home assistant starts. """
-        hass.bus.listen_once(EVENT_HOMEASSISTANT_STOP, cleanup_gpio)
-
-    hass.bus.listen_once(EVENT_HOMEASSISTANT_START, prepare_gpio)
-
-
-# pylint: disable=too-many-arguments, too-many-instance-attributes
-class RPiGPIOSensor(Entity):
-    """ Sets up the Raspberry PI GPIO ports. """
-    def __init__(self, port_name, port_num, pull_mode,
-                 value_high, value_low, bouncetime):
-        # pylint: disable=no-member
-        import RPi.GPIO as GPIO
-        self._name = port_name or DEVICE_DEFAULT_NAME
-        self._port = port_num
-        self._pull = GPIO.PUD_DOWN if pull_mode == "DOWN" else GPIO.PUD_UP
-        self._vhigh = value_high
-        self._vlow = value_low
-        self._bouncetime = bouncetime
-        GPIO.setup(self._port, GPIO.IN, pull_up_down=self._pull)
-        self._state = self._vhigh if GPIO.input(self._port) else self._vlow
-
-        def edge_callback(channel):
-            """ port changed state """
-            # pylint: disable=no-member
-            self._state = self._vhigh if GPIO.input(channel) else self._vlow
-            self.update_ha_state()
-
-        GPIO.add_event_detect(
-            self._port,
-            GPIO.BOTH,
-            callback=edge_callback,
-            bouncetime=self._bouncetime)
-
-    @property
-    def should_poll(self):
-        """ No polling needed. """
-        return False
-
-    @property
-    def name(self):
-        """ The name of the sensor. """
-        return self._name
-
-    @property
-    def state(self):
-        """ Returns the state of the entity. """
-        return self._state
diff --git a/homeassistant/components/sensor/vera.py b/homeassistant/components/sensor/vera.py
index b381974ab31..c587764ae2e 100644
--- a/homeassistant/components/sensor/vera.py
+++ b/homeassistant/components/sensor/vera.py
@@ -15,7 +15,7 @@ from homeassistant.const import (
     ATTR_BATTERY_LEVEL, ATTR_TRIPPED, ATTR_ARMED, ATTR_LAST_TRIP_TIME,
     TEMP_CELCIUS, TEMP_FAHRENHEIT, EVENT_HOMEASSISTANT_STOP)
 
-REQUIREMENTS = ['pyvera==0.2.3']
+REQUIREMENTS = ['pyvera==0.2.7']
 
 _LOGGER = logging.getLogger(__name__)
 
@@ -45,7 +45,10 @@ def get_devices(hass, config):
 
         hass.bus.listen_once(EVENT_HOMEASSISTANT_STOP, stop_subscription)
 
-    categories = ['Temperature Sensor', 'Light Sensor', 'Sensor']
+    categories = ['Temperature Sensor',
+                  'Light Sensor',
+                  'Humidity Sensor',
+                  'Sensor']
     devices = []
     try:
         devices = vera_controller.get_devices(categories)
@@ -86,6 +89,7 @@ class VeraSensor(Entity):
         self._temperature_units = None
 
         self.controller.register(vera_device, self._update_callback)
+        self.update()
 
     def _update_callback(self, _device):
         """ Called by the vera device callback to update state. """
@@ -106,7 +110,12 @@ class VeraSensor(Entity):
     @property
     def unit_of_measurement(self):
         """ Unit of measurement of this entity, if any. """
-        return self._temperature_units
+        if self.vera_device.category == "Temperature Sensor":
+            return self._temperature_units
+        elif self.vera_device.category == "Light Sensor":
+            return 'lux'
+        elif self.vera_device.category == "Humidity Sensor":
+            return '%'
 
     @property
     def state_attributes(self):
@@ -115,19 +124,19 @@ class VeraSensor(Entity):
             attr[ATTR_BATTERY_LEVEL] = self.vera_device.battery_level + '%'
 
         if self.vera_device.is_armable:
-            armed = self.vera_device.get_value('Armed')
-            attr[ATTR_ARMED] = 'True' if armed == '1' else 'False'
+            armed = self.vera_device.is_armed
+            attr[ATTR_ARMED] = 'True' if armed else 'False'
 
         if self.vera_device.is_trippable:
-            last_tripped = self.vera_device.get_value('LastTrip')
+            last_tripped = self.vera_device.last_trip
             if last_tripped is not None:
                 utc_time = dt_util.utc_from_timestamp(int(last_tripped))
                 attr[ATTR_LAST_TRIP_TIME] = dt_util.datetime_to_str(
                     utc_time)
             else:
                 attr[ATTR_LAST_TRIP_TIME] = None
-            tripped = self.vera_device.get_value('Tripped')
-            attr[ATTR_TRIPPED] = 'True' if tripped == '1' else 'False'
+            tripped = self.vera_device.is_tripped
+            attr[ATTR_TRIPPED] = 'True' if tripped else 'False'
 
         attr['Vera Device Id'] = self.vera_device.vera_device_id
         return attr
@@ -139,8 +148,9 @@ class VeraSensor(Entity):
 
     def update(self):
         if self.vera_device.category == "Temperature Sensor":
-            current_temp = self.vera_device.get_value('CurrentTemperature')
-            vera_temp_units = self.vera_device.veraController.temperature_units
+            current_temp = self.vera_device.temperature
+            vera_temp_units = (
+                self.vera_device.vera_controller.temperature_units)
 
             if vera_temp_units == 'F':
                 self._temperature_units = TEMP_FAHRENHEIT
@@ -156,9 +166,11 @@ class VeraSensor(Entity):
 
             self.current_value = current_temp
         elif self.vera_device.category == "Light Sensor":
-            self.current_value = self.vera_device.get_value('CurrentLevel')
+            self.current_value = self.vera_device.light
+        elif self.vera_device.category == "Humidity Sensor":
+            self.current_value = self.vera_device.humidity
         elif self.vera_device.category == "Sensor":
-            tripped = self.vera_device.get_value('Tripped')
-            self.current_value = 'Tripped' if tripped == '1' else 'Not Tripped'
+            tripped = self.vera_device.is_tripped
+            self.current_value = 'Tripped' if tripped else 'Not Tripped'
         else:
             self.current_value = 'Unknown'
diff --git a/homeassistant/components/switch/rpi_gpio.py b/homeassistant/components/switch/rpi_gpio.py
index 1c36aa262f4..dffa4682279 100644
--- a/homeassistant/components/switch/rpi_gpio.py
+++ b/homeassistant/components/switch/rpi_gpio.py
@@ -1,69 +1,48 @@
 """
 homeassistant.components.switch.rpi_gpio
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-Allows to control the GPIO pins of a Raspberry Pi.
+Allows to configure a switch using RPi GPIO.
 
 For more details about this platform, please refer to the documentation at
 https://home-assistant.io/components/switch.rpi_gpio/
 """
+
 import logging
-try:
-    import RPi.GPIO as GPIO
-except ImportError:
-    GPIO = None
+import homeassistant.components.rpi_gpio as rpi_gpio
 from homeassistant.helpers.entity import ToggleEntity
-from homeassistant.const import (DEVICE_DEFAULT_NAME,
-                                 EVENT_HOMEASSISTANT_START,
-                                 EVENT_HOMEASSISTANT_STOP)
+from homeassistant.const import (DEVICE_DEFAULT_NAME)
 
 DEFAULT_INVERT_LOGIC = False
 
-REQUIREMENTS = ['RPi.GPIO==0.5.11']
+DEPENDENCIES = ['rpi_gpio']
 _LOGGER = logging.getLogger(__name__)
 
 
 # pylint: disable=unused-argument
 def setup_platform(hass, config, add_devices, discovery_info=None):
-    """ Sets up the Raspberry PI GPIO ports. """
-    if GPIO is None:
-        _LOGGER.error('RPi.GPIO not available. rpi_gpio ports ignored.')
-        return
-    # pylint: disable=no-member
-    GPIO.setmode(GPIO.BCM)
+    """ Sets up the Raspberry PI GPIO devices. """
+
+    invert_logic = config.get('invert_logic', DEFAULT_INVERT_LOGIC)
 
     switches = []
-    invert_logic = config.get('invert_logic', DEFAULT_INVERT_LOGIC)
     ports = config.get('ports')
-    for port_num, port_name in ports.items():
-        switches.append(RPiGPIOSwitch(port_name, port_num, invert_logic))
+    for port, name in ports.items():
+        switches.append(RPiGPIOSwitch(name, port, invert_logic))
     add_devices(switches)
 
-    def cleanup_gpio(event):
-        """ Stuff to do before stop home assistant. """
-        # pylint: disable=no-member
-        GPIO.cleanup()
-
-    def prepare_gpio(event):
-        """ Stuff to do when home assistant starts. """
-        hass.bus.listen_once(EVENT_HOMEASSISTANT_STOP, cleanup_gpio)
-
-    hass.bus.listen_once(EVENT_HOMEASSISTANT_START, prepare_gpio)
-
 
 class RPiGPIOSwitch(ToggleEntity):
-    """ Represents a port that can be toggled using Raspberry Pi GPIO. """
-
-    def __init__(self, name, gpio, invert_logic):
+    """ Represents a switch that can be toggled using Raspberry Pi GPIO. """
+    def __init__(self, name, port, invert_logic):
         self._name = name or DEVICE_DEFAULT_NAME
-        self._gpio = gpio
-        self._active_state = not invert_logic
-        self._state = not self._active_state
-        # pylint: disable=no-member
-        GPIO.setup(gpio, GPIO.OUT)
+        self._port = port
+        self._invert_logic = invert_logic
+        self._state = False
+        rpi_gpio.setup_output(self._port)
 
     @property
     def name(self):
-        """ The name of the port. """
+        """ The name of the switch. """
         return self._name
 
     @property
@@ -76,41 +55,14 @@ class RPiGPIOSwitch(ToggleEntity):
         """ True if device is on. """
         return self._state
 
-    def turn_on(self, **kwargs):
+    def turn_on(self):
         """ Turn the device on. """
-        if self._switch(self._active_state):
-            self._state = True
+        rpi_gpio.write_output(self._port, 0 if self._invert_logic else 1)
+        self._state = True
         self.update_ha_state()
 
-    def turn_off(self, **kwargs):
+    def turn_off(self):
         """ Turn the device off. """
-        if self._switch(not self._active_state):
-            self._state = False
+        rpi_gpio.write_output(self._port, 1 if self._invert_logic else 0)
+        self._state = False
         self.update_ha_state()
-
-    def _switch(self, new_state):
-        """ Change the output value to Raspberry Pi GPIO port. """
-        _LOGGER.info('Setting GPIO %s to %s', self._gpio, new_state)
-        # pylint: disable=bare-except
-        try:
-            # pylint: disable=no-member
-            GPIO.output(self._gpio, 1 if new_state else 0)
-        except:
-            _LOGGER.error('GPIO "%s" output failed', self._gpio)
-            return False
-        return True
-
-    # pylint: disable=no-self-use
-    @property
-    def device_state_attributes(self):
-        """ Returns device specific state attributes. """
-        return None
-
-    @property
-    def state_attributes(self):
-        """ Returns optional state attributes. """
-        data = {}
-        device_attr = self.device_state_attributes
-        if device_attr is not None:
-            data.update(device_attr)
-        return data
diff --git a/homeassistant/components/switch/vera.py b/homeassistant/components/switch/vera.py
index 4094fe61f4f..3626175c03c 100644
--- a/homeassistant/components/switch/vera.py
+++ b/homeassistant/components/switch/vera.py
@@ -21,7 +21,7 @@ from homeassistant.const import (
     STATE_ON,
     STATE_OFF)
 
-REQUIREMENTS = ['pyvera==0.2.3']
+REQUIREMENTS = ['pyvera==0.2.7']
 
 _LOGGER = logging.getLogger(__name__)
 
@@ -91,14 +91,10 @@ class VeraSwitch(SwitchDevice):
         self._state = STATE_OFF
 
         self.controller.register(vera_device, self._update_callback)
+        self.update()
 
     def _update_callback(self, _device):
-        """ Called by the vera device callback to update state. """
-        if self.vera_device.is_switched_on():
-            self._state = STATE_ON
-        else:
-            self._state = STATE_OFF
-        self.update_ha_state()
+        self.update_ha_state(True)
 
     @property
     def name(self):
@@ -113,19 +109,19 @@ class VeraSwitch(SwitchDevice):
             attr[ATTR_BATTERY_LEVEL] = self.vera_device.battery_level + '%'
 
         if self.vera_device.is_armable:
-            armed = self.vera_device.get_value('Armed')
-            attr[ATTR_ARMED] = 'True' if armed == '1' else 'False'
+            armed = self.vera_device.is_armed
+            attr[ATTR_ARMED] = 'True' if armed else 'False'
 
         if self.vera_device.is_trippable:
-            last_tripped = self.vera_device.get_value('LastTrip')
+            last_tripped = self.vera_device.last_trip
             if last_tripped is not None:
                 utc_time = dt_util.utc_from_timestamp(int(last_tripped))
                 attr[ATTR_LAST_TRIP_TIME] = dt_util.datetime_to_str(
                     utc_time)
             else:
                 attr[ATTR_LAST_TRIP_TIME] = None
-            tripped = self.vera_device.get_value('Tripped')
-            attr[ATTR_TRIPPED] = 'True' if tripped == '1' else 'False'
+            tripped = self.vera_device.is_tripped
+            attr[ATTR_TRIPPED] = 'True' if tripped else 'False'
 
         attr['Vera Device Id'] = self.vera_device.vera_device_id
 
@@ -150,3 +146,10 @@ class VeraSwitch(SwitchDevice):
     def is_on(self):
         """ True if device is on. """
         return self._state == STATE_ON
+
+    def update(self):
+        """ Called by the vera device callback to update state. """
+        if self.vera_device.is_switched_on():
+            self._state = STATE_ON
+        else:
+            self._state = STATE_OFF
diff --git a/homeassistant/components/verisure.py b/homeassistant/components/verisure.py
index 164835f07c7..2fdfb6eb8be 100644
--- a/homeassistant/components/verisure.py
+++ b/homeassistant/components/verisure.py
@@ -44,6 +44,7 @@ SHOW_THERMOMETERS = True
 SHOW_HYGROMETERS = True
 SHOW_ALARM = True
 SHOW_SMARTPLUGS = True
+CODE_DIGITS = 4
 
 # if wrong password was given don't try again
 WRONG_PASSWORD_GIVEN = False
@@ -61,11 +62,13 @@ def setup(hass, config):
 
     from verisure import MyPages, LoginError, Error
 
-    global SHOW_THERMOMETERS, SHOW_HYGROMETERS, SHOW_ALARM, SHOW_SMARTPLUGS
+    global SHOW_THERMOMETERS, SHOW_HYGROMETERS,\
+        SHOW_ALARM, SHOW_SMARTPLUGS, CODE_DIGITS
     SHOW_THERMOMETERS = int(config[DOMAIN].get('thermometers', '1'))
     SHOW_HYGROMETERS = int(config[DOMAIN].get('hygrometers', '1'))
     SHOW_ALARM = int(config[DOMAIN].get('alarm', '1'))
     SHOW_SMARTPLUGS = int(config[DOMAIN].get('smartplugs', '1'))
+    CODE_DIGITS = int(config[DOMAIN].get('code_digits', '4'))
 
     global MY_PAGES
     MY_PAGES = MyPages(
diff --git a/homeassistant/const.py b/homeassistant/const.py
index 97e26f8d33a..cb367af362a 100644
--- a/homeassistant/const.py
+++ b/homeassistant/const.py
@@ -1,7 +1,7 @@
 # coding: utf-8
 """ Constants used by Home Assistant components. """
 
-__version__ = "0.11.0.dev0"
+__version__ = "0.12.0.dev0"
 
 # Can be used to specify a catch all when registering state or event listeners.
 MATCH_ALL = '*'
diff --git a/requirements_all.txt b/requirements_all.txt
index f13bc77b1a6..b6d0af08ee0 100644
--- a/requirements_all.txt
+++ b/requirements_all.txt
@@ -62,7 +62,7 @@ tellcore-py==1.1.2
 # homeassistant.components.light.vera
 # homeassistant.components.sensor.vera
 # homeassistant.components.switch.vera
-pyvera==0.2.3
+pyvera==0.2.7
 
 # homeassistant.components.wink
 # homeassistant.components.light.wink
@@ -125,6 +125,9 @@ dnspython3==1.12.0
 # homeassistant.components.rfxtrx
 https://github.com/Danielhiversen/pyRFXtrx/archive/0.2.zip#RFXtrx==0.2
 
+# homeassistant.components.rpi_gpio
+# RPi.GPIO==0.6.1
+
 # homeassistant.components.sensor.bitcoin
 blockchain==1.1.2
 
@@ -149,10 +152,6 @@ https://github.com/HydrelioxGitHub/netatmo-api-python/archive/43ff238a0122b0939a
 # homeassistant.components.sensor.openweathermap
 pyowm==2.3.0
 
-# homeassistant.components.sensor.rpi_gpio
-# homeassistant.components.switch.rpi_gpio
-# RPi.GPIO==0.5.11
-
 # homeassistant.components.sensor.sabnzbd
 https://github.com/jamespcole/home-assistant-nzb-clients/archive/616cad59154092599278661af17e2a9f2cf5e2a9.zip#python-sabnzbd==0.1
 
diff --git a/script/nginx-hass b/script/nginx-hass
new file mode 100644
index 00000000000..9fc1725f043
--- /dev/null
+++ b/script/nginx-hass
@@ -0,0 +1,113 @@
+##
+#
+# Home Assistant - nginx Configuration File
+#
+# Using nginx as a proxy for Home Assistant allows you to serve Home Assisatnt
+# securely over standard ports. This configuration file and instructions will
+# walk you through setting up Home Assistant over a secure connection.
+#
+# 1) Get a domain name forwarded to your IP.
+#   Chances are, you have a dynamic IP Address (your ISP changes your address
+#   periodically). If this is true, you can use a Dynamic DNS service to obtain
+#   a domain and set it up to update with you IP. If you purchase your own
+#   domain name, you will be able to easily get a trusted SSL certificate
+#   later.
+#
+#
+# 2) Install nginx on your server.
+#   This will vary depending on your OS. Check out Google for this. After
+#   installing, ensure that nginx is not running.
+#
+#
+# 3) Obtain an SSL certificate.
+#
+# 3a) Using Let's Encrypt
+#   If you purchased your own domain, you can use https://letsencrypt.org/ to
+#   obtain a free, publicly trusted SSL certificate. This will allow you to
+#   work with services like IFTTT. Download and install per the instructions
+#   online and get a certificate using the following command.
+#
+#   ./letsencrypt-auto certonly --standalone -d example.com -d www.example.com
+#
+#   Instead of example.com, use your domain. You will need to renew this
+#   certificate every 90 days.
+#
+# 3b) Using openssl
+#   If you do not own your own domain, you may generate a self-signed
+#   certificate. This will not work with IFTTT, but it will encrypt all of your
+#   Home Assistant traffic.
+#
+#   openssl req -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -days 9999
+#   sudo cp key.pem cert.pem /etc/nginx/ssl
+#   sudo chmod 600 /etc/nginx/ssl/key.pem /etc/nginx/ssl/cert.pem
+#   sudo chown root:root /etc/nginx/ssl/key.pem /etc/nginx/ssl/cert.pem
+#
+#
+# 4) Create dhparams file
+#   As a fair warning, this file will take a while to generate.
+#
+#   cd /etc/nginx/ssl
+#   sudo openssl dhparam -out dhparams.pem 2048
+#
+#
+# 5) Install this configuration file in nginx.
+#
+#   cp nginx-hass /etc/nginx/sites-available/hass
+#   cd /etc/nginx/sites-enabled
+#   sudo unlink default
+#   sudo ln ../sites-available/hass default
+#
+#
+# 6) Double check this configuration to ensure all settings are correct and
+#   start nginx.
+#
+#
+# 7) Forward ports 443 and 80 to your server on your router. Do not forward
+#   port 8123.
+#
+##
+
+server {
+    # Update this line to be your domain
+    server_name example.com;
+
+
+    # These shouldn't need to be changed
+    listen 80 default_server;
+    listen [::]:80 default_server ipv6only=on;
+    return 301 https://$host$request_uri;
+}
+
+
+server {
+    # Update this line to be your domain
+    server_name example.com;
+
+    # Ensure these lines point to your SSL certificate and key
+    ssl_certificate /etc/letsencrypt/live/example.com/fullchain.pem;
+    ssl_certificate_key /etc/letsencrypt/live/example.com/privkey.pem;
+    # Use these lines instead if you created a self-signed certificate
+    # ssl_certificate /etc/nginx/ssl/cert.pem;
+    # ssl_certificate_key /etc/nginx/ssl/key.pem;
+
+    # Ensure this line points to your dhparams file
+    ssl_dhparam /etc/nginx/ssl/dhparams.pem;
+
+
+    # These shouldn't need to be changed
+    listen 443 default_server;
+    add_header Strict-Transport-Security "max-age=31536000; includeSubdomains";
+    ssl on;
+    ssl_protocols TLSv1 TLSv1.1 TLSv1.2;
+    ssl_ciphers "EECDH+AESGCM:EDH+AESGCM:AES256+EECDH:AES256+EDH:!aNULL:!eNULL:!EXPORT:!DES:!MD5:!PSK:!RC4";
+    ssl_prefer_server_ciphers on;
+    ssl_session_cache shared:SSL:10m;
+
+    proxy_buffering off;
+
+    location / {
+        proxy_pass http://localhost:8123;
+        proxy_set_header Host $host;
+        proxy_redirect http:// https://;
+    }
+}
diff --git a/tests/components/device_tracker/test_locative.py b/tests/components/device_tracker/test_locative.py
index 619fe929ac7..cd02380d324 100644
--- a/tests/components/device_tracker/test_locative.py
+++ b/tests/components/device_tracker/test_locative.py
@@ -203,3 +203,21 @@ class TestLocative(unittest.TestCase):
 
         state = hass.states.get('{}.{}'.format('device_tracker', data['device']))
         self.assertEqual(state.state, 'work')
+
+    def test_exit_first(self, update_config):
+        """ Test when an exit message is sent first on a new device """
+
+        data = {
+            'latitude': 40.7855,
+            'longitude': -111.7367,
+            'device': 'new_device',
+            'id': 'Home',
+            'trigger': 'exit'
+        }
+
+        # Exit Home
+        req = requests.get(_url(data))
+        self.assertEqual(200, req.status_code)
+
+        state = hass.states.get('{}.{}'.format('device_tracker', data['device']))
+        self.assertEqual(state.state, 'not_home')
diff --git a/tests/components/test_input_boolean.py b/tests/components/test_input_boolean.py
new file mode 100644
index 00000000000..ace91018ccd
--- /dev/null
+++ b/tests/components/test_input_boolean.py
@@ -0,0 +1,99 @@
+"""
+tests.components.test_input_boolean
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Tests input_boolean component.
+"""
+# pylint: disable=too-many-public-methods,protected-access
+import unittest
+
+from homeassistant.components import input_boolean
+from homeassistant.const import (
+    STATE_ON, STATE_OFF, ATTR_ICON, ATTR_FRIENDLY_NAME)
+
+from tests.common import get_test_home_assistant
+
+
+class TestInputBoolean(unittest.TestCase):
+    """ Test the input boolean module. """
+
+    def setUp(self):  # pylint: disable=invalid-name
+        self.hass = get_test_home_assistant()
+
+    def tearDown(self):  # pylint: disable=invalid-name
+        """ Stop down stuff we started. """
+        self.hass.stop()
+
+    def test_config(self):
+        """Test config."""
+        self.assertFalse(input_boolean.setup(self.hass, {
+            'input_boolean': None
+        }))
+
+        self.assertFalse(input_boolean.setup(self.hass, {
+            'input_boolean': {
+            }
+        }))
+
+        self.assertFalse(input_boolean.setup(self.hass, {
+            'input_boolean': {
+                'name with space': None
+            }
+        }))
+
+    def test_methods(self):
+        """ Test is_on, turn_on, turn_off methods. """
+        self.assertTrue(input_boolean.setup(self.hass, {
+            'input_boolean': {
+                'test_1': None,
+            }
+        }))
+        entity_id = 'input_boolean.test_1'
+
+        self.assertFalse(
+            input_boolean.is_on(self.hass, entity_id))
+
+        input_boolean.turn_on(self.hass, entity_id)
+
+        self.hass.pool.block_till_done()
+
+        self.assertTrue(
+            input_boolean.is_on(self.hass, entity_id))
+
+        input_boolean.turn_off(self.hass, entity_id)
+
+        self.hass.pool.block_till_done()
+
+        self.assertFalse(
+            input_boolean.is_on(self.hass, entity_id))
+
+    def test_config_options(self):
+        count_start = len(self.hass.states.entity_ids())
+
+        self.assertTrue(input_boolean.setup(self.hass, {
+            'input_boolean': {
+                'test_1': None,
+                'test_2': {
+                    'name': 'Hello World',
+                    'icon': 'work',
+                    'initial': True,
+                },
+            },
+        }))
+
+        self.assertEqual(count_start + 2, len(self.hass.states.entity_ids()))
+
+        state_1 = self.hass.states.get('input_boolean.test_1')
+        state_2 = self.hass.states.get('input_boolean.test_2')
+
+        self.assertIsNotNone(state_1)
+        self.assertIsNotNone(state_2)
+
+        self.assertEqual(STATE_OFF, state_1.state)
+        self.assertNotIn(ATTR_ICON, state_1.attributes)
+        self.assertNotIn(ATTR_FRIENDLY_NAME, state_1.attributes)
+
+        self.assertEqual(STATE_ON, state_2.state)
+        self.assertEqual('Hello World',
+                         state_2.attributes.get(ATTR_FRIENDLY_NAME))
+        self.assertEqual('work', state_2.attributes.get(ATTR_ICON))